RESPIREX CUFF LOCKING RING (RED)

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Chemical Resistant Hazmax Safety Boots 

Description

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

• Green Hazmax chemically resistant compound shaft certified to EN 13832-3.
• Conforms to EN 943-1 (Chemical protective clothing).
• 200 Joule Epoxy coated Steel toe cap.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Knitted nylon lining.
• Moisture absorbing insole (removable and machine washable).
• Also available in black (MOQ of 500 pairs).

Boot Sole

• Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Two to three times the wear resistance of conventional soles.
• Stainless steel, penetration resistant mid-sole.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system.
• Cold insulation.

Certifications

• EN 13832 pt 3, Chemical Protective Footwear.   
• EN ISO 20345 S5 HRO SRA CI FO, Safety Footwear.
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Care

• Machine washable at up to 40?.
• Shelf life of over 10 years.
• CE marked on the shaft with date and year of manufacture.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Gtl Disposable Suit

The fully encapsulating GTL is a Type 1A - ET single use gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The GTL suit is manufactured in Chemprotex™ 400, the latest Respirex material, which is a high performance chemical barrier, multi-layer nonwoven fabric, in a high visibility yellow colour. This suit represents the  latest in Gas Suit protection and is lighter in weight than suits currently available.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and taped for maximum performance.
• Kemblok™ chemically protective laminated glove welded to the suit material with an elasticated over sleeve to prevent splash entering the supplied neoprene outer gloves.
• Integral socks with outer splash guards.
• Tested to EN464 prior to despatch for leak-tightness.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Maintenance Free

Maintenance free for first seven years. An inspection and pressure test at year seven extendes the shelf life to ten years.

Specification

Material Resistance

• FINABEL 0.7.C Chemical Warfare Agents.
• EN14126:2003 Protective clothing against infective agents.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Gtl Disposable Suit

The fully encapsulating GTL is a Type 1A - ET single use gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The GTL suit is manufactured in Chemprotex™ 400, the latest Respirex material, which is a high performance chemical barrier, multi-layer nonwoven fabric, in a high visibility yellow colour. This suit represents the  latest in Gas Suit protection and is lighter in weight than suits currently available.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and taped for maximum performance.
• Kemblok™ chemically protective laminated glove welded to the suit material with an elasticated over sleeve to prevent splash entering the supplied neoprene outer gloves.
• Integral socks with outer splash guards.
• Tested to EN464 prior to despatch for leak-tightness.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Maintenance Free

Maintenance free for first seven years. An inspection and pressure test at year seven extendes the shelf life to ten years.

Specification

Material Resistance

• FINABEL 0.7.C Chemical Warfare Agents.
• EN14126:2003 Protective clothing against infective agents.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Gtl Disposable Suit

The fully encapsulating GTL is a Type 1A - ET single use gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The GTL suit is manufactured in Chemprotex™ 400, the latest Respirex material, which is a high performance chemical barrier, multi-layer nonwoven fabric, in a high visibility yellow colour. This suit represents the  latest in Gas Suit protection and is lighter in weight than suits currently available.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and taped for maximum performance.
• Kemblok™ chemically protective laminated glove welded to the suit material with an elasticated over sleeve to prevent splash entering the supplied neoprene outer gloves.
• Integral socks with outer splash guards.
• Tested to EN464 prior to despatch for leak-tightness.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Maintenance Free

Maintenance free for first seven years. An inspection and pressure test at year seven extendes the shelf life to ten years.

Specification

Material Resistance

• FINABEL 0.7.C Chemical Warfare Agents.
• EN14126:2003 Protective clothing against infective agents.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Gtl Disposable Suit

The fully encapsulating GTL is a Type 1A - ET single use gas-tight suit designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The GTL suit is manufactured in Chemprotex™ 400, the latest Respirex material, which is a high performance chemical barrier, multi-layer nonwoven fabric, in a high visibility yellow colour. This suit represents the  latest in Gas Suit protection and is lighter in weight than suits currently available.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and taped for maximum performance.
• Kemblok™ chemically protective laminated glove welded to the suit material with an elasticated over sleeve to prevent splash entering the supplied neoprene outer gloves.
• Integral socks with outer splash guards.
• Tested to EN464 prior to despatch for leak-tightness.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Maintenance Free

Maintenance free for first seven years. An inspection and pressure test at year seven extendes the shelf life to ten years.

Specification

Material Resistance

• FINABEL 0.7.C Chemical Warfare Agents.
• EN14126:2003 Protective clothing against infective agents.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Dielectric Boots With Steel Toe Cap

Description

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

• Yellow dielectric compound shaft.
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Non-wicking knitted nylon lining.
• Comfort insole (removable and machine washable).
• REACH Compliant.

Boot Sole

• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Cleated outsole for maximum grip.
• Two to three times the wear resistance of conventional soles.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system conforms to EN 20345 E.
• Cold insulation to EN ISO 20345.

Certifications

• EN ISO 20345 I E HRO SRA CI, Safety Footwear.
• EN 50321 Class 0, Electrically Insulating Footwear.
• ASTM F1117, Dielectric Footwear.       
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Electrical Protection

Complete boot:	20 kV	8 hours no damage
	5 kV	Less than 5mA Leakage current
Sole:	35 kV	3 minutes no damage

Care

• Machine washable at up to 40℃.
• Shelf life of over 10 years.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

All Dielectric overboots are fitted with a unique oil-resistant vulcanised blue rubber sole that gives excellent slip, wear and cut resistance.
• High-voltage-resistant dielectric compound
• Resists 20KV on the complete overboot
• Slip-resistant vulcanised blue rubber sole surpassing SATRA TM144 & EN13287
• Hard-wearing rubber sole increases life by 2 to 3 times
• Conforms to: EN50321, EN ISO 20347, ASTM F-2413, ASTM F1117, CSA Z195

Sizes

	Medium	Large	Extra-Large
UK	6-8	9-11	12-14
EU	39-42	43-45	46-49
US	7-9	10-12	13-15

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

RESPIREX SILENCER FOR RESPIREX SIMPLAIR HOOD

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Dielectric Boots With Steel Toe Cap

Description

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

• Yellow dielectric compound shaft.
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Non-wicking knitted nylon lining.
• Comfort insole (removable and machine washable).
• REACH Compliant.

Boot Sole

• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Cleated outsole for maximum grip.
• Two to three times the wear resistance of conventional soles.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system conforms to EN 20345 E.
• Cold insulation to EN ISO 20345.

Certifications

• EN ISO 20345 I E HRO SRA CI, Safety Footwear.
• EN 50321 Class 0, Electrically Insulating Footwear.
• ASTM F1117, Dielectric Footwear.       
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Electrical Protection

Complete boot:	20 kV	8 hours no damage
	5 kV	Less than 5mA Leakage current
Sole:	35 kV	3 minutes no damage

Care

• Machine washable at up to 40℃.
• Shelf life of over 10 years.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

OVERBOOTS

Dielectric overboots are ideal for personnel who have to continually enter and exit high voltage areas. They allow staff to keep their normal safety footwear on and simply slip on additional protection from high voltages when required. The Workmaster™ overboots feature an ingenious rear entry design which ensures the boot is extremely quick and easy both to fit and remove.

Available as a class 1 dielectric maxi overboot or a class 2 dielectric compact overboot.

The Workmaster™ electrically insulating dielectric overboot is approved to current European standards with a vulcanized rubber sole for superior slip resistance and provides protection of up to 20kV over the complete boot for over three minutes.

WORKMASTER DIELECTRIC MAXI OVERBOOT

An electrically insulating Class 1 dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The Respirex dielectric boot provides protection of up to 20kV over the complete boot for over three minutes.

Features

• Ingenious rear entry design ensures the boot is quick and easy to fit and remove
• Ideal for personnel who have to continually enter and exit hazardous areas
• REACH Compliant
• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
• Slip resistance performance twice that required by SATRA TM144 standards
• Fuel and oil resistant
• Resistance to hot contact 60 seconds 300°C.

Respirex Siren Suit In Neoprene 

Reusable one-piece chemical protective suits are available in a wide range of fabrics to provide the best possible protection in numerous industries. Suits feature nylon coarse tooth zips and a choice of  hook and loop fastener or press stud zip flaps. Zip can be central or from thigh to collar.

• Yellow neoprene.
• Reinforced cuffs.

Protection

N14605:2005+A1:2009 Type 3 and Type 4. Respirex chemical protective one piece suits worn together with appropriate gloves and safety boots will meet the performance requirements of Type 3 (liquid-tight) and Type 4 (spray-tight) clothing.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Chemical Resistant Hazmax Safety Boots 

Description

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

• Green Hazmax chemically resistant compound shaft certified to EN 13832-3.
• Conforms to EN 943-1 (Chemical protective clothing).
• 200 Joule Epoxy coated Steel toe cap.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Knitted nylon lining.
• Moisture absorbing insole (removable and machine washable).
• Also available in black (MOQ of 500 pairs).

Boot Sole

• Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Two to three times the wear resistance of conventional soles.
• Stainless steel, penetration resistant mid-sole.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system.
• Cold insulation.

Certifications

• EN 13832 pt 3, Chemical Protective Footwear.   
• EN ISO 20345 S5 HRO SRA CI FO, Safety Footwear.
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Care

• Machine washable at up to 40?.
• Shelf life of over 10 years.
• CE marked on the shaft with date and year of manufacture.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Hazmax Over Boot Green

 

• Overboot with antistatic Hazmax material
• Oil-resistant vulcanised rubber sole
• Resistant to hot contact 300 C
• Cleared outsole designed to maintain excellent grip during wear
• Shaft designed with kick-off lug and rear entry for ease of fitting
• Certified to: PPE DIR 89/686/EEC
• Conforms to EN ISO 20347, EN943, NFPA 1991, ASTM F 2413, CAS Z195 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.


- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Fog Off

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Neck Cloth

For attachment to a safety helmet to provide neck protection from chemical splashes.

• Available in a wide range of fabrics compatible with other garments in the chemical workwear range
• Can be fitted to most makes of safety helmet
• Designed for use where operators are dressed in either one-piece suits or jackets
• Particularly suitable for refineries with overhead pipework where protection from overhead splashes is essential
• Wrap around neck cloths offer greater face protection to the user

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Chemical Resistant Hazmax Safety Boots 

Description

A chemically protective anti-static boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance.

Boot Shaft

• Green Hazmax chemically resistant compound shaft certified to EN 13832-3.
• Conforms to EN 943-1 (Chemical protective clothing).
• 200 Joule Epoxy coated Steel toe cap.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Knitted nylon lining.
• Moisture absorbing insole (removable and machine washable).
• Also available in black (MOQ of 500 pairs).

Boot Sole

• Black vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Two to three times the wear resistance of conventional soles.
• Stainless steel, penetration resistant mid-sole.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system.
• Cold insulation.

Certifications

• EN 13832 pt 3, Chemical Protective Footwear.   
• EN ISO 20345 S5 HRO SRA CI FO, Safety Footwear.
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Care

• Machine washable at up to 40?.
• Shelf life of over 10 years.
• CE marked on the shaft with date and year of manufacture.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Dielectric Boots With Steel Toe Cap

Description

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

• Yellow dielectric compound shaft.
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Non-wicking knitted nylon lining.
• Comfort insole (removable and machine washable).
• REACH Compliant.

Boot Sole

• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Cleated outsole for maximum grip.
• Two to three times the wear resistance of conventional soles.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system conforms to EN 20345 E.
• Cold insulation to EN ISO 20345.

Certifications

• EN ISO 20345 I E HRO SRA CI, Safety Footwear.
• EN 50321 Class 0, Electrically Insulating Footwear.
• ASTM F1117, Dielectric Footwear.       
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Electrical Protection

Complete boot:	20 kV	8 hours no damage
	5 kV	Less than 5mA Leakage current
Sole:	35 kV	3 minutes no damage

Care

• Machine washable at up to 40℃.
• Shelf life of over 10 years.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Dielectric Boots With Steel Toe Cap

Description

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

• Yellow dielectric compound shaft.
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Non-wicking knitted nylon lining.
• Comfort insole (removable and machine washable).
• REACH Compliant.

Boot Sole

• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Cleated outsole for maximum grip.
• Two to three times the wear resistance of conventional soles.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system conforms to EN 20345 E.
• Cold insulation to EN ISO 20345.

Certifications

• EN ISO 20345 I E HRO SRA CI, Safety Footwear.
• EN 50321 Class 0, Electrically Insulating Footwear.
• ASTM F1117, Dielectric Footwear.       
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Electrical Protection

Complete boot:	20 kV	8 hours no damage
	5 kV	Less than 5mA Leakage current
Sole:	35 kV	3 minutes no damage

Care

• Machine washable at up to 40℃.
• Shelf life of over 10 years.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Hazmax Over Boot Green

 

• Overboot with antistatic Hazmax material
• Oil-resistant vulcanised rubber sole
• Resistant to hot contact 300 C
• Cleared outsole designed to maintain excellent grip during wear
• Shaft designed with kick-off lug and rear entry for ease of fitting
• Certified to: PPE DIR 89/686/EEC
• Conforms to EN ISO 20347, EN943, NFPA 1991, ASTM F 2413, CAS Z195 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.


- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.


- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.


- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.


- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Chemical Protective Yellow Neoprene Bib Trousers

Bib-Trousers in Yellow Neoprene with red webbing braces and buckles at the front. Shown with plain hem legs with Velcro securing strips.

• Elasticated legs & stirrups

Specifications

Product Codes:	BTRS002/17
Sizes:	S, M, L, XL, XXL, XXXL

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Chemical Protective Yellow Neoprene Bib Trousers

Bib-Trousers in Yellow Neoprene with red webbing braces and buckles at the front. Shown with plain hem legs with Velcro securing strips.

• Elasticated legs & stirrups

Specifications

Product Codes:	BTRS002/17
Sizes:	S, M, L, XL, XXL, XXXL

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Siren Suit In Neoprene 

Reusable one-piece chemical protective suits are available in a wide range of fabrics to provide the best possible protection in numerous industries. Suits feature nylon coarse tooth zips and a choice of  hook and loop fastener or press stud zip flaps. Zip can be central or from thigh to collar.

• Yellow neoprene.
• Reinforced cuffs.

Protection

N14605:2005+A1:2009 Type 3 and Type 4. Respirex chemical protective one piece suits worn together with appropriate gloves and safety boots will meet the performance requirements of Type 3 (liquid-tight) and Type 4 (spray-tight) clothing.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex SIMH107/37 Simplair Air Supplied Hood

• Provides partial body protection and is designed to be worn in conjunction with other suitable items of protective clothing.
• Air system contained within the hood provides breathing air to the wearer with an audible warning device designed to activate if the airflow drops below the minimum level required to keep CO2 levels below 1%.
• C2 PVC material.
• Front & rear cape panels provide protection to well below the wearer’s chest area Drawstring neck seal.
• Air system is supported by an adjustable waist belt, fitted with a foam back pad for maximum wearer comfort.
• Twin exhalation valves.
• A durable rigid PVC visor giving a high degree of undistorted vision.
• Fitted with D01076 CEJN plug.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Dielectric Boots With Steel Toe Cap

Description

An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.

Boot Shaft

• Yellow dielectric compound shaft.
• 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
• Seamless construction.
• Kick off lug.
• Extra shin protection.
• Adjustable height.
• Ankle guard.
• Non-wicking knitted nylon lining.
• Comfort insole (removable and machine washable).
• REACH Compliant.

Boot Sole

• Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
• Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
• Cleated outsole for maximum grip.
• Two to three times the wear resistance of conventional soles.
• Fuel and oil resistant.
• Greater cut resistance than conventional soles.
• Resistance to hot contact 60 seconds 300℃.
• Energy absorbing tunnel system conforms to EN 20345 E.
• Cold insulation to EN ISO 20345.

Certifications

• EN ISO 20345 I E HRO SRA CI, Safety Footwear.
• EN 50321 Class 0, Electrically Insulating Footwear.
• ASTM F1117, Dielectric Footwear.       
• PPE DIR 89/686/EEC, Personal Protective Equipment.

Specifications

Electrical Protection

Complete boot:	20 kV	8 hours no damage
	5 kV	Less than 5mA Leakage current
Sole:	35 kV	3 minutes no damage

Care

• Machine washable at up to 40℃.
• Shelf life of over 10 years.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

All Dielectric overboots are fitted with a unique oil-resistant vulcanised blue rubber sole that gives excellent slip, wear and cut resistance.
• High-voltage-resistant dielectric compound
• Resists 20KV on the complete overboot
• Slip-resistant vulcanised blue rubber sole surpassing SATRA TM144 & EN13287
• Hard-wearing rubber sole increases life by 2 to 3 times
• Conforms to: EN50321, EN ISO 20347, ASTM F-2413, ASTM F1117, CSA Z195

Sizes

	Medium	Large	Extra-Large
UK	6-8	9-11	12-14
EU	39-42	43-45	46-49
US	7-9	10-12	13-15

 

 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

RESPIREX ALUMINISED FIVE FINGER GLOVES

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

RESPIREX SOLAS GLOVES

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

RESPIREX ALUMINISED SOLAS CLOSE PROXIMITY SUIT (JKT017/91L), (OTRS006/91L)

Close proximity marine fire suit. Aluminised jacket with a high felt covered collar and Velcro front fastening. Jacket sleeves taper to a narrow cuff to allow gauntlet gloves to be worn over the exterior. High waisted aluminised trousers with centre front Velcro opening and elasticated ankles.

Suit trousers are supported by adjustable braces. Five finger gauntlet gloves with aluminised backs and heat resistant leather palms. Rubber knee length boots with internal steel toecap conforming to EN345-1: 1993. The suit is not fire entry clothing.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

RESPIREX ALUMINISED SOLAS CLOSE PROXIMITY SUIT (JKT017/91M), (OTRS006/91M)

Close proximity marine fire suit. Aluminised jacket with a high felt covered collar and Velcro front fastening. Jacket sleeves taper to a narrow cuff to allow gauntlet gloves to be worn over the exterior. High waisted aluminised trousers with centre front Velcro opening and elasticated ankles.

Suit trousers are supported by adjustable braces. Five finger gauntlet gloves with aluminised backs and heat resistant leather palms. Rubber knee length boots with internal steel toecap conforming to EN345-1: 1993. The suit is not fire entry clothing.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex 10 Metre Yellow Airline

Description

Standard Yellow Hose

• Yellow reinforced PVC hose supplied in 10m, 20m and 30m lengths as standard, different lengths can be supplied if requested. 
• Bore size 9.5mm (3/8”), outside diameter 16mm.

Features

• All hoses have a working pressure of 10 Bar.
• Tested in accordance with EN14594.
• All Respirex hoses and couplings are certified at 1,000 N. pull test and burst pressures of 30 Bar.
• All hose fittings are designed and manufactured by Respirex.
• All hoses are printed with CE marking information.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.