|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 3 (MARK TO 20KV)
810RILB00950
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 3 (MARK TO 20KV)
810RILB00950
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 4 (MARK TO 20KV)
810RILB00951
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 4 (MARK TO 20KV)
810RILB00951
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 5 (MARK TO 20KV)
810RILB00952
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 5 (MARK TO 20KV)
810RILB00952
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 6 (MARK TO 20KV)
810RILB00953
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 6 (MARK TO 20KV)
810RILB00953
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 7 (MARK TO 20KV)
810RILB00954
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 7 (MARK TO 20KV)
810RILB00954
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 8 (MARK TO 20KV)
810RILB00955
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 8 (MARK TO 20KV)
810RILB00955
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 9 (MARK TO 20KV)
810RILB00956
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 9 (MARK TO 20KV)
810RILB00956
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 10 (MARK TO 20KV)
810RILB00957
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 10 (MARK TO 20KV)
810RILB00957
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 11 (MARK TO 20KV)
810RILB00958
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 11 (MARK TO 20KV)
810RILB00958
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 12 (MARK TO 20KV)
810RILB00959
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
RESPIREX DIELECTRIC BOOTS WITH STEEL TOE CAP AND RUBBER SOLE, SIZE 12 (MARK TO 20KV)
810RILB00959
Respirex Dielectric Boots With Steel Toe Cap
Description
An electrically insulating dielectric boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. The Respirex Dielectric boot provides high voltage protection of up to 20kV over the complete boot for over 8 hours, and 35kV over the sole for 3 minutes.
Boot Shaft
- Yellow dielectric compound shaft.
- 200 Joule Epoxy coated Steel toe cap to EN ISO 20345.
- Seamless construction.
- Kick off lug.
- Extra shin protection.
- Adjustable height.
- Ankle guard.
- Non-wicking knitted nylon lining.
- Comfort insole (removable and machine washable).
- REACH Compliant.
Boot Sole
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole.
- Slip resistance performance twice that required by EN 13287 SRA and SATRA TM144 standards.
- Cleated outsole for maximum grip.
- Two to three times the wear resistance of conventional soles.
- Fuel and oil resistant.
- Greater cut resistance than conventional soles.
- Resistance to hot contact 60 seconds 300℃.
- Energy absorbing tunnel system conforms to EN 20345 E.
- Cold insulation to EN ISO 20345.
Certifications
- EN ISO 20345 I E HRO SRA CI, Safety Footwear.
- EN 50321 Class 0, Electrically Insulating Footwear.
- ASTM F1117, Dielectric Footwear.
- PPE DIR 89/686/EEC, Personal Protective Equipment.
Specifications
Electrical Protection
| Complete boot: |
20 kV |
8 hours no damage |
| |
5 kV |
Less than 5mA Leakage current |
| Sole: |
35 kV |
3 minutes no damage |
Care
- Machine washable at up to 40℃.
- Shelf life of over 10 years.
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
RESPIREX
RESPIREX DIELECTRIC OVERBOOTS, SIZE MEDIUM (MARK TO 20KV)
810RILB01170
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC OVERBOOTS, SIZE MEDIUM (MARK TO 20KV)
810RILB01170
All Dielectric overboots are fitted with a unique oil-resistant vulcanised blue rubber sole that gives excellent slip, wear and cut resistance.
• High-voltage-resistant dielectric compound
• Resists 20KV on the complete overboot
• Slip-resistant vulcanised blue rubber sole surpassing SATRA TM144 & EN13287
• Hard-wearing rubber sole increases life by 2 to 3 times
• Conforms to: EN50321, EN ISO 20347, ASTM F-2413, ASTM F1117, CSA Z195 Sizes
| |
Medium |
Large |
Extra-Large |
| UK |
6-8 |
9-11 |
12-14 |
| EU |
39-42 |
43-45 |
46-49 |
| US |
7-9 |
10-12 |
13-15 |
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC OVERBOOTS, SIZE LARGE (MARK TO 20KV)
810RILB01171
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC OVERBOOTS, SIZE LARGE (MARK TO 20KV)
810RILB01171
All Dielectric overboots are fitted with a unique oil-resistant vulcanised blue rubber sole that gives excellent slip, wear and cut resistance.
• High-voltage-resistant dielectric compound
• Resists 20KV on the complete overboot
• Slip-resistant vulcanised blue rubber sole surpassing SATRA TM144 & EN13287
• Hard-wearing rubber sole increases life by 2 to 3 times
• Conforms to: EN50321, EN ISO 20347, ASTM F-2413, ASTM F1117, CSA Z195 Sizes
| |
Medium |
Large |
Extra-Large |
| UK |
6-8 |
9-11 |
12-14 |
| EU |
39-42 |
43-45 |
46-49 |
| US |
7-9 |
10-12 |
13-15 |
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 6/39
810RILB01726
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 6/39
810RILB01726
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.
- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 7/41
810RILB01727
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 7/41
810RILB01727
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.
- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 8/42
810RILB01728
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 8/42
810RILB01728
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.
- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 9/43
810RILB01729
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 9/43
810RILB01729
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.
- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 10/44
810RILB01730
|
|
|
|
RESPIREX
RESPIREX DIELECTRIC HV3 MOULDED SOLE, UK SIZE 10/44
810RILB01730
A Class 3 AC (EN 50321-1:2018) electrically insulating dielectric boot with an integral steel toe cap. The Workmaster™ Dielectric HV3+ boot allows high voltage live working at up to 26.5kV with every boot tested at 30kV.
- Lightweight design for increased wearer comfort
- Low temperature flexibility down to -40ºC
- Durable, slip resistant vulcanised rubber for maximum grip
- Energy absorbing tunnel system in heel and ergonomic cushioning insole (removable and machine washable) for greater wearer comfort
- Cold insulation to EN ISO 20345
- High-visibility green HV3 compound shaft
- Meets the requirements of ASTM 1117 (20kV)
- Also available in a moulded sole version (without fuel & oil resistance, resistance to hot contact or cold insulation for the sole and SRA slip)
About Respirex
Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.
|
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 10
920SAL21405S10
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 10
920SAL21405S10
Salisbury Deep Heel Overboot - 21405
Dielectric overboots were designed to have a wider neck opening – which typically allows the users to gear up for their work day with ease. The wider opening of the boots is intended to make it easier to put on and take off at the beginning and end of every work day. It’s also why we’ve added convenient pull handles, to help workers pull the boot over their daily work boot with ease. In addition, we have added a kick-off ledge on the back heel of the boot that helps in easy removal.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
- New color style denoting ASTM F1117 20kV dielectric performance.
- Deep Heel Wide Throat Boots .
|
|
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 11
920SAL21405S11
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 11
920SAL21405S11
Salisbury Deep Heel Overboot - 21405
Dielectric overboots were designed to have a wider neck opening – which typically allows the users to gear up for their work day with ease. The wider opening of the boots is intended to make it easier to put on and take off at the beginning and end of every work day. It’s also why we’ve added convenient pull handles, to help workers pull the boot over their daily work boot with ease. In addition, we have added a kick-off ledge on the back heel of the boot that helps in easy removal.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
- New color style denoting ASTM F1117 20kV dielectric performance.
- Deep Heel Wide Throat Boots .
|
|
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 12
920SAL21405S12
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY 21405 DEEP HEEL OVERBOOT, SIZE 12
920SAL21405S12
Salisbury Deep Heel Overboot - 21405
Dielectric overboots were designed to have a wider neck opening – which typically allows the users to gear up for their work day with ease. The wider opening of the boots is intended to make it easier to put on and take off at the beginning and end of every work day. It’s also why we’ve added convenient pull handles, to help workers pull the boot over their daily work boot with ease. In addition, we have added a kick-off ledge on the back heel of the boot that helps in easy removal.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
- New color style denoting ASTM F1117 20kV dielectric performance.
- Deep Heel Wide Throat Boots .
|
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 10
920SAL21406S10
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 10
920SAL21406S10
Salisbury ASTM F1117 Dielectric Footwear - 21406
- All conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are 100% tested to ASTM F1116 @ 20kV.
- 100% tested as required by standard.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof.
- Nonskid Bar Tread outsole.
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
|
|
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 11
920SAL21406S11
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 11
920SAL21406S11
Salisbury ASTM F1117 Dielectric Footwear - 21406
- All conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are 100% tested to ASTM F1116 @ 20kV.
- 100% tested as required by standard.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof.
- Nonskid Bar Tread outsole.
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
|
|
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 7
920SAL21406S7
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 7
920SAL21406S7
Salisbury ASTM F1117 Dielectric Footwear - 21406
- All conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are 100% tested to ASTM F1116 @ 20kV.
- 100% tested as required by standard.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof.
- Nonskid Bar Tread outsole.
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
|
|
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 8
920SAL21406S8
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 8
920SAL21406S8
Salisbury ASTM F1117 Dielectric Footwear - 21406
- All conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are 100% tested to ASTM F1116 @ 20kV.
- 100% tested as required by standard.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof.
- Nonskid Bar Tread outsole.
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
|
|
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 9
920SAL21406S9
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM F1117 DIELECTRIC FOOTWEAR-12" 1 BUCKLE, FULL CUT OVERSHOE, DEEP HEEL, SIZE 9
920SAL21406S9
Salisbury ASTM F1117 Dielectric Footwear - 21406
- All conform with ASTM F1117 "Standard Specification for Dielectric Overshoe Footwear" and are 100% tested to ASTM F1116 @ 20kV.
- 100% tested as required by standard.
- Premium grade ozone resistant rubber.
- Flexible hand-layered construction-100% waterproof.
- Nonskid Bar Tread outsole.
- Designed to provide utility workers and contractors additional protection from electrical hazards.
- Wider upper boot with integral pull up handles intended to facilitate donning over standard work boots.
- Rear kick-off ledge designed for hassle-free removal.
- Reflective stripe for enhanced visibility.
|
|
SALISBURY
SALISBURY 2 BUCKLE, GUSSET OVERSHOE, DEEP HEEL, WHOLE SIZE 10
920SAL51509S10
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY 2 BUCKLE, GUSSET OVERSHOE, DEEP HEEL, WHOLE SIZE 10
920SAL51509S10
Salisbury 2 Buckle, Gusset Overshoe, Deep Heel - 51509
All of Salisbury’s ASTM Dielectric Footwear conforms with ASTM F1117 and all are 100% tested to the electrical hazard requirements of ASTM F1116 at 20,000 volts.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. This 2 Buckle Overshoe comes in Whole Sizes 7 - 17.
- Color: Red/Black.
- Material: Ozone resistant rubber with nylon lining, nonmetallic buckle and hardware.
- Outsole: Non-skid bar tread.
- Standards: ASTM F1117 & F1116 at 20kV.
|
|
|
SALISBURY
SALISBURY 2 BUCKLE, GUSSET OVERSHOE, DEEP HEEL, WHOLE SIZE 13
920SAL51509S13
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY 2 BUCKLE, GUSSET OVERSHOE, DEEP HEEL, WHOLE SIZE 13
920SAL51509S13
Salisbury 2 Buckle, Gusset Overshoe, Deep Heel - 51509
All of Salisbury’s ASTM Dielectric Footwear conforms with ASTM F1117 and all are 100% tested to the electrical hazard requirements of ASTM F1116 at 20,000 volts.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. This 2 Buckle Overshoe comes in Whole Sizes 7 - 17.
- Color: Red/Black.
- Material: Ozone resistant rubber with nylon lining, nonmetallic buckle and hardware.
- Outsole: Non-skid bar tread.
- Standards: ASTM F1117 & F1116 at 20kV.
|
|
SALISBURY
SALISBURY DIELECTRIC OVERSHOE, BOB SOLE & NON-BUCKLE, SIZE 10
920SAL51511/10
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY DIELECTRIC OVERSHOE, BOB SOLE & NON-BUCKLE, SIZE 10
920SAL51511/10
Salisbury Dielectric Overshoe -51511
Salisbury now offers improved 51511 non-buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off. This Bob Sole - Non-Buckle Overboot, comes in Whole Sizes 7-16.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole
|
|
|
SALISBURY
SALISURY DIELECTRIC OVERSHOE, BOB SOLE & NON-BUCKLE, SIZE 9
920SAL51511/9
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISURY DIELECTRIC OVERSHOE, BOB SOLE & NON-BUCKLE, SIZE 9
920SAL51511/9
Salisbury Dielectric Overshoe -51511
Salisbury now offers improved 51511 non-buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off. This Bob Sole - Non-Buckle Overboot, comes in Whole Sizes 7-16.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole
|
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 10
920SAL51512/10
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 10
920SAL51512/10
Salisbury Astm Dielectric Overshoe - 51512
Salisbury now offers improved 51512 two- buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. This Bob Sole - 2 Buckle Overshoe comes in Whole Sizes 7-16.
|
|
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 11
920SAL51512/11
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 11
920SAL51512/11
Salisbury Astm Dielectric Overshoe - 51512
Salisbury now offers improved 51512 two- buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. This Bob Sole - 2 Buckle Overshoe comes in Whole Sizes 7-16.
|
|
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 9
920SAL51512/9
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY ASTM DIELECTRIC OVERSHOE-BOB SOLE, 2 BUCKLE SIZE 9
920SAL51512/9
Salisbury Astm Dielectric Overshoe - 51512
Salisbury now offers improved 51512 two- buckle overshoe. The improved overshoes include a bob sole with aggressive tread for better traction. The deep heel and improved arch are specially designed for climbing ladders comfortably. The wider opening allows for easier on/off.ASTM Dielectric Footwear provides extra safety when climbing ladders and poles where the deep heel cavity can lock onto the rungs. These boots and overshoes are 100% waterproof and made from premium grade ozone resistant rubber. The construction is hand-layered in full-cut patterns to fit over work boots. The fabric lining makes them easy to get on and off. The sole has a durable construction with a non-skid bar tread outsole. This Bob Sole - 2 Buckle Overshoe comes in Whole Sizes 7-16.
|
|
SALISBURY
SALISBURY HOT STICK, UNIVERSAL HEAD ONE END, 1.25" X 10'
920SAL9919
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
SALISBURY
SALISBURY HOT STICK, UNIVERSAL HEAD ONE END, 1.25" X 10'
920SAL9919
|
|
SALISBURY
SALISBURY UNIVERSAL NEMA CUTOUT PRONG
920SAL9971
|
|
|
|
SALISBURY
SALISBURY UNIVERSAL NEMA CUTOUT PRONG
920SAL9971
Salisbury Universal Light Duty Cutout Prong - 9971
For general purpose of opening and closing of cutouts, handling of wires, cables, limbs etc.
- Type : Universal Splined Fitting.
- Application : Cutout, Light Duty Prong.
- Material : Bronze.
|
|
RESPIREX
DIELECTRIC MAXI OVERBOOTS, SIZE XL
810RILB01172
|
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY
OUT OF STOCK
SG 0 PAIR
|
RESPIREX
DIELECTRIC MAXI OVERBOOTS, SIZE XL
810RILB01172
OVERBOOTS
Dielectric overboots are ideal for personnel who have to continually enter and exit high voltage areas. They allow staff to keep their normal safety footwear on and simply slip on additional protection from high voltages when required. The Workmaster™ overboots feature an ingenious rear entry design which ensures the boot is extremely quick and easy both to fit and remove.
Available as a class 1 dielectric maxi overboot or a class 2 dielectric compact overboot.
The Workmaster™ electrically insulating dielectric overboot is approved to current European standards with a vulcanized rubber sole for superior slip resistance and provides protection of up to 20kV over the complete boot for over three minutes.
WORKMASTER DIELECTRIC MAXI OVERBOOT
An electrically insulating Class 1 dielectric overboot approved to current European standards with a vulcanized rubber sole for superior slip resistance. The Respirex dielectric boot provides protection of up to 20kV over the complete boot for over three minutes. Features
- Ingenious rear entry design ensures the boot is quick and easy to fit and remove
- Ideal for personnel who have to continually enter and exit hazardous areas
- REACH Compliant
- Blue vulcanized rubber sole for maximum grip - 30% better than a conventional safety boot sole
- Slip resistance performance twice that required by SATRA TM144 standards
- Fuel and oil resistant
- Resistance to hot contact 60 seconds 300°C.
|
