T4 Portable Multigas Detector

Portable multigas detector provides effective protection against 4 common gas hazards: carbon monoxide, hydrogen sulphide, flammable gases and oxygen depletion.

Now with improved detection of pentane, hexane and other long chain hydrocarbons.

Offering you compliance, robustness and low cost of ownership in a simple to use solution. T4 contains a wide range of powerful features to make everyday use easier and safer.

T4 is Crowcon's personal protection solution for detecting the four most common gas hazards:

• carbon monoxide
• hydrogen sulphide
• flammable gases 
• oxygen depletion

Offering you compliance, robustness and low cost of ownership in a simple to use solution. The large single button and intuitive menu system allows T4 to be operated wearing gloves with minimal training.

Crowcon's toughest portable yet, T4 is durable by design and includes an integrated rubber boot as standard. An optional clip-on filter cover, which is easily removed and replaced, ensures sensors are protected in the dirtiest environments. Drop tested to 4m and well protected from water ingress through IP65 and IP67 certification, T4 allows uninterrupted working in the most demanding environments.

Now with improved detection of pentane, hexane and other long chain hydrocarbons.

T4 contains a wide range of powerful features to make everyday use easier and safer:

TWA Resume

Unique to T4, the TWA Resume function ensures toxic gas exposure is calculated accurately over an entire shift, even if T4 is switched off for a break or during travel to another site. 

When most portable detectors are turned off, the algorithm that assesses TWA exposure assumes that it’s the end of the shift. When turned on again, these detectors act as if it is a new work shift, ignoring all previous measurements. The TWA Resume function however, provides the option to include previous measurements from within the correct time frame. 

18 hour battery

With a battery life of 18 hours, T4 allows multiple or longer shifts to be worked between recharging.

Positive Safety

Crowcon's visual 'traffic light' indication, provides constant visual assurance that T4 is operating soundly and conforms to site bump test & calibration policy. The bright green and red Positive Safety LEDs are visible to all and offer a quick, simple and comprehensive indication of monitor status to both the user and others around them.

Accessories

T4 is complemented by a range of accessories including:

• Multiple charging options
• Portables Pro 2.0 software for accessing advanced T4 features and data logs
• Clip on dust filter plates for extra sensor protection in dirtier environments 
• I-Test which makes easy work of calibrating, bump testing and managing larger fleets of T4s.

Contact [email protected] for more information.

 Specifications

 * Toxic and oxygen sensors are not rated for continuous operation above 50°C (122°F)

Gases and Ranges

About CROWCON

Crowcon provides gas detectors to fit your needs. Portable or fixed, Single or Multigas, Crowcon detectors will warn you of gaseous hazards before it's too late. Protecting people and the environment from gas hazards.

Crowcon-Pro TK

Gas-Pro TK dual range portable monitor measures the concentration of flammable gas in inerted tanks. Available for methane, butane and propane, Gas-Pro TK uses a dual IR sensor – the best technology for this specialist environment, which means Gas-Pro TK dual IR:

• Isn’t inhibited by high hydrocarbon concentrations unlike catalytic bead sensor;
• measures gas in high %vol as well as %LEL concentration, which single IR sensors can’t;
• auto-ranges switch between %vol and %LEL measurement, so always operating to the correct parameter.

Gas-Pro TK keeps you up-to-the moment with oxygen concentrations in the tank; telling you when the oxygen levels are;

• low enough to load and store fuel safely;
• high enough for safe tank entry.

Tanks can be sampled quickly from their top, middle or base, due to an integrated pump which draws samples through a line up to 30m long.

Offering detection of up to five gases in a compact and rugged solution, Gas-Pro TK has an easy-to-read top mount display, combining ease of use and user focused features. At 340g, it is light enough to clip to your belt or overalls, so it easy for the technician to keep with them during their working day.

specifications

Size: 43 x 130 x 84mm (1.7 x 5.1 x 3.3ins)
Weight: 340g (11.9oz)
Alarms:
Audible 95dB
Visual – all angle dual red/blue LEDs
Vibrating alert
Display: Bright top mounted display can be viewed while worn
Data logging: 125hr at 10-second intervals (45,000 logs)
Event logging: 1000 events
Battery: Rechargeable Li-ion, 13 hour typical runtime (4 sensors, pump running)
Typical charge time 7.5hr
Sampling: Internal pump with 30m draw
Operating temperature:-20°C to +55°C (-4°F to +131°F)
Humidity: 10 to 95% RH non-condensing
Ingress protection: Independently tested to IP65 and IP67
Approvals: IECEx: Ex db ia IIC T4 Gb Tamb -20°C to +55°C
ATEX: II 2 G Ex db ia IIC T4 Gb Tamb -20°C to +55°C
UL: Class 1, Division 1, Groups A, B, C, and D UL 913, UL 60079-0 and UL 60079-11
INMETRO: Ex db ia IIC T4 Gb Tamb -20°C to +55°C
Marine Equipment Directive: MED 1500009
Compliance: FCC and CE. Complies with EMC Directive 2014/30/EU, EN50270 and EMC FFC CFR 47 Part 15, ICES-003
Crowcon Connect Compatible? : Yes

CROWCON Gas-Pro PID for VOCs

Gas-Pro PID gives you full flexibility with a wide range of gas types to choose from. With an optional pump, the Gas-Pro PID is the perfect product addressing the requirements of a wide range of applications.

Overview

Gas-Pro PID utilises the Photo Ionization Detection technology to allow you to detect hundreds of Volatile Organic Compounds (VOCs). If you are working in an environment that is high in levels of solvents, glues, paints and general VOCs, the Gas-Pro PID will monitor your safety. With its dual-coloured display, the monitor will alert the user with its 95db audible alarm and its dual-coloured visual alarm bars.

PID Technology
 
Crowcon's PID works with a 10.6 electron volt lamp. This sensor is the most stable sensor on the market and offers the detection of a wide range of VOCs. The sensor has an internal UV light source, which the gas sample passes through. An electron is released for gases with an ionization potential of 10.6. 

User friendly:

• Top mount display  - Makes it easy to read at a glance for quick decision-making
• Simple single button operation - Limited training required
• Ergonomically designed - Sits well when worn and fits easily in the hand

Flexibility:

• Monitors 5 gases from many different options - Hundreds of variants to choose from
• Pumped and diffusion solutions - Offers multiple uses within one compact detector
• Multiple languages - Regionally configurable
• Automatic fail-safe flow pump plate recognition - Simple to use and no tools required
• Specific and unique Pre-Entry Check (PEC) mode - Takes away the pain of pre-entry testing
• PID correction factor - Set to target VOCs

Reliability:

• Broad range PID - Hundreds of gases detected
• Water and dust resistant to IP65 and IP66 - Capable of withstanding harsh environments
• Bump and calibration reminders  - Full compliance
• Positive/+ve Safety - Full site compliance
• Strong pump - Up to 30m sampling

Specifications

Gases and Ranges

CROWCON Gas-Pro PID for VOCs- PID, CH4, 02, H2S & CO

Gas-Pro PID gives you full flexibility with a wide range of gas types to choose from. With an optional pump, the Gas-Pro PID is the perfect product addressing the requirements of a wide range of applications.

Overview

Gas-Pro PID utilises the Photo Ionization Detection technology to allow you to detect hundreds of Volatile Organic Compounds (VOCs). If you are working in an environment that is high in levels of solvents, glues, paints and general VOCs, the Gas-Pro PID will monitor your safety. With its dual-coloured display, the monitor will alert the user with its 95db audible alarm and its dual-coloured visual alarm bars.

PID Technology
 
Crowcon's PID works with a 10.6 electron volt lamp. This sensor is the most stable sensor on the market and offers the detection of a wide range of VOCs. The sensor has an internal UV light source, which the gas sample passes through. An electron is released for gases with an ionization potential of 10.6. 

User friendly:

• Top mount display  - Makes it easy to read at a glance for quick decision-making
• Simple single button operation - Limited training required
• Ergonomically designed - Sits well when worn and fits easily in the hand

Flexibility:

• Monitors 5 gases from many different options - Hundreds of variants to choose from
• Pumped and diffusion solutions - Offers multiple uses within one compact detector
• Multiple languages - Regionally configurable
• Automatic fail-safe flow pump plate recognition - Simple to use and no tools required
• Specific and unique Pre-Entry Check (PEC) mode - Takes away the pain of pre-entry testing
• PID correction factor - Set to target VOCs

Reliability:

• Broad range PID - Hundreds of gases detected
• Water and dust resistant to IP65 and IP66 - Capable of withstanding harsh environments
• Bump and calibration reminders  - Full compliance
• Positive/+ve Safety - Full site compliance
• Strong pump - Up to 30m sampling

Specifications

Gases and Ranges

Portable Multi-gas Detector (6 gases maximum) E6000

E6000 is a united gas detector measuring maximum six (6) gases, to protect the disasters caused by the O2 deficiency, toxic gas poisoning and combustible gas explosion. It measures continuously maximum six gases of combustible gas, O2 and toxic gases, and displays their concentrations. Once the risk occurs, it also raises the alarm (visual, audible and vibrative). By adopting interchangeable smart sensor module, it can be made for detecting 5 gases and 6 gases.

Features:

• Interchangeable smart sensor module
• Intrinsically safe
• MOS, catalytic, electrochemical, infrared, PID sensors selectable
• Built-in sampling pump (optional)
• Visual, audible and vibrative alarm
• Adjustable alarm levels and span calibration value
• STEL and TWA alarm for toxic gases
• Password management
• Real-time clock
• Self-test after power on
• Self-diagonstic and self-correction function
• GPS, GPRS and man down function (optional)

Specifications:

Portable Multi-gas Detector (6 gases maximum) E6000

E6000 is a united gas detector measuring maximum six (6) gases, to protect the disasters caused by the O2 deficiency, toxic gas poisoning and combustible gas explosion. It measures continuously maximum six gases of combustible gas, O2 and toxic gases, and displays their concentrations. Once the risk occurs, it also raises the alarm (visual, audible and vibrative). By adopting interchangeable smart sensor module, it can be made for detecting 5 gases and 6 gases.

Features:

• Interchangeable smart sensor module
• Intrinsically safe
• MOS, catalytic, electrochemical, infrared, PID sensors selectable
• Built-in sampling pump (optional)
• Visual, audible and vibrative alarm
• Adjustable alarm levels and span calibration value
• STEL and TWA alarm for toxic gases
• Password management
• Real-time clock
• Self-test after power on
• Self-diagonstic and self-correction function
• GPS, GPRS and man down function (optional)

Specifications:

BLACKLINE DEVICE, G7C CELLULAR G7 DIFFUSION MULTI-GAS CARTRIDGE H2S,LEL-I, CO, O2 EU

Blackline’s G7 offers an exclusive modular design with field-replaceable gas sensor cartridges and delivers industry-leading customization to accommodate nearly every need. With G7’s cartridges, gas detection and lone worker monitoring are tailored to every industry, scenario and application. G7 provides three cartridge options to support gas detection, lone workers and evacuation management. The selection of gas sensors in each cartridge can be customized and configured for specific work environments.

Each cartridge features Blackline’s exclusive green SureSafe® light — when the light is on, workers can be confident knowing that they are connected to the Blackline Safety Network and that their safety is being monitored.

Field-replaceable for maximized uptime

Cartridges can be easily and quickly changed out in the field with new, pre-calibrated replacements once sensors reach the end of their operating life. Device uptime is maximized and maintenance time is minimized, ultimately saving businesses money.

G7’s modular interface allows the device to be converted on-site from a single to a quad-gas monitor in seconds. G7 combines the efficiency of a disposable gas detector with the innovation of a connected safety monitor — its modular design reduces the total number of devices needed, as one G7 can function as both a single and a quad-gas monitor, effectively reducing overall costs. When a sensor reaches the end of its serviceable life or gets damaged, the cartridge can simply be switched out for a new one. No more costly repairs or extended product downtimes.

Quad-gas Cartridge

G7 with a Quad-gas cartridge operates as a gas detector and lone worker safety device, delivering comprehensive gas detection coverage of up to four gases. Sensor combinations are customizable in order to tailor gas detection to complex, hazardous working environments.

Sensors

G7 devices with Single-gas or Quad-gas cartridges are compatible with a variety of gas sensors. Blackline currently offers gas sensors to detect hydrogen sulfide (H­2S), explosive gases (LEL), carbon monoxide (CO) and oxygen (O2).

In development: Sulfur dioxide (SO2), hydrogen resistant carbon monoxide (CO-H) and ammonia (NH3)

The G7 Quad-gas Cartridge features four sensor positions, each with a range of sensor options. Each sensor is provided a one-character designation that helps to select the correct part number.

COMBUSTIBLE GAS SENSOR

• Lower explosive limit (LEL) — Infrared: I
• Lower explosive limit (LEL) — pellistor: P
• None: X

OXYGEN SENSOR

• Oxygen (O2): O
• None: X

TOXIC GAS SENSOR ONE

• Ammonia (NH3): A
• Dual-toxic (H2S/CO) — available July, 2018: D
• Hydrogen sulfide (H2S): H
• Chlorine (Cl2): L
• Carbon monoxide (CO): M
• Hydrogen-resistant CO (CO-H): R
• Sulfur Dioxide (SO2): S
• None: X

TOXIC GAS SENSOR TWO

• Ammonia (NH3): A
• Carbon dioxide (CO2): C
• Hydrogen sulfide (H2S): H
• Chlorine (Cl2): L
• Carbon monoxide (CO): M
• Hydrogen-resistant CO (CO-H): R
• Sulfur Dioxide (SO2): S
• Volatile organic compounds (VOC) — photo-ionization detector: V
• None: X

OVERVIEW

Selecting G7 gas sensor options is an easy four-step process.

1. Select an oxygen sensor if required
2. Select your preferred combustible gas sensor
3. In Toxic Gas Sensor 1 position, starting at the top of the table, select the first toxic gas that you require (or dual-toxic sensor)
4. Choose your last toxic gas option for the Toxic Gas Sensor 2 position

Gas detection as a service

Blackline offers cartridge replacements as a service plan with new cartridges shipped to locations.

Simple maintenance

With G7’s modular design, sensor maintenance is uniquely simple. Bump tests and calibrations are performed using cal-caps or Blackline’s G7 Dock in-house, at your facility. All test data is communicated back to Blackline Live from the device — wirelessly and in real-time — for compliance tracking and reporting. With G7, never waste time downloading calibration logs again.

Servicing gas sensors and wasting money on sensor maintenance is a thing of the past. When a G7 gas sensor reaches the end of its serviceable life, simply switch the cartridge out for a new one on the spot without taking the device out of service.

Blackline Safety©

With a range of personnel monitoring devices, Blackline Safety©is committed to keeping your staff accountable and safe. These devices double as gas detectors, too!

Blackline Safety© provides live-monitoring and wireless gas detection, it helps teams working in hazardous environments respond to emergencies in real-time and manage efficient evacuations, accounting for everyone’s safety along the way.

BLACKLINE DEVICE G7C CELLULAR, G7 PUMPED MULTI-GAS CARTRIDGE, H2S, LEL-I, CO, O2, EU

Blackline’s G7 offers an exclusive modular design with field-replaceable gas sensor cartridges and delivers industry-leading customization to accommodate nearly every need. With G7’s cartridges, gas detection and lone worker monitoring are tailored to every industry, scenario and application. G7 provides three cartridge options to support gas detection, lone workers and evacuation management. The selection of gas sensors in each cartridge can be customized and configured for specific work environments.

Each cartridge features Blackline’s exclusive green SureSafe® light — when the light is on, workers can be confident knowing that they are connected to the Blackline Safety Network and that their safety is being monitored.

Field-replaceable for maximized uptime

Cartridges can be easily and quickly changed out in the field with new, pre-calibrated replacements once sensors reach the end of their operating life. Device uptime is maximized and maintenance time is minimized, ultimately saving businesses money.

G7’s modular interface allows the device to be converted on-site from a single to a quad-gas monitor in seconds. G7 combines the efficiency of a disposable gas detector with the innovation of a connected safety monitor — its modular design reduces the total number of devices needed, as one G7 can function as both a single and a quad-gas monitor, effectively reducing overall costs. When a sensor reaches the end of its serviceable life or gets damaged, the cartridge can simply be switched out for a new one. No more costly repairs or extended product downtimes.

Quad-gas Cartridge

G7 with a Quad-gas cartridge operates as a gas detector and lone worker safety device, delivering comprehensive gas detection coverage of up to four gases. Sensor combinations are customizable in order to tailor gas detection to complex, hazardous working environments.

Sensors

G7 devices with Single-gas or Quad-gas cartridges are compatible with a variety of gas sensors. Blackline currently offers gas sensors to detect hydrogen sulfide (H­2S), explosive gases (LEL), carbon monoxide (CO) and oxygen (O2).

In development: Sulfur dioxide (SO2), hydrogen resistant carbon monoxide (CO-H) and ammonia (NH3)

The G7 Quad-gas Cartridge features four sensor positions, each with a range of sensor options. Each sensor is provided a one-character designation that helps to select the correct part number.

COMBUSTIBLE GAS SENSOR

• Lower explosive limit (LEL) — Infrared: I
• Lower explosive limit (LEL) — pellistor: P
• None: X

OXYGEN SENSOR

• Oxygen (O2): O
• None: X

TOXIC GAS SENSOR ONE

• Ammonia (NH3): A
• Dual-toxic (H2S/CO) — available July, 2018: D
• Hydrogen sulfide (H2S): H
• Chlorine (Cl2): L
• Carbon monoxide (CO): M
• Hydrogen-resistant CO (CO-H): R
• Sulfur Dioxide (SO2): S
• None: X

TOXIC GAS SENSOR TWO

• Ammonia (NH3): A
• Carbon dioxide (CO2): C
• Hydrogen sulfide (H2S): H
• Chlorine (Cl2): L
• Carbon monoxide (CO): M
• Hydrogen-resistant CO (CO-H): R
• Sulfur Dioxide (SO2): S
• Volatile organic compounds (VOC) — photo-ionization detector: V
• None: X

OVERVIEW

Selecting G7 gas sensor options is an easy four-step process.

1. Select an oxygen sensor if required
2. Select your preferred combustible gas sensor
3. In Toxic Gas Sensor 1 position, starting at the top of the table, select the first toxic gas that you require (or dual-toxic sensor)
4. Choose your last toxic gas option for the Toxic Gas Sensor 2 position

Gas detection as a service

Blackline offers cartridge replacements as a service plan with new cartridges shipped to locations.

Simple maintenance

With G7’s modular design, sensor maintenance is uniquely simple. Bump tests and calibrations are performed using cal-caps or Blackline’s G7 Dock in-house, at your facility. All test data is communicated back to Blackline Live from the device — wirelessly and in real-time — for compliance tracking and reporting. With G7, never waste time downloading calibration logs again.

Servicing gas sensors and wasting money on sensor maintenance is a thing of the past. When a G7 gas sensor reaches the end of its serviceable life, simply switch the cartridge out for a new one on the spot without taking the device out of service.

Blackline Safety©

With a range of personnel monitoring devices, Blackline Safety©is committed to keeping your staff accountable and safe. These devices double as gas detectors, too!

Blackline Safety© provides live-monitoring and wireless gas detection, it helps teams working in hazardous environments respond to emergencies in real-time and manage efficient evacuations, accounting for everyone’s safety along the way.

CROWCON GAS-PRO PUMPED WITH FLOW PLATE, CHARGER CRADLE WITH POWER WITH CO/H2S/CO2/LEL/O2 SENSOR

Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user-focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User Friendly

• Top mount display – makes it easy to read at a glance
• Simple single button operation – reduces training time
• Intuitive functionality – can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options – offers multiple uses within one compact detector
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail-safe flow plate recognition – takes away the pain of pre-entry testing
• Specific and unique Pre-Entry Check (PEC) mode

Reliable

• Reliable lithium-ion battery – provides over 14 hr use from a 7.5 hr charge
• Water and dust resistant to IP65 and IP67 – capable of withstanding harsh environments
• Bump and calibration reminders – Full compliance

Specifications

Gases and Ranges

About CROWCON

Crowcon provides gas detectors to fit your needs. Portable or fixed, Single or Multigas, Crowcon detectors will warn you of gaseous hazards before it's too late. Protecting people and the environment from gas hazards.

CROWCON GAS-PRO 4 GAS CO/H2S/O2/CH4 PUMPED WITH FP PSU CRADLE ENG

Gas-Pro is a confined space entry monitoring solution for workers and fleet managers, and is now supported by the I-Test bump test and calibration station.

Offering detection of up to 5 gases in a compact and rugged solution, Gas-Pro has an easy-to-read top mount display combining ease of use and user-focused features.

An optional internal pump, activated with the flow plate, takes the pain out of pre-entry testing and allows Gas-Pro to be worn either in pumped or diffusion modes.

User Friendly

• Top mount display – makes it easy to read at a glance
• Simple single button operation – reduces training time
• Intuitive functionality – can be used whilst wearing gloves

Adaptable

• Monitor 5 gases from many different options – offers multiple uses within one compact detector
• Pumped and diffusion solutions
• Multiple languages
• Automatic fail-safe flow plate recognition – takes away the pain of pre-entry testing
• Specific and unique Pre-Entry Check (PEC) mode

Reliable

• Reliable lithium-ion battery – provides over 14 hr use from a 7.5 hr charge
• Water and dust resistant to IP65 and IP67 – capable of withstanding harsh environments
• Bump and calibration reminders – Full compliance

Specifications

Gases and Ranges

About CROWCON

Crowcon provides gas detectors to fit your needs. Portable or fixed, Single or Multigas, Crowcon detectors will warn you of gaseous hazards before it's too late. Protecting people and the environment from gas hazards.

Blackline G7 Exo, Cellular, Diffusion Multi-Gas Module, H2S, Lel-I, Co, O2, North America, 3 Year System Access Term

CHANGING THE GAME, AGAIN.

Blackline’s portfolio of G7 solutions empowers teams to monitor their environments for hazards and respond instantly should something happen. Our systems incorporate state-of-the-art technology to address the shortcomings of other solutions on the market. We’ve already changed the face of gas detection and safety wearables, and now we’ve set our sights on disrupting another market — area monitoring. Meet G7 EXO — the world’s first cloud-connected area monitor with integrated 2G/3G/4G communications. When G7 EXO is turned on, it automatically connects directly to the Blackline Safety Cloud, streaming critical insights of your site or facility. Turn-key connectivity, intelligence and versatility are hallmarks of every G7 solution. With G7 EXO, you gain control over your projects and make the ultimate difference for your business, no matter the scenario playing out before you.

NEXT-GEN AREA MONITORING.

Area monitoring has never been simpler yet more considerate of your needs. G7 EXO leverages industryleading cellular and satellite connectivity to empower comprehensive, robust area monitoring, without any of the hassle associated with other systems. No need for clumsy RFID tags or manual networks to connect personnel to an area monitor — G7 EXO does this automatically and intelligently. With auto-generated, intelligent zones, G7 EXO works alongside employees equipped with G7 wearable monitors for maximum visibility into the safety and productivity status of a facility. Both systems continuously stream location and gas reading data to the Blackline Safety Cloud, providing a full situational overview of a business’ workforce and facility.

CLOUD-CONNECTED INSIGHTS.

G7 EXO solves the challenges of continuous toxic and combustible gas monitoring for sites, facilities and fence lines. Automating long-term area monitoring and connected safety for unmatched efficiency, G7 EXO allows teams to focus on their work at hand. Leveraging integrated cellular and satellite connectivity, G7 EXO can be placed anywhere and automatically communicates environmental data to our Blackline Live safety platform — making manual data collection a thing of the past. The integrated connectivity capability is comprehensive, never limited by the number of devices in an area or on a mesh network. All you have to do is turn it on.

• 100+ day battery life
• Diffusion and combination diffusion / pump models
• Internal 2G/3G/4G wireless works in 100+ countries
• Works globally with optional Iridium satellite communication
• Call for help using the SOS latch
• Simultaneously monitors up to five gases
• Over 20 available gas sensor options
• Works seamlessly with Blackline Live cloud-hosted software
• Communicates data to the Blackline Safety Cloud — no need to collect data from the field
• Blackline Live automates configuration changes, plus firmware updates
• Blackline Analytics automates compliance reporting
• Internal GPS and beacon location technology
• Manage G7 EXO area monitors in Blackline Live alongside G7c personal monitors

DROP-AND-GO DEPLOYMENT.

No more questions, just simple placement and hassle-free execution. On startup, or manually from the main menu, EXO communicates the status if its cellular or satellite connectivity, GPS/beacon signal and placement status. With a large, full-color screen, G7 EXO clearly displays all the information users need to know on its full-color screen. If the set-up isn’t quite right, EXO will let you know to simply run the set-up wizard. Auto-generated zones empower out-of-the-box, seamless communication and monitoring of personnel in a specified area. EXO-generated zones automatically work with nearby personnel, notifying them of potential hazards. No need to tag in and out or join multiple teams.

DESIGNED FOR YOUR ENVIRONMENT.

Until now, conventional area monitors have suffered short battery life, limited configurability and complicated or inadequate connectivity. Designed in response to these shortcomings and with customer feedback in mind, G7 EXO features industry-leading run times and functionality, supported by the Blackline Safety Cloud for simple deployment and worry-free operation. With an aluminum body and exclusive, full-color interface, G7 EXO is designed to withstand the harshest conditions while still being easy to use. A loud alarm and series of lights communicate events with personnel in its vicinity, while simultaneously communicating the alert through the Blackline Safety Cloud to other EXO and person-worn G7 devices throughout your facility. G7 EXO leverages the same plug-and-play gas sensor cartridges as the rest of our G7 portfolio. Should a sensor fail or reach the end of its serviceable life, simply pop it out and replace it with a new one — eliminating device downtime.

CONNECTED WORKPLACE.

Featuring two output ports, G7 EXO can be configured to send signals to other equipment on your site. Should gas levels reach a high threshold you can activate external sirens, open or close gates in the event of an emergency, or flash lights and sound a siren to alert personnel within a zone. During an emergency, G7 EXO also leverages relays to communicate to other areas of your site, empowering real-time awareness and visibility of an incident. EXO connects your teammates through the use of zone alarms, automatically alerting other devices in its zone. Need to make changes on the fly? No problem, change or update EXO’s configuration over the air in seconds. G7 EXO delivers never-before-seen area monitoring control in a rugged, easy to use and deploy system.

READY-TO-USE DEPLOYMENT KITS.

Specifications