Phocheck Tiger Li-Ion Battery - H&S / Ppm / Data Logging

• Dynamic range ppb to 20,000 ppm for specific volatiles
• Pre-programmed time-weight average (TWA) and short-term exposure limits (STEL) for up to 450 gases
• Accuracy to ±5% display reading ± one digit
• Intrinsically Safe ATEX, IECEx and CUL approvals
• Easy change miniPID detector, electrode stack and lights
• LED, vibratory, and audible alarms
• Logs >120,000 data points including date and time stamp, 33 hours at one log per minute
• Battery life up to 30 hours — Certified to be changed within hazardous areas

Specifications

Tvoc Fixed Pid Detector With Atex Approval

Volatile organic compounds (COV) are substances with a huge volatility. This means that they release vapors even at ambient pressure and temperature and thus easily spread gaseously in the air. In contact with heat, VOC can feature high risks of explosion or ignition.

The TVOC is a VOC detector with photoionization using a 10.6 eV PID lamp. Featuring measure display and 4-20 mA analog output, the TVOC PID detector can be easily installed on any system with these signals. Thanks to its ATEX approval, this fixed gas detector can be used in category 2 hazardous areas without safety barrier.

TVOC PID detector assets

• 6 eV lamp for VOCs with IP power < 10,6 eV
• Measuring range: 0 to 10 pm - 0 to 100 ppm or 0 to 1 000 ppm on only one device
• Humidity resistant without compensation
• Accurate results under any atmospheric condition
• Rugged and solid design for better resistance to harshest environments
• Large LCD display for clear readouts
• Easy to use – minimum training required

  TVOC COV detector fields of application

  • Refineries and petrochemistry, offshore platforms
  • Solvents recovery system
  • Wastewater treatment
  • Pulp and paper
  • Pharmaceutical products
  • Indoor air quality monitoring
  • Industrial painting, printing inks and ground coating

Specifications

10.6Ev Krypton Lamp (Individual)

The PID 10.6 eV lamp is an internal element to the Ion Science PID sensor and is specifically designed for use only within Ion Science PID instruments. Used in the Cub Series, Tiger Series and Corvus Instruments PID monitors.

Calcheck Helium

A-21500 ION Science Cal Check Helium Leak Rate Calibration
CalCheck provides simple, fast and dependable self-calibration in cc/sec leak rates of Ion Science leak detectors ensuring on-going accuracy and confidence in your instruments.
Gas leak detectors use standard calibrated leak (SCL) fittings for easy and reliable calibration. Standard systems give leaks of 5 x 10-4 cc/sec, but can be lowered to 5 x 10-8 cc/sec using lower concentration gas cylinders.

This accessory is compatible with GasCheck G, GasCheck Tesla, GasCheck 3000is and GasCheck 5000is leak detector instruments.

Pid Lamp Cleaning Kit

PID lamp cleaning kit This conveniently packaged PID lamp cleaning kit is available for cleaning the lamp within the PID sensor to remove dirt, grease, and grime from your lamp window ensuring optimal performance of your instrument. This accessory is compatible for use with all Ion Science 10.0eV and 10.6eV PID lamps. It should not be used with the 11.7eV lamp. Contact us to place an order quoting the part number below. Part number: A-31063

Calibration Tool Kit

A-849214 ION Science TVOC PID Zeroing Tool Kit

This TVOC PID Zeroing Tool Kit contains components and tools required for general service and calibration. The kit includes a facility to carry out the Zero stage of the calibration however SPAN gas P/N 116ES-248-100 must be purchased separately.

Flexible Probe Assembly

The Flexible Probe Assembly is used for difficult to reach areas. Replaces the standard probe, internal material is PTFE.

Ptfe White Filter Discs (Pack Of 10)

A-861472 ION Science Tiger Series PTFE White Filter Discs (Pack of 10)
These PTFE filters are hydrophobic; they allow gas to pass but block water. These filters protect instruments by filtering airborne debris and water ingress.

These filters are a consumable part and should be replaced on a regular basis.

Ion Science 11.7 Ev Lamp

11.7 eV lamp The 11.7 eV lamp is an internal element to the Ion Science PID sensor and is specifically designed for use only within Ion Science PID instruments. This consumable part is available for purchase from Ion Science. Please contact us directly for more information and to place an order, quoting the part number below. Ion Science also offers a 10.6 eV lamp variant. 11.7 eV lamp part number LA4SM700