Safety Helmet (Hard Hats)

North Hard Hats - A119R

Full brim HDPE shell with accessory slots. Protects from the sun’s UV rays, rain and falling debris. 4-point or 6-point nylon suspension with 2 level height adjustment. A49: Meets ANSI Z89.1-2009 and CSA Z94.1-2005 Type 1 Class E. A119R: Meets ANSI Z89.1-2009 and CSA Z94.1 Type 2 Class E

Key Features

Specific Features:

• Hat style helps protect against splash, glare and sun exposure, and features a permanent under-brim glare guard.
• Your choice of either the self-sizing 4-point pinlock suspension (RS4PC) or 4-point dielectric, Flex-Gear® ratchet suspension (RS4RC). The upgraded suspension system provides a more comfortable, secure fit.
• Pinlock suspension – Incremental sizing of 1/16" hat size (5mm) makes a secure fit easy.
• Ratchet suspension – Ratchet suspensions can be adjusted between hat sizes 6 1/2" - 8".
• Pinlock and Ratchet suspensions have vertical adjustment capability (two in front, two in rear) for a secure fit to different head sizes.
• Wide (3/4") crown straps provide more comfort and helps the suspension system absorb energy. The round, wide crown area also allows for good ventilation.
• Replaceable cotton brow pad is pillowed for maximum comfort. Velcro replacement brow pads are available in absorbent cotton, a cooling material, or a vinyl material.
• Pad print capability in up to eight different locations on the hat – logos may have up to six colors per location.  (Additional fees applicable)
• Two-year warranty. Bullard reputation can be seen in the attention to detail on comfort and fit.
• Distinctive Three-Rib trademark.
• Made in the USA.

General
Weight (with suspension): 13 oz. (370g)
ANSI/ISEA Classification: Z89.1-2014, Type I, Class E and G
Identifying Marks: Three Ribs
Warning Labels: Yes
Decorating Capability: Yes
Instructions with Unit: Yes
# of Standard Colors: 20

Outer Shell
Material: High Density Polyethylene (HDPE)
Style: Full Brim – Hat Style
Accessory Slots: No
Chin Strap Attachment: 2 Versions: Elastic (ES42) and Quick Release Nylon (R50)
Rain Trough: No
Dimensions: Width – 10.5" (266.7 mm)
Length – 12.75" (323.85 mm)
Height – 6" (152.4 mm)

North K2 Hard Hat - A29R01

A versatile shell design in HDPE featuring strength and rigidity in a lightweight hard hat. Accessory slots and 4-point nylon web suspension with forehead comfort band and crown pad. Short peak version (A29SPR) allows increased overhead vision. Meets ANSI Z89.1-2009 Type 1 Class E.

Recommended Industries/Use

• Chemical, Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

• Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009.
• Regulation - Type 1, Class E.

Specifications

North K2 Short Peak Hard Hat - A29SPR030000

A versatile shell design in HDPE featuring strength and rigidity in a lightweight hard hat. Accessory slots and 4-point nylon web suspension with forehead comfort band and crown pad. Short peak version (A29SPR) allows increased overhead vision. Meets ANSI Z89.1-2009 Type 1 Class E.

Recommended Industries/Use

• Chemical, Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

• Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009.
• Regulation - Type 1, Class E.

Specifications

North Peak-Hard Hat With Rain Trough - A69010000

A versatile shell design in HDPE featuring strength and rigidity in a lightweight hard hat. Accessory slots and 4-point nylon web suspension with forehead comfort band and crown pad. Short peak version (A29SPR) allows increased overhead vision. Meets ANSI Z89.1-2009 Type 1 Class E.

Recommended Industries/Use

• Chemical, Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

• Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009.
• Regulation - Type 1, Class E.

Specifications

North Peak-Hard Hat With Rain Trough - A69R010000

A versatile and dependable design, with grooved HDPE outer shell, rain trough and accessory slots. Choice of 6-point, nylon web or plastic suspension. Pin lock or ratchet size adjustment with 3-level height adjustment. Meets ANSI Z89.1-2009 and CSA Z94.1-2005 Type 1 Class E

Recommended Industries/Use

• Chemical, Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

• Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009.
• Regulation - Type 1, Class E.

Specifications

North Peak Hard - A79R

Recommended Industries/Use

Chemical, Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009 and CSA Z94.1-2005.
• Regulation - Type 1, Class E.

Specifications

North Hard Hats - A89

All purpose lateral impact HDPE hard hat with foam liner. Rain trough and accessory slots. 4-point nylon ratchet or quick fit suspension with 3-level height adjustment. Meets ANSI Z89.1-2009 and CSA Z94.1-2005 Type 2 Class E.

Recommended Industries

Chemical ,Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009 and CSA Z94.1-2005.
• Regulation - Type 2, Class E.

Specifications

North Hard Hats - A89R

All purpose lateral impact HDPE hard hat with foam liner. Rain trough and accessory slots. 4-point nylon ratchet or quick fit suspension with 3-level height adjustment. Meets ANSI Z89.1-2009 and CSA Z94.1-2005 Type 2 Class E.

Recommended Industries

Chemical ,Construction, Food Services, Forestry, Government, Manufacturing, Mining, Municipal Services, Oil and Gas, Steel and Metals, Transportation, Utilities, Welding and Wind Energy.

Hazards

Abrasion, Extreme Environment and Impact.

Regulations

• Regulation - ANSI Z89.1-2009 and CSA Z94.1-2005.
• Regulation - Type 2, Class E.

Specifications

Workgard® Safety Helmet - 100BL

• HDPE outer shell with rain trough for water disbursement.
• Contoured at both sides to accommodate hearing protection.
• 30mm accessory slot designed to be compatible with a wide range of face shields and hearing products.
• 6-point suspension with 2-level height adjustment for a good fit.
• Easy-to-fit adjustment system of interlocking teeth for firm hold; slide to tighten.
• Fits a wide range of head sizes up to 62cm (head circumference)
• Comes with a highly absorbent sweat band.
• Complies with EN397:1995 and SS98:2005 (TÜV SÜD PSB-tested)

Workgard® Safety Helmet - 100BL without inner liner

• HDPE outer shell with rain trough for water disbursement.
• Contoured at both sides to accommodate hearing protection.
• 30mm accessory slot designed to be compatible with a wide range of face shields and hearing products.
• 6-point suspension with 2-level height adjustment for a good fit.
• Easy-to-fit adjustment system of interlocking teeth for firm hold; slide to tighten.
• Fits a wide range of head sizes up to 62cm (head circumference)
• Comes with a highly absorbent sweat band.
• Complies with EN397:1995 and SS98:2005 (TÜV SÜD PSB-tested)

Workgard® Safety Helmet - 100RD

•  HDPE outer shell with rain trough for water disbursement.
• Contoured at both sides to accommodate hearing protection.
• 30mm accessory slot designed to be compatible with a wide range of face shields and hearing products.
• 6-point suspension with 2-level height adjustment for a good fit.
• Easy-to-fit adjustment system of interlocking teeth for firm hold; slide to tighten.
• Fits a wide range of head sizes up to 62cm (head circumference)
• Comes with a highly absorbent sweat band.
• Complies with EN397:1995 and SS98:2005 (TÜV SÜD PSB-tested)

Workgard® Safety Helmet - 100WH

•  HDPE outer shell with rain trough for water disbursement.
• Contoured at both sides to accommodate hearing protection.
• 30mm accessory slot designed to be compatible with a wide range of face shields and hearing products.
• 6-point suspension with 2-level height adjustment for a good fit.
• Easy-to-fit adjustment system of interlocking teeth for firm hold; slide to tighten.
• Fits a wide range of head sizes up to 62cm (head circumference)
• Comes with a highly absorbent sweat band.
• Complies with EN397:1995 and SS98:2005 (TÜV SÜD PSB-tested)

WORKGard SAFETY HELMET, COLOUR: WHITE WITHOUT INNER LINER

Workgard® Safety Helmet - 100Y

• HDPE outer shell with rain trough for water disbursement.
• Contoured at both sides to accommodate hearing protection.
• 30mm accessory slot designed to be compatible with a wide range of face shields and hearing products.
• 6-point suspension with 2-level height adjustment for a good fit.
• Easy-to-fit adjustment system of interlocking teeth for firm hold; slide to tighten.
• Fits a wide range of head sizes up to 62cm (head circumference)
• Comes with a highly absorbent sweat band.
• Complies with EN397:1995 and SS98:2005 (TÜV SÜD PSB-tested)

Bullard AP-4PT Ratchet, Cotton Brow Pad, Standard Series Cap Style, White

The Bullard Standard low profile slotted hard hat with 4 pt ratchet suspension is designed to provide the ideal hard hat for construction and everyday work environments that allows comfort. Features slots usable to attach accessories such as earmuffs and face protection with a low profile, shell design allowing working comfort; Flex-Gear ratchet system including easy twist knob, 3/4" wide woven nylon crown straps for comfort that help suspension system absorb energy while allowing ventilation and vertical adjustments with 4 points of attachment that are adjustable in the rear and front. Bullard Standard vented low profile slotted hard hat with 4 pt ratchet suspension is made in the USA and comes with a pillowed comfort replacement cotton brow pad and adjustable in headband sizes from 6 1/2" - 8" while weighing 12oz with suspension. Meets ANSI/ISEA classification Z89.1-2014, Type I, Class E and G for jobs with protective helmet requirements.

Features

• White safety hard hat designed to provide the ideal hard hat for construction and everyday work environments that allows comfort.
• Features slots usable to attach accessories such as earmuffs and face protection with a low profile, shell design allowing working comfort.
• Flex-Gear ratchet system with easy twist knob, 3/4" wide woven nylon crown straps for comfort and vertical adjustments with 4 points of attachment adjustable in the rear and front.
• Made in the USA and comes with a pillowed comfort replacement cotton brow pad and adjustable in headband sizes from 6 1/2" - 8" while weighing 12oz with suspension.
• Meets ANSI/ISEA classification Z89.1-2014, Type I, Class E and G for jobs with protective helmet requirements.

Specifications

Bullard Safety Helmets

A safety company founded in 1898, Bullard continues to bring its pioneering spirit into the 21st century. This company has refined protective headgear for over a century.

Bump Cap White Colour LD-S903

• Light weight working cap for general workplace
• HDPE cap material
• Approved to CE EN 812:1997
• Available Color : Blue, Yellow, White

specifications

MSA V-Gard Helmet With Ratchet Sup, White (PSB)

MSA V-Gard hard hat known for comfort, quality and durability.

The MSA V-Gard Helmet, with its distinctive trademark “V” design, is a world recognized brand known for comfort, quality, and durability. MSA has sold well over 100 million V-Gard Helmets since its introduction – so many in fact, that the iconic “V” design has been a mainstay for many years on even the toughest worksites. When you want the best comfort, quality and durability worn by millions across the globe, you need to buy the original MSA V-Gard Helmet, settle for nothing less.

Features and Benefits

• World recognized and trusted hard hat.
• Available in both front brim (cap style) and full brim configurations.
• Fas-Trac III ratchet suspension (4 pt) provides unsurpassed comfort.
• Meets ANSI/ISEA Z89.1-2009 (Class E) and CSA Z94.1-2005 (Class E).
• Fas-Trac III suspension.
• Polyethylene shell provides superior impact protection.
• Self-adjusting Crown straps ensure a comfortable fit.

Specifications