Vertic Fixing Ring For Altifix Post - PEX.AFX

Features

• Complies to the standard NF EN 795 Class A1.
• Meets or exceeds all applicable industry standards.
• including OSHA, ANSI and CSA.
• The structure that this product is attached to must be capable of supporting a 5,000 lbs (22.2 kN) static load or provide a 2:1 safety factor in the direction of pull.

Advantages

• Can be used as : single anchorage point.
• Can be installed on all the VERTIC supports, or on concrete or steel structures.
• Corrosion resistant.
• Any length of bolt can be used for mounting, thanks to the chamfered mounting hole.

Compatibility

• Compatible with the whole ALTIFIX range and all the VERTIC brackets.
• Installing with M12 bolt.

Specifications

VERTIC SIMPE FIXING KIT ON BEAM 80 TO 150MM, HEIGHT MAX 400MM

VERTIC UPPER AND LOWER SUPPORT FOR LADDER & MAST 27 TO 42MM (GALVANISED STEEL)

Vertic Travelling, Locking Carriage With Karabiner - CMB

• The CMB carriage allows going through the intermediate supports at a distance.The carriage ensures a unidirectional blocking.
• The connection of the carriage can be done at any point on the cable.
• Certified EN 353-2 without textile shockabsorber.
• Automatic engagement on the cable at the bottom part without removing the karabiner.

Vertic Vertical Lower End Runner - EVB3

Pretensions the cable and enables rapid attachment of the carriage at the bottom of the system.

VERTIC TABULAR MAST FIXING 60 TO 140MM (GALVANISED STEEL)

Vertic Lifeline Energy Shock Absorber - ABS55

• Installed at end of the lifeline.
• It reduces the loads applied to the structure.

Vertic Altifix For Pvc Sealing - AFX-PVC

• The lifeline support ALTIFIX (ref AFX-PVC) mounts directly on the PVC waterproofing.
• The same support can be used as intermediate or extremity post.
• Location is possible independent of the framework.
• A central fixation liaises with the support of the roofing.
• Installed without access to the uder surface.
• Made from stainless steel.

VERTIC ASSEMBLY UNIT WITH COUNTERWEIGHT WITH HOLES FOR TO

VERTIC SET INCLUDING STRAIGHT UPRIGHT + COUNTERWEIGHT + FIXING FOR TOP AND MIDDLE RAILS

Vertic Assembly Unit With Counterweight - Version Pince - AL-A.ELVP

VERTIC FREE-STANDING ASSEMBLY UNIT WITH COUNTER WEIGHT

Vertic Corner Tube Curved At 90° For Toprail And Middlerail (Both Extremities Include The Joint Bars) - AL-ANG90

Vertic End Plug For Top Middle Rails - AL-BOUCH

• Discret ribbed plug for a perfect safety of the ends of top and middle rails.

Vertic Articulated Corner Coupling - AL-EAA

• Allows making corners from 70° to 180°
• Easily adjustable on site.
• Diametre and material are identical to the rail for an aesthetic continuity.

Vertic Wall Extremity - AL-EXTM

• Enables the mounting of rails on any wall.
• Fixed directly on the wall with 2 fixings.
• Diameter 10 mm maxi (not included).

Vertic Tube For Top And Middle Rail - AL-LISSE

• In 36mm extruded aluminium.
• Supplied in 3m length, reduced at one end.

Vertic Aluminum Plinth - AL-PAL

The railing must be fixed with a plinth if the parapet measures less than 100 mm (roofs) or 150 mm (machines) in relation to the circulation area. End plugs and corners available.

VERTIC FIXING FOR AFX-PVC

VERTIC CHEMICAL BOLT

VERTIC ANGLE PIECE FOR POST

Vertic Horizontal Lifeline

HIGH ADAPTABILITY
Free movement in all directions
LONG-LASTING LIFESPAN
Entirely made of stainless steel
USER PRODUCTIVITY
Free movement all along the wire rope without unclipping
USER-FRIENDLY
Its engineered carriage can be connected anywhere all along the wire rope
OPTIMUM SAFETY
Equipped with tension control and fall indicators
SUPERIOR DESIGN
Superior design and finish allow a perfect integration whatever architectural constraints

VERTIC HORIZONTAL LIFELINE "ALTILINE" L. 12M

Altiline is the ideal lifeline when the operator is working at some distance from the device. It allows a continuous movement without restriction nor unhooking while going throw intermediate brackets. The specific runner allows the operator to connect at any point of the cable and move without restriction. The design of the lifeline and the finish give perfect integration with the various architectural constraints. 

The system allows various possible routes, owing to the flexibility of the cable and the rigid intermediate supports and brackets that guide the cable over its entire route. Built-in tension and fall indicators. Resistance to corrosion to the use of stainless steel components.

VERTIC HORIZONTAL LIFELINE "ALTILINE" L. 50M

Altiline is the ideal lifeline when the operator is working at some distance from the device. It allows a continuous movement without restriction nor unhooking while going throw intermediate brackets. The specific runner allows the operator to connect at any point of the cable and move without restriction. The design of the lifeline and the finish give perfect integration with the various architectural constraints. 

The system allows various possible routes, owing to the flexibility of the cable and the rigid intermediate supports and brackets that guide the cable over its entire route. Built-in tension and fall indicators. Resistance to corrosion to the use of stainless steel components.

VERTIC HORIZONTAL LIFELINE "ALTILINE" L. 53M

Altiline is the ideal lifeline when the operator is working at some distance from the device. It allows a continuous movement without restriction nor unhooking while going throw intermediate brackets. The specific runner allows the operator to connect at any point of the cable and move without restriction. The design of the lifeline and the finish give perfect integration with the various architectural constraints. 

The system allows various possible routes, owing to the flexibility of the cable and the rigid intermediate supports and brackets that guide the cable over its entire route. Built-in tension and fall indicators. Resistance to corrosion to the use of stainless steel components.

Vertic Reversible, Travelling, Locking Carriage With Karabiner - CMBR

Since all configurations are not exclusively horizontal or vertical,VERTIC has patented an anti-fall system that can be used from 0° to 180.

Vertic Single Moving Carriage - CMS3

• The VERTIC moving carriage permits uninterrupted movement of the operator at any distance from the life line.
• Has a large diameter hooking eyelet, allowing the use of any type of connector.

Vertic Carriage With Roller Bearing Kit - CMS3-KR

For heavy loads, a roller kit can be added to the carriage. Facilitates the move when using a self-retractible block, or a long lanyard.

Vertic Removable Ci8 Cable-Locking End Piece - ESC8

Permits curves and direction changes. Available in removable or crimped versions.

Vertic Vertical Upper End (With Electro Hydraulic Crimping) - EVH2

Crimped upper part. Its elastomer component contributes to energy absorption.

VERTIC GUARDRAIL FREE-STANDING ALTILISSE

The most used fall protection system for highly trafficked areas are guardrails. 

Designed as a protection barrier, they allow safe access to a specific point, protect users against hazards when working at height and mark danger areas. 

No need to drill or penetrate the roof

VERTIC GUARD RAIL FREE-STANDING – FOLDABLE

The most used fall protection system for highly trafficked areas are guardrails. 

Designed as a protection barrier, they allow safe access to a specific point, protect users against hazards when working at height and mark danger areas. 

No need to drill or penetrate the roof

Foldable with 1 person

VERTIC GUARDRAIL ON PARAPET Components : 

• Extruded aluminium upright 
• Interface for isolated parapet 
• Side mounting plate 
• Vertical mounting plate 
• Offset mounting plate 
• Wall-mounting part 
• Aluminium plinth 
• Bent corner 
• Articulated corner coupling 
• Top and middle rail

VERTIC GUARDRAIL ON PARAPET - foldable : 

• Extruded aluminium upright 
• Interface for isolated parapet 
• Side mounting plate 
• Vertical mounting plate 
• Offset mounting plate 
• Wall-mounting part 
• Aluminium plinth 
• Bent corner 
• Articulated corner coupling 
• Top and middle rail

VERTIC GUARD RAIL ON STEEL DECK

Compatibility : Can be installed on all steel roofing, dry orsandwich panels, installed in accordance with DTU 40.35. 

Special Extension Arm : 

• The arm, fitted with modular mounting plates, can be installed in either direction of the roof corrugations. 
• In the standard version, they can be fitted with a distance between corrugations of 250 or 333 mm

Modular Installation : Can be mounted on the support perpendicular or parallel to the corrugations. Water Tightness Of The Roof : 

• The watertightness of the roof is guaranteed owing to EPDM seals and the use of 6 waterproof rivets.

VERTIC VERTIRAIL

Vertic Vertirail is a vertical rail system which allows free movement all along the rail without unclipping on the most varied vertical structures (ladders, wind turbines, pylons etc.). Especially designed for significant heights, the Vertirail systems provides a great fluidity while ascending or descending.

Physical Properties

Segments

Standards

Lifespan and other information

Vertic Fixed Intermediate Piece - IFR90

• Rigid piece enabling the carriage to pass easily on both sides of the lifeline without unhooking.
• Several possibilities of orientations.

Vertic Moving Intermediate Piece - IMR

The mobility of the piece enables the operator to work on both sides of the line, without unclipping.

VERTIC SIMPLE FIXING KIT ON BEAM 150 TO 250MM, HEIGHT : 50MM MAX

VERTIC KIT 2 CLAMPS FOR POST ON BEAM >350MM (CUSTOM)