WORKSafe® TRIPOD BAG FOR TM-9

Equipment:

• two non-adjustable handles for carrying,
• Velcro closures
• Material    reinforced PVC
• Weight : 1250 g
• Dimensions:1800 x 230 x 200 mm
• Capacity: 75 l

WORKSafe® RUP-502 RESCUE LIFTING DEVICE 25M

RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m.

With the ratio used in the mechanism it is possible to make one turn of the drum per 5 turns of the winch’s crank.

The crank arm is available in 2 lengths which, depending of the variant chosen, enable torque adjustment.

• Rescue lifting and lowering device.
• Automatic brake.
• Steel galvanized cable of diameter 6.3mm.
• Available in 20m and 25m length.
• Weight: 13kg.
• Working load: 180kg and breaking force: 1,800kg.
• Tested and approved to EN1496 Class B standards.

Accessories:

• Spring-type energy absorber SDW
• Pulley PL 101

COMPATIBLE WITH :

• TM 9
• TM 9-L
• TM 9-W

WORKSafe® TM-9 SAFETY TRIPOD WITH WEBBING & CHAIN

• Safety tripod TM 9 is a portable anchoring device intended for single person use only.
• The head is made of powder coated galvanized steel.1 central anchor point eye bolt and 3 additional side anchor points.
• Aluminium legs with 7-step adjustment, locked with cotters.
• Steel feet have rubber pads for flat surfaces and spiked edges for slippery surfaces.
• Tripod legs can be secured with textile webbing or steel chain.

Product Specifications

• Material    aluminium
• Weight    16,50 kg (without other devices)
• Transport dimensions    180 x 24 x 24 cm
• Height    147 - 229 cm
• Diameter: 119 to 182cm
• Working load limit: 500kg and breaking force: 22kN.
• Zinc-plated, painted steel head with four anchor points.
• Aluminium adjustable legs, come with webbing and chain to prevent legs spreading and collapsing.
• Tested and approved to EN795 standards.

Honor Manriding Winches MRW15

To lower and hoist workers into and from confi ned spaces, heights, etc. and rescue. Available with max. 15 meters (MRW15) cable length.

Specifications:

• Man-rated for raising, lowering or supporting workers
• Designed specifically for confi ned space entry and retrieval
• Usage counter monitors extent of winch use
• Load can only move if the handle is turned – friction brake is engaged by a minimum of 2 kg (5 lbs) weight

Honor RescueSlide

The HONOR RescueSlide has been specially developed to safely enter confined spaces and, in the event of calamities, to rescue the victim. Every betreder enters and leaves the barrel easily via this ‘rescue slide’, also gas pack carriers! During rescue in emergencies and rescue operations the RescueSlide victims ‘perfectly’ creates.

Simply enter tanks and other confined spaces

The difficult entry and rescue through horizontal manholes is a thing of the past with the HONOR RescueSlide®! This specially designed rescue slide is simply clamped onto the flange and makes it easy to enter tanks and the like.

Quick rescue from tanks and other confined spaces

In the event of a calamity, people can be rescued from the confined space quickly and easily. The ergonomic design of the slide prevents injuries to a user or victim. The HONOR RescueSlide can be used independently and in combination with a FlangeClamp anchor device and fall arrest device with integrated red function.

RescueSlide (rescue slide) and Hanging Ladder system

The Hanging ladder consists of lengths of 1 meter hinged to the RescueSlide and each other. This system can easily be fed into the container from the outside of the container and removed after finishing work!

Features:

• Manhole diameters: (Standard RescueSlide version) 500 mm (20 “) and 600 mm (24”)
• On customer request: other cross-sections, shapes, tubelure lengths etcetera
• Negligible decrease in manhole transit
• Mounting by clamping (“frog”) on manhole flange
• Ergonomic design
• Aluminum (powder coated in RAL colors on request)
• Modular and complete system with: HONOR anchor points: FlangeKlem®, tripod, TwinSleeve® davit and TankKlem®, STAR series fall arresters and rescue apparatus;
• Minimal obstruction for the manhole
• Ergonomic design
• Made entirely of aluminum, it is clamped to the flange
• Fits almost all types / sizes of flanges
• Together with the Honor Tank Clamp and a Honor fall stop device with red function, the RescueSlide is the ideal set to save people from a horizontal manhole in the event of a calamity.

Specifications:

Miller Manhandler Hoist 3/16" S/S CABLE 65FT - 8442SS/65FT

The Miller 8842SS/65FT ManHandler Hoist / Winch is perfect for a wide range of safety applications such as positioning, rescue, confined space entry, and material / personnel handling. Additional fall arrest system recommended for proper fall protection.

Features:

• Durable, compact steel construction
• Winding action is smooth and controlled
• Effortless lowering and lifting with a gear ratio of 5:1
• Crank handle anti backlash braking system to prevent freewheeling
• Mounting bracket built in
• 400 pound (181.4 kilograms) working capacity

Specifications:

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Durahoist Two-Piece Adjustable Upper Mast - DH-23

Specifications

Materials

• General Construction: Welded Aluminum.
• Weld Certification: AWS.
• Hardware: Gr.5, Zinc Plated.
• Material Structure: 6061-T6, 5052-H32, 7075-T6 Aluminum,Black Acetal, White UHMW Polyethylene.
• Block Anchor: 304 Stainless Steel.
• Finish: Safety Yellow Powder Coat.

Technical

• Rated Capacity: 450 lbs (204kg).
• Working load limit @ minimum 4:1 Design Factor
• Proof Load Ratings Anchor Points A) Standard.
• Pin Position 1,2,3 and 4 1,800lb (8kN).
• Weight 29 lbs (13.2 kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Durahoist™ Three-Piece Portable Base - DH-24

Specifications

Materials

• General Construction : Welded Aluminum.
• Weld Certification : AWS.
• Hardware : Zinc Plated.
• Material Structure : 6061-T6, 5052-H32, 7075-T6 Aluminum, Mild Steel, Black Acetal, Black Vinyl.
• Finish : Safety Yellow Powder Coat.

Technical

• Rated Capacity : 450lbs (204kg) working load limit @ minimum 4:1 Design Factor.

Mast Moment

• Proof Load : 90,000 in-lbs (10,200 N.m).
• Mast Rotation : 180°.

Weights 

• Base Center : 39 lbs (17.7kg).
• Base Legs : (x2) 28 lbs (12.7kg).
• Total : 95 lbs (43.1kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Tuff Built Horizontal Entry Arm - 30235

• Part # : 30235 Horizontal Entry Arm.
• Weight : 37.0Lbs(16.8kgs).

Tuff Built External Clamping Base for Hes - 30321

• Part # : 30321 Base, Clamp-On Horizontal Entry w/Mast (30303).
• Weight : 80.0Lbs(36.4kgs).

Intermediate Bracket (Blue) - R010.210.036

(Spare Part of The HONOR FlangeClamp®)

Mobile Anchor for horizontal manholes (ANSI & API 20” & 24” flanges) The HONOR FlangeClamp® is designed as an mobile anchor point on horizontal manholes, especially ideal in case of little space between vessel and flange in front of the manhole (platform).

Features:

Anchor point for:

• Self Retractable Lifelines
• Recovery Blocks
• Rescue devices
• Man Riding Winches

FlangeClamp standarized for ANSI & API 20”& 24” flanges. Recovery Blocks, SRL’s, Manriding Winches, Rescue & Evacuation devices can be mounted onto FlangeClamp (also modular with STAR®-series devices, TankClamp®, Tripod and Davit)!

Extra benefit:

FlangeClamp and RescueSlide® together are an ideal kit for confined entry & rescue through horizontal manholes!

Honor MOD450 Multiple Person Descent & Rescue (lifting) Device (max. 450 m descent height)

The MOD450 has an integrated automatic descent module and recovery winch (lifting & lowering) and is an ideal device to escape from heights and recover victims from steep slopes, heights and confined spaces. This multi-functional recue/descent device is even more useful when combined with a Tripod or Davit.

Features:

• Modular automatic descent-brake
• Modular integrated manual rescue winch
• Very low winch force (< 10 daN) needed to lift users/victims
• Swivable connection eye
• Very low examination & inspection costs
• STAR-series® industrial design

Specifications:

Honor Sheath Core Rope (Kernmantel)

(Spare Part of MOD450 Device)

Multiple Person Descent & Rescue (lifting) Device (max. 450 m descent height). The MOD450 has an integrated automatic descent module and recovery winch (lifting & lowering) and is an ideal device to escape from heights and recover victims from steep slopes, heights and confined spaces.

Specifications:

Lifeline: specific Kernmantel 9.5 mm EN 1891 Type A

Miller Mn10 Miller Aluminum Tripod - 1005041

• Aluminium Tripod Confined Space.
• The Miller tripod used in conjunction with the Miller fall arrest blocks and winches, form the core of a stable and secure confined entry / rescue system. 
• Suitable for use on manholes, tanks, hatches and other below-ground work and confined spaces.
• 2 anchorage points and adjustable and lockable legs. 
• Rubber Protection.
• Stainless steel pulley included.

Feature & Benefit

• Feature : Two anchorage points. Supplied with one pulley.
• Benefit : Easily installed by one person, the self-locking, fully adjustable legs lock securely in place thanks to the automatic pins. No chains are needed to secure the feet, which greatly reduces the risk of tripping.

Industry

• Telecoms.
• Utilities.

Certification

• EC Category PPE : 3.
• Quality Assurance : ISO 9001 / 2000.
• EC Certificate Number : 333 AFAQ.
• EC Attestation : EC Attestation.
• EC Attestation Number : 0082/490/160/09/01/0297.

Technical Specifications

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Manhandler Hoist 3/16" Gal Steel Cable 65FT - 8442/65F

65-ft; Mounting Bracket; Pulley; Carabiner; For personnel positioning, confined space entry, and rescue. A secondary fall arrest system is recommended for fall protection.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Winch Mount Bracket - DH-19-

Materials

• General Construction: Extruded Aluminum.
• Finish (aluminum): Black Powder Coat.
• Hardware: Gr.5 Zinc Plated.

Technical

• Working Load: 450lbs (204kg).
• Tensile Strength: 5,000lbs (22kN).
• Weight: 1.6lbs (.7kg).

Certification

• Meets applicable ANSI Z359.1, A10.32 and OSHA 1910.146, 1926.502 requirements.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Complete Miller/Durahoist Assembly - DH-19-MILLER-

Materials

• General Construction: Extruded Aluminum.
• Finish (aluminum): Black Powder Coat, Clear Anodize.
• Hardware: Gr.5, Gr.8 - Zinc Plated.

Technical

• Working Load: 450lbs (204kg).
• Tensile Strength: 5,000lbs (22kN).
• DH-19-MILLER.
• Weight: 3.1lbs (1.4kg).

Certification

• Meets applicable ANSI Z359.1, A10.32 and OSHA 1910.146, 1926.502 requirements.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Lower Mast Extension - DH-22-21

• Designed for manhole and confined space entry /retrieval and fall arrest applications.
• System breaks down into four lightweight aluminum components for easy storage, transport and set-up. No tools required for assembly.
• Modular design allows the use of various fixed and portable bases and an optional mast with extensions. Multiple winches and/or lifeline systems may be mounted as required.

Suggested Applications:

• Public Utilities: Vault and manhole entry, pump/lift/valve stations, water treatment and wastewater industries.
• General Industry (Food, Chemical, Pulp & Paper): Elevated manholes, storage tanks, platforms/ mezzanines, underground vaults, clarifier tanks, pre-heaters.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller One Piece Adjustable Mast - DH-3

Specifications

Materials

• General Construction : Welded Aluminum.
• Weld Certification : AWS.
• Hardware : Gr.5, Zinc Plated.
• Material Structure : 6061-T6, 5052-H32,7075-T6 Aluminum.
• Block Anchor : 304 Stainless Steel.
• Finish : Safety Yellow Powder Coat.

Rated Capacity

• 450lbs (204kg).
• Working load limit @ minimum 4:1 Design Factor.

Proof Load Ratings - Anchor Points

A) Standard 

• Pin Position 1 & 2 5000lbs (22kN).
• Pin Position 3 3600lbs (16kN).
• Pin Position 4 3000lbs (13kN).

B) Optional 5000lbs (22kN).

Winch/SRL Mount Positions

A) Rear Mount

• Pin Position 1 & 2 5000lbs (22kN).
• Pin Position 3 3600lbs (16kN).
• Pin Position 4 3000lbs (13kN).

B) Front Mount

• Pin Position 1 & 2 2500lbs (11kN).
• Pin Position 3 & 4 1800lbs (8kN).

Weight : 29lbs (13kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Three-Piece Portable Base - DH-4

Specifications

Materials

• General Construction : Welded Aluminum.
• Weld Certification : AWS.
• Hardware : Zinc Plated.
• Material Structure : 6061-T6, 5052-H32, 7075-T6 Aluminum, Mild Steel, Black Acetal, Black Viny.
• Finish : Safety Yellow Powder Coat.

Rated Capacity

• 450lbs (204kg).
• Working load limit @ minimum 4:1 Design Factor.

Mast Moment

• Proof Load: 90,000 in-lbs (10,200 N.m).
• Mast Rotation: 180°.

Weights 

• Base Center : 21lbs (9.5kg).
• Base Legs : (x2) 20lbs (9.1kg).
• Total 61lbs : (27.7kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Floor Mount Sleeve (Zinc Plated) - DH-7ZP-

Specifications

Materials

• General Construction : Welded Steel.
• Weld Certification : AWS.
• Base Material : A-36 Steel Plate.
• Material Structure : Sch.40 Pipe.
• Sleeve Bearing Material : PVC Pipe, ASTM-D-1785.
• Thrust Bearing Material : High Density Polyethylene.
• Finish (Steel Sleeves) : Zinc Chromate.
• Plating Specification : ASTM Designation, B633-85, Type II, SC2.

Technical

• Rated Capacity: 450lbs (204kg) working load limit @ minimum 4:1 Design Factor.
  Proof Load : 90,000 in-lbs (10,200 N.m).
• Mast Rotation : 360°.
• Weight : 13 lbs (5.9kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Durahoist Aluminum Portable Fall- DH-AP-1

Specifications

Materials

• General Construction : Welded Steel.
• Weld Certification : AWS.
• Material (aluminum) : 6061-T6 Aluminum.
• Material (steel) : H.R. Steel Plate.
• Material (plastic) : Sch. 40 Pipe.
• Finish (aluminum) : Powder Coat.
• Finish (steel) : CS-500 Zinc Plated.
• Swivel Ring Bushing : PVC Pipe, ASTM-D-1785.
• Hardware : Gr.5, Gr.8 –Zinc Plated.
• Plating Specification : ASTM Designation B633- 85, Type II, SC2, CS-500 Lechant/Sealant Process.

Technical

• Working Load Fall Arrest : 3 Workers using 900lb MAF Shock Absorbers.
• Safety Factor : Minimum 2:1
• Material Handling (w/ model DH-AP-3 Davit Arm) : 310lbs (141kg).
• Safety Factor : 10:1.
• Rescue : 310lbs (141kg).
• Safety Factor : 10:1.
• Proof Load : 4200lb (18.7kN) Pulled from 72” (1828.8mm) from post centerline (53° to vertical).
• Proof Load Moment : 190,000 in-lbs (21.5 kN-m).
• Horizontal Lifeline Anchor Point Proof Load : See Page 2.
• Proof Test : AWS.
• Weight : 38lbs (17.2kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Durahoist Aluminum Portable Fall Arrest - DH-AP-2

Specifications

Materials

• General Construction : Machined Aluminum.
• Tubular Components : 6061-T6 Aluminum.
• Anchor Point Eye : Mild Steel, CS-500 Zinc Plated.
• Plating Specification : ASTM B-633 Type II SC2, CS-500 Leachant/Sealant Process.
• Finish : Powder Coat.

Technical

• Rated Capacity (Working Load) : 310lbs (141kg).
• M.A.F rating for retractable devices or shock absorbers : 900lbs (4kN) Proof Load.
• (Anchor Point Eye) : 2250lbs (10kN) @ 45°.
• Weight : 4.5lbs (2.0kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Weld-On Plate - DH-AP-5

Specifications

Materials

• General Construction : Welded Steel .
• Weld Certification : AWS-47.1.
• Material: HR Plate and Bar.
• Finish : Provided in bare steel for welding.

Technical

• Proof Load Moment : 190,000 in-lbs (20.8 kN-m).
• Weight : 11.6lbs (5.2kg).

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

North Portable Tripod With Safety Chain - FP6600-7

Adjustable tripod with cast aluminum head, built in pulleys and two swivel eye bolts. Lightweight adjustable legs, non-slip feet, safety chain to wrap around legs. Exceeds all ANSI static load requirements.

• Portable Tripod with safety chain around legs - 7'.

Protekt Tripod - With Webbing For Legs Fixing - TM 9

• The head is made of powder coated galvanized steel.1 central anchor point eye bolt and 3 additional side anchor points.
• Aluminium legs with 7-step adjustment, locked with cotters.
• Steel feet have rubber pads for flat surfaces and spiked edges for slippery surfaces.
• Tripod legs can be secured with textile webbing or steel chain.

Specifications

Protekt Rescue Lifting Device - RUP 502 20 M

• RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m.
• With the ratio used in the mechanism it is possible to make one turn of the drum per 5 turns of the winch’s crank.
• The crank arm is available in 2 lengths which, depending of the variant chosen, enable torque adjustment.

Accessories

• Spring-type energy absorber SDW
• Pulley PL 101

Compatible With

• TM 9
• TM 9-L
• TM 9-W 

Specifications

Protekt Rescue Lifting Device -RUP 502 25 M

• RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m.
• With the ratio used in the mechanism it is possible to make one turn of the drum per 5 turns of the winch’s crank.
• The crank arm is available in 2 lengths which, depending of the variant chosen, enable torque adjustment.

Accessories

• Spring-type energy absorber SDW.
• Pulley PL 101.

Compatible With

• TM 9
• TM 9-L
• TM 9-W 

Specifications

Tuff Built Package, Horizontal Entry System - 20073

• Part # : 20073 Package, Horizontal Entry System (30235, 30222, 60207).
• Weight : 151.0Lbs(68.6kgs).

WORKSafe® TM-13 ALUMINIUM SAFETY TRIPOD- AT015

Safety tripod TM 13 is a portable anchoring device which does not requires pulley when operating winches. Has steps for easier access to the head. The device can be used by 2 persons at the same time.

The head is made of powder coated galvanized steel and has two wheels for guiding the work rope of rescue devices. Cotters above wheels prevent the rope from slipping during work.

The tripod legs are made of strengthened aluminium profiles with 9-step adjustment, locked with cotters. Two legs “A” are equipped with a wheel (for guiding the work rope) and anchor point (bore) for mounting winches; the third leg “B” has no wheel or anchor point.

• Aluminium steps are mounted with cotters and provide easier access to the tripod head when extending the legs to their maximum height.
• Steel feet have rubber pads for flat surfaces and spiked edges for slippery surfaces.
• The tripod’s legs can be secured with textile webbing or steel chain.

• Material    aluminium
• Weight    37,00 kg (without other devices)
• Transport dimensions    200 x 33 x 31 cm
• Height    179 - 289 cm

WORKSafe® RUP-502 RESCUE LIFTING DEVICE 20M

RUP 502 is a winch equipped with a clamp for mounting on tripod leg. The winch is equipped with six-strand steel cable with natural fibre kern of 20 and 25 m in length and 6.3 mm in diameter; RUP 502 is a component of rescue equipment. The device, can be lifted from a lower level onto a higher level or vice-versa. The descent distance cannot be more than 2 m.

With the ratio used in the mechanism it is possible to make one turn of the drum per 5 turns of the winch’s crank.

The crank arm is available in 2 lengths which, depending of the variant chosen, enable torque adjustment.

• Rescue lifting and lowering device.
• Automatic brake.
• Steel galvanized cable of diameter 6.3mm.
• Available in 20m and 25m length.
• Weight: 13kg.
• Working load: 180kg and breaking force: 1,800kg.
• Tested and approved to EN1496 Class B standards.

Accessories:

• Spring-type energy absorber SDW
• Pulley PL 101

COMPATIBLE WITH :

• TM 9
• TM 9-L
• TM 9-W

Worksafe ALU Anchor Beam And Bag - AT061

Light aluminium alloy anchor beam AT 061 is a component of fall protection equipment and can be used as a portable anchor device. The beam can be used in building openings (windows and doors), 300 to 1270mm wide. It is fitted with two fixing plates.

• Lightweight (3.2kg) aluminum anchor beam.
• Adjustable width from 300mm to 1,270mm.
• Designed for 1 worker.
• Comes with a convenient carrying bag for mobility.
• Tested and approved to EN795 Class B standards.
• Dimensions    1455 x 122 x 100 mm
• Weight    3,2 kg
• Static strength    Min. 12 kN

Honor FlangeClamp®

Mobile Anchor for horizontal manholes (ANSI & API 20” & 24” flanges) The HONOR FlangeClamp® is designed as an mobile anchor point on horizontal manholes, especially ideal in case of little space between vessel and flange in front of the manhole (platform).

Features:

Anchor point for:

• Self Retractable Lifelines
• Recovery Blocks
• Rescue devices
• Man Riding Winches

FlangeClamp standarized for ANSI & API 20”& 24” flanges. Recovery Blocks, SRL’s, Manriding Winches, Rescue & Evacuation devices can be mounted onto FlangeClamp (also modular with STAR®-series devices, TankClamp®, Tripod and Davit)!

Extra benefit:

FlangeClamp and RescueSlide® together are an ideal kit for confined entry & rescue through horizontal manholes!

Specifications:

Intermediate Bracket (Blue) - R010.210.034

(Accessory of The TankClamp®)

Mobile Anchor on storage tanks, (concrete) pits, etc. The TankClamp® is a mobile anchor that can be placed over edges of storage tanks, (concrete) pits, beams, walls, etc. TankClamp can be used for both vertical fall arrest, rescue equipment and horizontal life line systems (HLL). 

Vertical application:

The TankClamp (with Intermediate Bracket) & STAR-series devices can be used in a vertical application for safe entry of confined spaces. After a fall occurred the SRL can also be used for the rescue operations.