ClimbTech Beam Trolley

A removable and reusable rolling I-beam anchor, easy to place and remove. This anchor is designed to easily
roll along the beam while trailing the worker.

• Weight: 7.7lbs.
• Beam Flange Width: 3″ – 10″.
• Breaking Strength: 5,000 lbf / 22kN.
• Compliance: ANSI Z359 & CE-EN 795.

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech Super Slider I-Beam Anchor

A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily
glide along the beam while trailing the worker. Available in two sizes that are adjustable from 3”-12” and a 12”-30”
with a flange thickness between .25” and 1.25” (2.5"" max thickness for the BWA030N).

• Range: 3.5″ to 12″.
• Breaking Strength: 5,000 lbf / 22kN.
• Weight: 3.5-lbs / 1.58 kg.
• Compliance: ANSI Z359 & CE-EN 795.

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech Super Slider I-Beam Anchor

A removable and reusable sliding I-beam anchor, easy to place and remove. This anchor is designed to easily
glide along the beam while trailing the worker. Available in two sizes that are adjustable from 3”-12” and a 12”-30”
with a flange thickness between .25” and 1.25” (2.5"" max thickness for the BWA030N).

• Range: 12″ to 30″
• Breaking Strength: 5,000 lbf / 22kN
• Weight: 7.4-lbs / 3.35 kg
• Compliance: ANSI Z359 & CE-EN 795

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

Basic Rescue Ladder Kit

The Rescue Ladder Basic System is designed for rescuing a worker in the event of a fall with minimal prior rescue training. The system is simple to deploy using the existing or a temporary anchor point allowing the victim to climb safely.

Components:

• -18ft webbed ladder
• -ClimbTech ANSI  Z359.12 Steel Carabiner (30kN)
• -Deployment Bag

• -OSHA 1910.66/ OSHA 1926.503 compliant
• -Maximum capacity of 310lbs
• -Breaking Strength: 5,000lbs/ 22kN

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech Raf075n RB Anchor

One of our most popular RB anchors, this portable concrete anchorage connector can be used in a variety of fall protection applications.

Features:

• Size: 3/4″
• Breaking Strength: 5,000 lbf / 22kn
• Compliance: ANSI Z359.7 & CE-EN 795
• Weight: 0.4-lbs

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech Straight Loop Insert

The Straight Loop Insert is a pre-installed receptacle that is cast-in place during construction of the surface for the purpose of attaching an ANSI/OSHA certified anchorage connector once the concrete is cured to at least 3000psi.

Features:

• Mechanical alternative to concrete anchor web straps.
• Breaking Strength of 10,000 lbs.
• Complies with both OSHA 1910.66 and OSHA 1926.502 and compatible with ANSI rated anchorage connectors.
• Easily identifiable due to the orange housing.

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech Zinc Plated Mega Swivel 5K

Weighing only 386g (.85-lbs) the Swivel Anchor can be installed on concrete and steel structure with a variety of installation kits available to suit your application.

Features:

• Weight: 0.8-lbs (.36kg).
• Breaking Strength: 5,000 lbf / 22kN.
• Compliance: ANSI Z359.

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

CLIMBTECH MEGA Swivel 5K Anchor

The 5K Swivel Anchor can be installed on concrete and steel structures with a variety of installation kits available to suit your application.

The anchor incorporates a revolutionary swivel ring design that allows a D-ring to rotate 360 degrees as well as flip back and forth at 180 degrees. The Swivel Anchor’s incredible strength is due to a heavy gauge heat treated alloy steel, reinforced bridge, D-ring, and locking caps. Its patent pending key lock design keeps the D-ring seated and locked into its swivel housing, preventing the steel from spreading outward during heavy loads. It can be used in both steel and concrete applications for rescue applications, lifting, hoisting, tie-back, etc.

Components:

• Minimum Breaking Strength (MBS): 5,000-lbf (22kN) 
• Working Load: 1,000-lbs (454kg) 
• DIMENSIONS: Weight: 1.2-lbs

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

ClimbTech RTL Toggle Anchor

Our newest anchor! This versatile, portable concrete/steel anchorage connector, used exclusively for fall protection, can be inserted inside precast concrete and steel flanges.

Features:

• Size: 3/4″.
• Breaking Strength: 5,000 lbf / 22kN.
• Compliance: ANSI Z359 & CE-EN 795.
• Weight: 0.45-lbs.

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

CLIMBTECH Vertical / Fixed Beam Clamp

The VBC014N is a fixed I-beam anchor that is easy to operate and designed to clamp onto a vertical or horizontal I-beam to create a fixed anchor point.

Components:

Zinc Plated Steel Swivel D-Ring 

Zinc Plated Steel Support Bar

Zinc Plated Steel Flange Hooks

• ANSI Z359.18, ANSI Z359.7, OSHA 1910.66/ OSHA 1926.503, EN 795:2012 compliant
• -Static Tensile Strength: 5,000-lbf/22kN
• -Maximum Capacity 310lbs when used as a single point anchorage
• -Beam Flange Width Range: 4″-14″
• -Beam Flange Thickness: .25″-1.25″
• -Weight: 6.8lbs

About ClimbTech

ClimbTech is the industry leader in design and manufacturing of anchoring equipment and hardware for Rock Climbing, Fall Protection and Rope Access for Miners, Construction Workers, Contractors and Climbers. Success stories made possible by ClimbTech products.

Hilti 2004207 STD Stud Anchor HSA-R

Standard expansion anchor for uncracked concrete (SS316)

Features

• High loads (optimal utilization of the concrete strength)
• Fast and easy anchor setting with HS-SC and S-TB.
• Excellent edge and spacing distances.
• 3 embedment depths offering maximum flexibility.
• ETA approved torquing with SIW 14-A or 22-A impact wrench and S-TB.

Applications

• Wide range of outdoor or similar fastening applications in concrete in corrosive environments.
• Fastening facade brackets.
• Fastening columns and beams.
• Fastening brackets and channels.

Specifications

Hilti 2004208 STD stud Anchor HSA-R M12

Standard expansion anchor for uncracked concrete (SS316)

Features

• High loads (optimal utilization of the concrete strength)
• Fast and easy anchor setting with HS-SC and S-TB.
• Excellent edge and spacing distances.
• 3 embedment depths offering maximum flexibility.
• ETA approved torquing with SIW 14-A or 22-A impact wrench and S-TB.

Applications

• Wide range of outdoor or similar fastening applications in concrete in corrosive environments.
• Fastening facade brackets.
• Fastening columns and beams.
• Fastening brackets and channels.

Specifications

Hilti 2004210 STD Stud Anchor HSA-R M12

Standard expansion anchor for uncracked concrete (SS316)

Features

• High loads (optimal utilization of the concrete strength)
• Fast and easy anchor setting with HS-SC and S-TB.
• Excellent edge and spacing distances.
• 3 embedment depths offering maximum flexibility.
• ETA approved torquing with SIW 14-A or 22-A impact wrench and S-TB.

Applications

• Wide range of outdoor or similar fastening applications in concrete in corrosive environments.
• Fastening facade brackets.
• Fastening columns and beams.
• Fastening brackets and channels.

Specifications

Hilti 2004216 Standard Stud Anchor HSA-R M16

Standard expansion anchor for uncracked concrete (SS316)

FEATURES

Specifications

Hilti Injectable Mortar HIT-HY 200-R 330/2/EE 

• No hole cleaning required with the revolutionary new Hilti HIT-Z anchor rod
• Automatic hole cleaning with TE-CD and TE-YD drill bits in combination with Hilti vacuum cleaners
• Working time optimized for rebar and deep anchoring applications
• Suitable for use in cracked and uncracked concrete with all anchor rods and rebar
• Fulfills the requirements of the most demanding ICC-ES and ETA C2 approvals for seismic applications
• Post-installed rebars perform like cast-in connections
• Package Contents: 1x Foil pack, 2x Mixer, 1x Mixer extension

Specifications:

Hilti Anchor Rod HAS-E-R M10

Standard anchor rod for use with capsules (A4 SS)

Features

• Designed for use with Hilti HVU capsules in solid concrete
• Features a chisel tip to cut and mix the Hilti HVU capsule, embedment marking for easy setting and a conical head (M8-M24 only) to be used with separate setting tool.
• Short spacing and edge distances.
• Small drilling diameter, quick installation.

Applications

• Suitable for fastenings in concrete in combination with Hilti HVU capsules.

Specifications

Hilti Anchor Rod HAS-E-R M12

Standard anchor rod for use with capsules (A4 SS)

Features

• Designed for use with Hilti HVU capsules in solid concrete.
• Features a chisel tip to cut and mix the Hilti HVU capsule, embedment marking for easy setting and a conical head (M8-M24 only) to be used with separate setting tool.
• Short spacing and edge distances.
• Small drilling diameter, quick installation.

Applications

• Suitable for fastenings in concrete in combination with Hilti HVU capsules.

Specifications

Hilti HDM 330+HIT-CR+blower Combo

Features

• Easy and fast foil pack loading.
• No mortar dripping after pressure release.
• Ruggedly built to withstand tough jobsite conditions.
• Well balanced for better handling.
• High efficiency even at low temperatures.

Applications

• Injection of Hilti HIT adhesive mortar for fastening anchor rods and rebars in concrete and masonry.

Specifications

TankClamp®

Mobile Anchor on storage tanks, (concrete) pits, etc. The TankClamp® is a mobile anchor that can be placed over edges of storage tanks, (concrete) pits, beams, walls, etc. TankClamp can be used for both vertical fall arrest, rescue equipment and horizontal life line systems (HLL).

Mobile Anchor facility for:

• Height Safety devices (inertia reels, etc.)
• Recovery blocks
• Lanyards
• (Temporary) Horizontal lifeline systems (like HONORope-T)
• Rescue systems and descent device’s (evacuation)

TankClamp to be fixed by two steel fixation bolts with locking nuts. To prevent the wear of tank coatings, TankClamp has Erlaton® slide parts on the inside of clamp. The TankClamp is approved to be used by 2 people simultaneously. 

Recovery Blocks, SRL’s, lanyards, rope grip systems, Manriding Winches, Rescue & Evacuation devices can be placed onto the modular TankClamp (also modular with STAR®-series devices, FlangeClamp®, Tripod and Davit)!

Vertical application:

The TankClamp (with Intermediate Bracket) & STAR-series devices can be used in a vertical application for safe entry of confined spaces. After a fall occurred the SRL can also be used for the rescue operations.

Horizontal application:

HLL can be installed between two, opposite eachother placed TankClamps. Even a third TankClamp, 90° angle from HLL, with recovery or rescue device makes it possible to safeguard workers in e.g. pits, water tanks, etc.

Modular accessories:

• Intermediate Bracket
• Device Mounting bracket
• Device of your choice

Specifications:

Miller 416 D-Bolt Anchor W/O Hardware - 417

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchor or anchorage point. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs (22kN) per worker.

Features

• The Miller D-Bolt Anchor without hardware can be used with Miller approved 5/8" grade 8/18-8 bolt.
• This anchor is designed for one person with a maximum weight capacity of 400 lbs. (including tools).
• Meets or exceeds applicable OSHA standards for fall protection anchors.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Stainless Steel - 417SS

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchor or anchorage point. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs (22kN) per worker.

Features

• This D-Bolt anchor is constructed of Drop Forge Alloy Steel for durability.
• The Miller D-Bolt Anchor without hardware can be used with Miller approved 5/8" grade 8/18-8 bolt.
• This anchor is designed for one person with a maximum weight capacity of 400 lbs. (including tools).
• Meets or exceeds applicable OSHA standards for fall protection anchors.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Grip Friction Bolt Anchorage Connectors - 494

• Designed For Mining Applications -A portable/reusable anchorage connector, designed exclusively for use with a friction bolt. A safe anchor point for a single user is established when the Miller Grip Friction Bolt Anchor is inserted into a friction bolt with an outside diameter of 1-1/2 in. (39 mm).
• Multiple Applications - The Grip Friction Bolt Anchorage Connector can be used in mine shafts, railway or road tunnels and underground storage caverns.
• Quality Delivered-  Meets all aplicable ANSI A10.14, Z359.1 and OSHA 1926.502 requirements.

Features

• The reusable Miller Grip Friction Bolt Anchorage Connector can be removed and simply re-installed in a new location.
• Rated for 10,000 lbs. (4,536 kg) ultimate tensile strength.
• Miller Grip Friction Bolt Anchor can be used with SkyGrip™ Horizontal Lifeline components for a two-person system (see SkyGrip Kit [SG494/60FT] for details).

Specifications

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Grip Anchorage Connectors - 496

• For Use In Concrete Applications - A safe anchor point is established when the Miller Grip™ Anchor is inserted into a properly-sized, cured concrete hole. Designed for use in cured concrete with a compression strength of at least 3,000 psi (20.7 MPa) , it can be used for vertical or overhead/ceiling surface applications.
• Reusable -The Miller Grip™ anchor can be removed and simply re-installed in a new location.
• Mandatory Safety -A safe anchor point is established when the Miller Grip anchor is inserted into a properly-sized, cured concrete hole.

Features

• Designed for vertical or overhead/ceiling surface applications.
• Can be used with SkyGrip Horizontal Lifeline components; 400 lbs. (181.4 kg) capacity.
• Multi-use Grips can be used for anchoring scaffolding, material handling and removal of concrete debris after demolition.
• Constructed of stainless steel, aluminum and other non-corrosive materials for a longer service life.
• Designed for use in cured concrete with a compression strength of at least 3,000 psi (20.7 MPa).
• Color-coded to differentiate fall protection use per OSHA regulations.

Specifications

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Soll Clip With Eye For Mast Diameter 130Mm - BS-OESE

• Certified acc. to EN 795.
• Mast diameter: 130 mm.
• Complete with all mounting elements.
• Please indicate the exact mast diameter when placing the order.
• Material: Steel.
• Hot-dip galvanised.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Soll Clip With Eye For Mast Diameter 65Mm - BS-OESE

• Certified acc. to EN 795.
• Mast diameter: 65 mm.
• Complete with all mounting elements.
• Please indicate the exact mast diameter when placing the order.
• Material: Steel.
• Hot-dip galvanised.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller Soll Clip With Eye For Mast Diameter 75Mm - BS-OESE

• Certified acc. to EN 795.
• Mast diameter: 75 mm.
• Complete with all mounting elements.
• Please indicate the exact mast diameter when placing the order.
• Material: Steel.
• Hot-dip galvanised.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

Miller QuickPick Rescue Kits

Miller QuickPick™ Rescue Kits deliver peace of mind during unexpected, stressful peer-rescue situations. The rescuer can remotely attach the system to the suspended worker while remaining securely anchored on the walking/working surface. All rescue components are contained in one easy-to-store kit with no assembly necessary – only requiring an overhead anchorage.

Key Features

• Out-of-the-bag solution for prompt rescue - no assembly required.
• Quickly raise or lower a fallen worker to safety - avoid suspension trauma.
• Professional rescue solution - enhances worker safety and corporate rescue plan . 

Recommended Industries/Use

• Construction.
• Manufacturing.
• Municipal Services.
• Oil and Gas.
• Transportation.
• Utilities.
• Wind Energy.

Hazards

• Fall from height.

About Honeywell Miller

From harnesses to confined space systems, Miller specialises in all manner of fall protection products.

NORTH STAINLESS STEEL BEAM ANCHOR CLAMP - FITS FLANGES 89MM (3 1/2 IN) TO 305MM (12 IN WIDE)

Gliding beam anchor that mounts anywhere on a suitable metal beam.

Standard Features

• Adjustable to accommodate a wide variety of I-Beams
• Designed for use with self-retracting lifelines on horizontal I-Beams
• Removable at any point of the beam
• Travels with user to eliminate the swing fall

PROTEKT ENERGY ABSORBER SET 2 PERSONS(INCL.2XHL407/408 PIN SETS)

PROTEKT AC850 Line Guide (Stainless Steel)

PROTEKT AC910 Tensioner (Stainless Steel)

PROTEKT AC921 Line Guide Wire

PROTEKT AC930 Screw Clip

Protekt ALU Anchor Beam + Bag -  AT061

Specifications

Protekt Permanent Anchor Point - AT150

Specifications

PROTEKT 4 POINT LADDER RUNG MOUNTING PLATE (STAINLESS STEEL)

PROTEKT 6 POINT LADDER RUNG BEAM (HOT DEEP GALVANIZED)

Protekt ALU Anchor Clamp - AT250

Specifications

PROTEKT 2-point Mounting Plate

PROTEKT 3 POINT END STRUCTURAL ANCHOR POINT

PROTEKT 2 POINT ANCHOR PLATE

PROTEKT ATTACHMENT, I-BEAM FLANGE : 300MM

PROTEKT INTERMEDIATE STRUCTURAL ANCHOR POINT (DUO SYSTEM ONLY)

PROTEKT INTERMEDIATE STRUCTURAL ANCHOR POINT [PROLINER]

PROTEKT SPRING ENERGY ABSORBER

PROTEKT CABLE TENSIONER WITH SWAGELES (INCL. HL407/408 PIN SET)

PROTEKT PRETENSIONER

PROTEKT TURN ROLL - SET (INCL. HL407/408 PIN SET)

PROTEKT STAINLESS STEEL CABLE 8 MM WITH RIGID EYE

PROTEKT STEEL CABLE ( DIAMETER 8 MM )