|
ANDERSEN CO & MATS
ANDERSEN CORRUGATED SWITCHBOARD MATS – CUSTOMISE LENGTH PER FOOT, 3’ WIDTH X 9’
1015ACM781SSC3/9FT
|
|
|
|
ANDERSEN CO & MATS
ANDERSEN CORRUGATED SWITCHBOARD MATS – CUSTOMISE LENGTH PER FOOT, 3’ WIDTH X 9’
1015ACM781SSC3/9FT
Corrugated Switchboard Mats
- 1/4” non-conductive
- Type II, Class 2 meets additional testing for flame, oil and ozone resistance
- Protects workers from electrical shock by insulating against high voltage
- Corrugated Switchboard matting conforms to ASTM testing D-178-01
- Testing dielectric strength 30,000 volts
- Maximum use voltage is 17,000 volts
| Overall Mat Thickness |
¼” (0.25”) |
| Material |
Solid PVC |
| Color |
Black |
| Pattern |
Corrugated |
Testing
- Passes electrical proof test ASTM D178 (Min. 20,000 V for one minute)
- Passes dielectric breakdown test ASTM D149 (Min. 30,000 V)
- Passes O3 resistance test method B ASTM D178 (any visual degradation)
- Tensile strength ASTM D412 DIE C (Minimum 700 PSI)
o 1,318 PSI, PASS
- Elongation ASTM D412 DIE C (Minimum 250%)
o 317%, PASS
- Tension set ASTM D412 DIE B (Maximum 0.50 in.)
o 0.4827 in., PASS
- Moisture absorption ASTM D570 (Maximum increase 3%)
o 0.09%, PASS
- Accelerated aging ASTM D573 (Minimum 50% of original tensile strength)
o 1,363 PSI (103% of original tensile strength), PASS
- Flame resistance ASTM D178 Appendix (Maximum 0.5 in./12.7mm after 30 seconds)
o 0.12 mm/s, PASS
- Oil resistance ASTM D471 (Maximum volume increase 4%)
o 0.04%, PASS
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" BLACK BORDER STANDARD 22" X 33"
1100ACM421S2X3
|
|
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" BLACK BORDER STANDARD 22" X 33"
1100ACM421S2X3
HOG HEAVEN 5/8" BLACK BORDER STANDARD 22" x 33"
- Closed-cell nitrile blended cushion is permanently molded (not glued) to the nitrile rubber top surface
- Chemical-resistant, grease and oil-resistant; borders will not crack or curl
- Electrically conductive
- Welding safe
- Borders are beveled and are available with OSHA-approved color: yellow
- Recommended for distribution, manufacturing and retail facilities for picking lines, assembly lines, work stations, check-out stations, and more
Surface
- Rubber Type: Nitrile rubber
- Thickness: 0.120 inches
- Durometer: 65
- Tensile: 1,100 PSI
Cushion
- Type: Nitrile closed-cell foam
- Density: 5.5 – 7.5 lbs/ft3
- Water Absorption: ASTM D 1667 (0.01 lb/ft2 maximum)
- Temperature Use: ASTM D 1056
o Cold Crack: -20˚ F
o High: 200 ˚ F intermittent exposure
Testing & Other Key Features
- Passes flammability standard DOC-FF-1-70
- Passes AATCC test method 134-1996 electrostatic propensity of carpets (max. voltage -0.7 kV)
- ASTM C1028-96 static coefficient of friction:
o Dry: 0.92
o Wet: 0.86
- Electrically conductive
o Surface to ground 50% relative humidity 1.7 X 10^4 OHMS
o Surface to ground 12% relative humidity 2.9 X 10^4 OHMS
o Surface to ground 50% relative humidity 2.6 X 10^4 OHMS
o Surface to ground 12% relative humidity 4.9 X 10^4 OHMS
- Welding safe
- Certified slip resistant by the National Floor Safety Institute (NFSI)
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" BLACK BORDER – CUSTOMISE LENGTH PER FOOT, 2’ WIDTH
1100ACM421SSC2
|
|
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" BLACK BORDER – CUSTOMISE LENGTH PER FOOT, 2’ WIDTH
1100ACM421SSC2
HOG HEAVEN 5/8" BLACK BORDER – CUSTOMISE LENGTH PER FOOT, 2’ WIDTH
- Closed-cell nitrile blended cushion is permanently molded (not glued) to the nitrile rubber top surface
- Chemical-resistant, grease and oil-resistant; borders will not crack or curl
- Electrically conductive
- Welding safe
- Borders are beveled and are available with OSHA-approved color: yellow
- Recommended for distribution, manufacturing and retail facilities for picking lines, assembly lines, work stations, check-out stations, and more
Surface
- Rubber Type: Nitrile rubber
- Thickness: 0.120 inches
- Durometer: 65
- Tensile: 1,100 PSI
Cushion
- Type: Nitrile closed-cell foam
- Density: 5.5 – 7.5 lbs/ft3
- Water Absorption: ASTM D 1667 (0.01 lb/ft2 maximum)
- Temperature Use: ASTM D 1056
o Cold Crack: -20˚ F
o High: 200 ˚ F intermittent exposure
Testing & Other Key Features
- Passes flammability standard DOC-FF-1-70
- Passes AATCC test method 134-1996 electrostatic propensity of carpets (max. voltage -0.7 kV)
- ASTM C1028-96 static coefficient of friction:
o Dry: 0.92
o Wet: 0.86
- Electrically conductive
o Surface to ground 50% relative humidity 1.7 X 10^4 OHMS
o Surface to ground 12% relative humidity 2.9 X 10^4 OHMS
o Surface to ground 50% relative humidity 2.6 X 10^4 OHMS
o Surface to ground 12% relative humidity 4.9 X 10^4 OHMS
- Welding safe
- Certified slip resistant by the National Floor Safety Institute (NFSI)
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" STRIPE BORDER STANDARD 24" X 33"
1100ACM423S2X3
|
|
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" STRIPE BORDER STANDARD 24" X 33"
1100ACM423S2X3
HOG HEAVEN 5/8" STRIPE BORDER STANDARD 24" X 33"
- Closed-cell nitrile blended cushion is permanently molded (not glued) to the nitrile rubber top surface
- Chemical-resistant, grease and oil-resistant; borders will not crack or curl
- Electrically conductive
- Welding safe
- Borders are beveled and are available with OSHA-approved color: yellow
- Recommended for distribution, manufacturing and retail facilities for picking lines, assembly lines, work stations, check-out stations, and more
Surface
- Rubber Type: Nitrile rubber
- Thickness: 0.120 inches
- Durometer: 65
- Tensile: 1,100 PSI
Cushion
- Type: Nitrile closed-cell foam
- Density: 5.5 – 7.5 lbs/ft3
- Water Absorption: ASTM D 1667 (0.01 lb/ft2 maximum)
- Temperature Use: ASTM D 1056
o Cold Crack: -20˚ F
o High: 200 ˚ F intermittent exposure
Testing & Other Key Features
- Passes flammability standard DOC-FF-1-70
- Passes AATCC test method 134-1996 electrostatic propensity of carpets (max. voltage -0.7 kV)
- ASTM C1028-96 static coefficient of friction:
o Dry: 0.92
o Wet: 0.86
- Electrically conductive
o Surface to ground 50% relative humidity 1.7 X 10^4 OHMS
o Surface to ground 12% relative humidity 2.9 X 10^4 OHMS
o Surface to ground 50% relative humidity 2.6 X 10^4 OHMS
o Surface to ground 12% relative humidity 4.9 X 10^5 OHMS
- Welding safe
- Certified slip resistant by the National Floor Safety Institute (NFSI)
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 4’ WIDTH
1100ACM423SSC4
|
|
|
|
ANDERSEN CO & MATS
HOG HEAVEN 5/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 4’ WIDTH
1100ACM423SSC4
HOG HEAVEN 5/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 4’ WIDTH
- Closed-cell nitrile blended cushion is permanently molded (not glued) to the nitrile rubber top surface
- Chemical-resistant, grease and oil-resistant; borders will not crack or curl
- Electrically conductive
- Welding safe
- Borders are beveled and are available with OSHA-approved color: yellow
- Recommended for distribution, manufacturing and retail facilities for picking lines, assembly lines, work stations, check-out stations, and more
Surface
- Rubber Type: Nitrile rubber
- Thickness: 0.120 inches
- Durometer: 65
- Tensile: 1,100 PSI
Cushion
- Type: Nitrile closed-cell foam
- Density: 5.5 – 7.5 lbs/ft3
- Water Absorption: ASTM D 1667 (0.01 lb/ft2 maximum)
- Temperature Use: ASTM D 1056
o Cold Crack: -20˚ F
o High: 200 ˚ F intermittent exposure
Testing & Other Key Features
- Passes flammability standard DOC-FF-1-70
- Passes AATCC test method 134-1996 electrostatic propensity of carpets (max. voltage -0.7 kV)
- ASTM C1028-96 static coefficient of friction:
o Dry: 0.92
o Wet: 0.86
- Electrically conductive
o Surface to ground 50% relative humidity 1.7 X 10^4 OHMS
o Surface to ground 12% relative humidity 2.9 X 10^4 OHMS
o Surface to ground 50% relative humidity 2.6 X 10^4 OHMS
o Surface to ground 12% relative humidity 4.9 X 10^4 OHMS
- Welding safe
- Certified slip resistant by the National Floor Safety Institute (NFSI)
|
|
ANDERSEN CO & MATS
HOG HEAVEN 7/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 3’ WIDTH
1100ACM424SSC3
|
|
|
|
ANDERSEN CO & MATS
HOG HEAVEN 7/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 3’ WIDTH
1100ACM424SSC3
HOG HEAVEN 7/8" STRIPED BORDER – CUSTOMISE LENGTH PER FOOT, 3’ WIDTH
- Closed-cell nitrile blended cushion is permanently molded (not glued) to the nitrile rubber top surface
- Chemical-resistant, grease and oil-resistant; borders will not crack or curl
- Electrically conductive
- Welding safe
- Borders are beveled and are available with OSHA-approved color: yellow
- Recommended for distribution, manufacturing and retail facilities for picking lines, assembly lines, work stations, check-out stations, and more
Surface
- Rubber Type: Nitrile rubber
- Thickness: 0.120 inches
- Durometer: 65
- Tensile: 1,100 PSI
Cushion
- Type: Nitrile closed-cell foam
- Density: 5.5 – 7.5 lbs/ft3
- Water Absorption: ASTM D 1667 (0.01 lb/ft2 maximum)
- Temperature Use: ASTM D 1056
o Cold Crack: -20˚ F
o High: 200 ˚ F intermittent exposure
Testing & Other Key Features
- Passes flammability standard DOC-FF-1-70
- Passes AATCC test method 134-1996 electrostatic propensity of carpets (max. voltage -0.7 kV)
- ASTM C1028-96 static coefficient of friction:
o Dry: 0.92
o Wet: 0.86
- Electrically conductive
o Surface to ground 50% relative humidity 1.7 X 10^4 OHMS
o Surface to ground 12% relative humidity 2.9 X 10^4 OHMS
o Surface to ground 50% relative humidity 2.6 X 10^4 OHMS
o Surface to ground 12% relative humidity 4.9 X 10^4 OHMS
- Welding safe
- Certified slip resistant by the National Floor Safety Institute (NFSI)
|
