|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST PALM COATED, SIZE 6
510JWC30201S6
|
|
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST PALM COATED, SIZE 6
510JWC30201S6
ATG MaxiTherm Safety Gloves, Knitwrist Palm Coated 6
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-201 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
22.0 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Size |
Size 6 (XS) to 10 (XXL) |
EN 388:2016 + A1: 2018 |
1241B |
EN 511:2006 |
X1X |
Coating |
Palm coated knitwrist |
Length |
22 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Size |
Size 6 (XS) |
EN 388:2016 + A1: 2018 |
1241B |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST PALM COATED, SIZE 7
510JWC30201S7
|
|
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST PALM COATED, SIZE 7
510JWC30201S7
ATG MaxiTherm Safety Gloves, Knitwrist Palm Coated 7
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-201 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
23.5 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Size |
Size 7 (S) |
EN 388:2016 + A1: 2018 |
1241B |
EN 511:2006 |
X1X |
Coating |
Palm coated knitwrist |
Length |
22 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Size |
Size 6 (XS) to 10 (XXL) |
EN 388:2016 + A1: 2018 |
1241B |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 10
510JWC30202S10
|
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 10
510JWC30202S10
ATG MaxiTherm Safety Gloves Cut Level B, Knitwrist 3/4 Coated, Size10
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-202 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
3/4 coated knitwrist |
Length |
26 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2003 |
1241 |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
EN 388:2016 + A1:2018 |
1241B |
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 7
510JWC30202S7
|
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 7
510JWC30202S7
ATG MaxiTherm Safety Gloves Cut Level B, Knitwrist 3/4 Coated, Size 7
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-202 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
3/4 coated knitwrist |
Length |
23.5 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2003 |
1241 |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
EN 388:2016 + A1:2018 |
1241B |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 8
510JWC30202S8
|
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 8
510JWC30202S8
ATG MaxiTherm Safety Gloves Cut Level B, Knitwrist 3/4 Coated, Size 8
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-202 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
3/4 coated knitwrist |
Length |
24.5 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2003 |
1241 |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
EN 388:2016 + A1:2018 |
1241B |
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 9
510JWC30202S9
|
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 9
510JWC30202S9
ATG MaxiTherm Safety Gloves Cut Level B, Knitwrist 3/4 Coated, Size 9
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-202 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Specifications
Coating |
3/4 coated knitwrist |
Length |
26 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2003 |
1241 |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
EN 388:2016 + A1:2018 |
1241B |
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 10
510JWC34274S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 10
510JWC34274S10
ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist size 10
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.
High Dexterity, Comfort & Grip
-
ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for Cleaning
- Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388: 2016 + A1: 2018 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 8
510JWC34274S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 8
510JWC34274S8
ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist, Size 8
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.
High Dexterity, Comfort & Grip
-
ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for Cleaning
- Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
21.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388: 2016 + A1: 2018 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 9
510JWC34274S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 9
510JWC34274S9
ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist, Size 9
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.
High Dexterity, Comfort & Grip
-
ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for Cleaning
- Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388: 2016 + A1: 2018 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 10
510JWC34304S10
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 10
510JWC34304S10
ATG MaxiCut Oil Safety Glove Cut Level B, Size
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
25 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 11
510JWC34304S11
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 11
510JWC34304S11
ATG MaxiCut Oil Safety Glove Cut Level B, Size 11
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
26 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 5
510JWC34304S5
|
CUT RESISTANT GLOVES (CUT B)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 5
510JWC34304S5
ATG MaxiCut Oil Safety Glove Cut Level B, Size 5
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
25 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 5 (XXS) to 10 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 6
510JWC34304S6
|
CUT RESISTANT GLOVES (CUT B)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 6
510JWC34304S6
ATG MaxiCut Oil Safety Glove Cut Level B, Size 6
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
21 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Size |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 7
510JWC34304S7
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 7
510JWC34304S7
ATG MaxiCut Oil Safety Glove Cut Level B, Size 7
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
22 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Size |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 8
510JWC34304S8
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 8
510JWC34304S8
ATG MaxiCut Oil Safety Glove Cut Level B, Size 8
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Size |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 9
510JWC34304S9
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL B, SIZE 9
510JWC34304S9
ATG MaxiCut Oil Safety Glove Cut Level B, Size 9
Application
Recommended for use in oily or wet environments with cut risk.
Liquid resistant
Wearing the ATG MaxiCut Oil gloves protects you liquids
Cut resistant
- ATG MaxiCut Oil 34-304 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Size |
Size 5 (XXS) to 11 (XXL) |
EN 388:2003 |
4331 |
EN 388:2016 |
4331B |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 10
510JWC34504S10
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 10
510JWC34504S10
ATG MaxiCut Oil Safety Gloves Cut Level C, Knitwrist Palm Coated, Size 10
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals
Cut Resistant
- ATG MaxiCut 34-504 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and finres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
- ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
- ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
- GRIPtech Technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled
Coating |
Palm coated knitwrist |
Length |
25 cm |
Palm thickness |
1.30 mm |
Silicone free |
No |
Size |
Size 7(S) to 10(XL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 7
510JWC34504S7
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 7
510JWC34504S7
ATG MaxiCut Oil Safety Gloves Cut Level C, Knitwrist Palm Coated, Size 7
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals
Cut Resistant
- ATG MaxiCut 34-504 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and finres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
- ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
- ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
- GRIPtech Technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled
Coating |
Palm coated knitwrist |
Length |
22 cm |
Palm thickness |
1.30 mm |
Silicone free |
No |
Size |
Size 7(S) to 10(XL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 8
510JWC34504S8
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 8
510JWC34504S8
ATG MaxiCut Oil Safety Gloves Cut Level C, Knitwrist Palm Coated, Size 8
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals
Cut Resistant
- ATG MaxiCut 34-504 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and finres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
- ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
- ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
- GRIPtech Technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
1.30 mm |
Silicone free |
No |
Size |
Size 7(S) to 10(XL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 9
510JWC34504S9
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 9
510JWC34504S9
ATG MaxiCut Oil Safety Gloves Cut Level C, Knitwrist Palm Coated, Size 9
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals
Cut Resistant
- ATG MaxiCut 34-504 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and finres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
- ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
- ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
- GRIPtech Technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.30 mm |
Silicone free |
No |
Size |
Size 7(S) to 10(XL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 10
510JWC34505S10
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 10
510JWC34505S10
ATG MaxiCut Oil Safety Gloves Cut Level C, knitwrist 3/4 Palm Coated, Size 10
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
Cut Resistant
-
ATG MaxiCut 34-505 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm Coated Knitwrist |
Length |
25 cm |
Palm thickness |
1.60 mm |
Silicone free |
No |
Size |
Size 9(L) to 11(XXL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 11
510JWC34505S11
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 11
510JWC34505S11
ATG MaxiCut Oil Safety Gloves Cut Level C, knitwrist 3/4 Palm Coated, Size 11
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
Cut Resistant
-
ATG MaxiCut 34-505 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm Coated Knitwrist |
Length |
26 cm |
Palm thickness |
1.60 mm |
Silicone free |
No |
Size |
Size 9(L) to 11(XXL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 9
510JWC34505S9
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST 3/4 PALM COATED, SIZE 9
510JWC34505S9
ATG MaxiCut Oil Safety Gloves Cut Level C, knitwrist 3/4 Palm Coated, Size 9
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
Cut Resistant
-
ATG MaxiCut 34-505 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm Coated Knitwrist |
Length |
25 cm |
Palm thickness |
1.60 mm |
Silicone free |
No |
Size |
Size 9(L) to 11(XXL) |
EN 388:2003 |
4542 |
EN 388:2016 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 10
510JWC34774BS10
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 10
510JWC34774BS10
ATG® Maxiflex Elite Safety Gloves Cut Level A, Palm Coated, Size 10
Application
Recommended for use in dry environments revolving around mechanical work.
Electrostatic Resistance
Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards
- Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)
Cut Resistant
ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated |
Length |
22.5 cm |
Palm thickness |
0.75 mm |
Size |
Size 8(M) to 10(XL) |
EN 388:2016 |
4121A |
EN 16350:2014 |
Vertical resistance Rv<1,0 x 108Ω |
|
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 8
510JWC34774BS8
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 8
510JWC34774BS8
ATG® Maxiflex Elite Safety Gloves Cut Level A, Palm Coated, Size 8
Application
Recommended for use in dry environments revolving around mechanical work.
Electrostatic Resistance
Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards
- Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)
Cut Resistant
ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated |
Length |
21 cm |
Palm thickness |
0.75 mm |
Size |
Size 8(M) to 10(XL) |
EN 388:2016 |
4121A |
EN 16350:2014 |
Vertical resistance Rv<1,0 x 108Ω |
|
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 9
510JWC34774BS9
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED, SIZE 9
510JWC34774BS9
ATG® Maxiflex Elite Safety Gloves Cut Level A, Palm Coated, Size 9
Application
Recommended for use in dry environments revolving around mechanical work.
Electrostatic Resistance
Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards
- Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)
Cut Resistant
ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated |
Length |
22 cm |
Palm thickness |
0.75 mm |
Size |
Size 8(M) to 10(XL) |
EN 388:2016 |
4121A |
EN 16350:2014 |
Vertical resistance Rv<1,0 x 108Ω |
|
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 10
510JWC34800S10
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 10
510JWC34800S10
ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated, 24CM Grey, Size 10
Application
Recommended for general purpose handling in dirty condition.
Cut Resistant
ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
Glove’s light coating improves flexibility and dexterity.
-
Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.
-
Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.
-
Grips well in both wet and dry environment.
Cleanliness Guaranteed
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 7
510JWC34800S7
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 7
510JWC34800S7
ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated, 24CM Grey, Size 7
Application
Recommended for general purpose handling in dirty condition.
Cut Resistant
ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
Glove’s light coating improves flexibility and dexterity.
-
Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.
-
Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.
-
Grips well in both wet and dry environment.
Cleanliness Guaranteed
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 8
510JWC34800S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 8
510JWC34800S8
ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated, 24CM Grey, Size 8
Application
Recommended for general purpose handling in dirty condition.
Cut Resistant
ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
Glove’s light coating improves flexibility and dexterity.
-
Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.
-
Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.
-
Grips well in both wet and dry environment.
Cleanliness Guaranteed
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 9
510JWC34800S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFOAM SAFETY GLOVES CUT LEVEL A, KNITWRIST FINGER COATED, 24CM GREY, SIZE 9
510JWC34800S9
ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated, 24CM Grey, Size 9
Application
Recommended for general purpose handling in dirty condition.
Cut Resistant
ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
Glove’s light coating improves flexibility and dexterity.
-
Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.
-
Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.
-
Grips well in both wet and dry environment.
Cleanliness Guaranteed
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 10
510JWC34824S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 10
510JWC34824S10
ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 10
Application
Recommended for use in dry environments revolving around mechanical work.
Cut resistant
ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1 2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 7
510JWC34824S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 7
510JWC34824S7
ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 7
Application
Recommended for use in dry environments revolving around mechanical work.
Cut resistant
ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy
Coating |
Palm coated knitwrist |
Length |
20.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1 2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 8
510JWC34824S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 8
510JWC34824S8
ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 8
Application
Recommended for use in dry environments revolving around mechanical work.
Cut resistant
ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy
Coating |
Palm coated knitwrist |
Length |
21.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1 2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 9
510JWC34824S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 9
510JWC34824S9
ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 9
Application
Recommended for use in dry environments revolving around mechanical work.
Cut resistant
ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7(S) to 10(XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1 2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 10
510JWC34847S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 10
510JWC34847S10
ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 10
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
EROtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Drivers style knitwrist |
Length |
25 cm |
Palm thickness |
1.10 mm |
Silicone free |
No |
Sizes |
Size 7(S) to 11(XXL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 11
510JWC34847S11
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 11
510JWC34847S11
ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 11
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
EROtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Drivers style knitwrist |
Length |
25 cm |
Palm thickness |
1.10 mm |
Silicone free |
No |
Sizes |
Size 7(S) to 11(XXL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 7
510JWC34847S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 7
510JWC34847S7
ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 7
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
EROtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Drivers style knitwrist |
Length |
25 cm |
Palm thickness |
1.10 mm |
Silicone free |
No |
Sizes |
Size 7(S) to 11(XXL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 8
510JWC34847S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 8
510JWC34847S8
ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 8
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
EROtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Drivers style knitwrist |
Length |
25 cm |
Palm thickness |
1.10 mm |
Silicone free |
No |
Sizes |
Size 7(S) to 11(XXL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 9
510JWC34847S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ENDURANCE DRIVERS STYLE SAFETY GLOVES CUT LEVEL A, SIZE 9
510JWC34847S9
ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 9
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
EROtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Drivers style knitwrist |
Length |
25 cm |
Palm thickness |
1.10 mm |
Silicone free |
No |
Sizes |
Size 7(S) to 11(XXL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 10
510JWC348743S10
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 10
510JWC348743S10
ATG® Maxiflex® Cut 3 Safety Glove Cut Level B, Knit Wrist Palm Coated, Size 10
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
-
ATG MaxiCut 34-8743 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length (Size 10) |
24.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4331 |
EN 388:2016 + A1:2018 |
4331B |
ANSI/ISEA 105 (2016) |
A2 |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 8
510JWC348743S8
|
CUT RESISTANT GLOVES (CUT B)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 8
510JWC348743S8
ATG® Maxiflex® Cut 3 Safety Glove Cut Level B, Knit Wrist Palm Coated, Size 8
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
-
ATG MaxiCut 34-8743 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length (Size 10) |
24.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4331 |
EN 388:2016 + A1:2018 |
4331B |
ANSI/ISEA 105 (2016) |
A2 |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 9
510JWC348743S9
|
CUT RESISTANT GLOVES (CUT B)
|
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 9
510JWC348743S9
ATG® Maxiflex® Cut 3 Safety Glove Cut Level B, Knit Wrist Palm Coated, Size 9
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
-
ATG MaxiCut 34-8743 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length (Size 10) |
24.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4331 |
EN 388:2016 + A1:2018 |
4331B |
ANSI/ISEA 105 (2016) |
A2 |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 10
510JWC34874S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 10
510JWC34874S10
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size 10
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 11
510JWC34874S11
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 11
510JWC34874S11
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
23 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 6
510JWC34874S6
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 6
510JWC34874S6
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 7
510JWC34874S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 7
510JWC34874S7
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 8
510JWC34874S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 8
510JWC34874S8
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 9
510JWC34874S9
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A , KNITWRIST FINGER COATED 25 CM GREY, SIZE 9
510JWC34874S9
ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size
Application
Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
0.80 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 10
510JWC34875S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 10
510JWC34875S10
ATG MaxiFlex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 10
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
3/4 coated knitwrist |
Length |
23.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7 (S) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 7
510JWC34875S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 7
510JWC34875S7
ATG Maxiflex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 7
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
3/4 coated knitwrist |
Length |
20.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7 (S) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 8
510JWC34875S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 8
510JWC34875S8
ATG MaxiFlex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 8
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
3/4 coated knitwrist |
Length |
22 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7 (S) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 9
510JWC34875S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE SAFETY GLOVES CUT LEVEL A, KNITWRIST 3/4 PALM COATED, SIZE 9
510JWC34875S9
ATG MaxiFlex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 9
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
3/4 coated knitwrist |
Length |
23 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 7 (S) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 10
510JWC42874S10
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 10
510JWC42874S10
ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 10
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
Coating |
Palm coated |
Length |
22.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 8
510JWC42874S8
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 8
510JWC42874S8
ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 8
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
Coating |
Palm coated |
Length |
21.5 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 9
510JWC42874S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 9
510JWC42874S9
ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 9
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
Coating |
Palm coated |
Length |
22 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2003 |
4131 |
EN 388:2016 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 10
510JWC443745S10
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 10
510JWC443745S10
ATG® Maxicut® Ultra Safety Glove Cut Level C, Knit Wrist Palm Coated, Size 10
Application
Recommended for use in dry environments, with cut risks.
Cut Resistant
-
ATG MaxiCut Ultra 44-3745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand resting position. They also comes with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 8
510JWC443745S8
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 8
510JWC443745S8
ATG® Maxicut® Ultra Safety Glove Cut Level C, Knit Wrist Palm Coated, Size 8
Application
Recommended for use in dry environments, with cut risks.
Cut Resistant
-
ATG MaxiCut Ultra 44-3745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand resting position. They also comes with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 9
510JWC443745S9
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 9
510JWC443745S9
ATG® Maxicut® Ultra Safety Glove Cut Level C, Knit Wrist Palm Coated, Size 9
Application
Recommended for use in dry environments, with cut risks.
Cut Resistant
-
ATG MaxiCut Ultra 44-3745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand resting position. They also comes with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 10
510JWC56424S10
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 10
510JWC56424S10
ATG MaxiDry Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 10
Application
Recommended for use in oily or wet conditions.
Liquid Resistant
Wearing the ATG MaxiDry gloves helps increase resistance to oils.
- Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-424 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
24 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 8
510JWC56424S8
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 8
510JWC56424S8
ATG MaxiDry Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 8
Application
Recommended for use in oily or wet conditions.
Liquid Resistant
Wearing the ATG MaxiDry gloves helps increase resistance to oils.
- Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-424 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 9
510JWC56424S9
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 9
510JWC56424S9
ATG MaxiDry Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 9
Application
Recommended for use in oily or wet conditions.
Liquid Resistant
Wearing the ATG MaxiDry gloves helps increase resistance to oils.
- Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-424 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Coating |
Palm coated knitwrist |
Length |
23.5 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8(M) to 10(XL) |
EN 388:2003 |
4121 |
EN 388:2016 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 10
510JWC56426S10
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 10
510JWC56426S10
ATG® MAXIDRY® SAFETY GLOVE, GAUNTLET 26 CM, SIZE 10
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 26 cm |
Length (Size 10) |
26 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 9(L) to 10(XL) |
EN 388:2016 + A1:2018 |
4111A |
EN ISO 374-1:2016/Type C |
Yes |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 9
510JWC56426S9
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 9
510JWC56426S9
ATG MaxiDry Safety Gloves Cut Level A, Gauntlet 26 cm, Size 9
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 26 cm |
Length (Size 10) |
26 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 9(L) to 10(XL) |
EN 388:2016 + A1:2018 |
4111A |
EN ISO 374-1:2016/Type C |
Yes |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 10
510JWC56530S10
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 10
510JWC56530S10
ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 10
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.
-
Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type B |
JKL |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 8
510JWC56530S8
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 8
510JWC56530S8
ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 8
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.
-
Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type B |
JKL |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 9
510JWC56530S9
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 9
510JWC56530S9
ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 9
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.
-
Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.10 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type B |
JKL |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 10
510JWC56630S10
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 10
510JWC56630S10
ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size 10
Application
Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.
Chemial Resistance
Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms.
- Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
- Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
- Liquitech repels oils, liquids and chemicals.
Cut Resistance
ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 8
510JWC56630S8
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 8
510JWC56630S8
ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size 8
Application
Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.
Chemial Resistance
Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms.
- Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
- Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
- Liquitech repels oils, liquids and chemicals.
Cut Resistance
ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 9
510JWC56630S9
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 9
510JWC56630S9
ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size 9
Application
Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.
Chemial Resistance
Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms.
- Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
- Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
- Liquitech repels oils, liquids and chemicals.
Cut Resistance
ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
Size 8 (M) to 10 (XL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 35CM SIZE 9
510JWC56635S9
|
CHEMICAL RESISTANT GLOVES
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 35CM SIZE 9
510JWC56635S9
ATG® Maxichem® Safety Glove Cut Level A, Gauntlet 35cm Size 9
Application
Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.
Chemial Resistance
Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms.
- Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
- Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
- Liquitech repels oils, liquids and chemicals.
Cut Resistance
ATG MaxiChem 56-635 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Coating |
Gauntlet - 35 cm |
Length (Size 9) |
35 cm |
Palm thickness |
1.30 mm |
Silicone free |
Yes |
Sizes |
9(L) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 7
510JWC56630S7
|
CHEMICAL RESISTANT GLOVES
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICHEM SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 7
510JWC56630S7
ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size 7
Application
Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.
Chemial Resistance
Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms.
- Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
- Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
- Liquitech repels oils, liquids and chemicals.
Cut Resistance
ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Specifications
Coating |
Gauntlet - 30 cm |
Length |
30 cm |
Palm Thickness |
1.30 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S)- Size 11 (XXL) |
EN 388:2016+A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 8
510JWC56633S8
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 8
510JWC56633S8
ATG MaxiChem Cut Safety Gloves Cut Level B, Gauntlet 30cm, Size 8
Application
Recommended for use in chemical environments, designed for users working with chemicals where cut resistance is required.
Chemical Resistance
-
Gloves are of Type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
-
Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%
-
Liquitech repels oils, liquids and chemicals.
Cut Resistance
- ATG MaxiChem Cut 56-633 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environment with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Specifications
Coating |
Gauntlet - 30 cm |
Length |
30 cm |
Palm Thickness |
1.40 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S)- Size 11 (XXL) |
EN 388:2016+A1:2018 |
4342B |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 9
510JWC56633S9
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 9
510JWC56633S9
ATG MaxiChem Cut Safety Gloves Cut Level B, Gauntlet 30cm, Size 9
Application
Recommended for use in chemical environments, designed for users working with chemicals where cut resistance is required.
Chemical Resistance
-
Gloves are of Type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
-
Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%
-
Liquitech repels oils, liquids and chemicals.
Cut Resistance
- ATG MaxiChem Cut 56-633 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environment with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Specifications
Coating |
Gauntlet - 30 cm |
Length |
30 cm |
Palm Thickness |
1.40 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S)- Size 11 (XXL) |
EN 388:2016+A1:2018 |
4342B |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 10
510JWC56633S10
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXICHEM CUT SAFETY GLOVES CUT LEVEL B, GAUNTLET 30CM, SIZE 10
510JWC56633S10
ATG MaxiChem Cut Safety Gloves Cut Level B, Gauntlet 30cm, Size 10
Application
Recommended for use in chemical environments, designed for users working with chemicals where cut resistance is required.
Chemical Resistance
-
Gloves are of Type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
-
Gloves protect users from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%
-
Liquitech repels oils, liquids and chemicals.
Cut Resistance
- ATG MaxiChem Cut 56-633 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environment with low-to-moderate hazard risk.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user
-
Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.
-
GRIPtech Technology offers a controlled and superior grip in oily and wet applications.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Specifications
Coating |
Gauntlet - 30 cm |
Length |
30 cm |
Palm Thickness |
1.40 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S)- Size 11 (XXL) |
EN 388:2016+A1:2018 |
4342B |
EN ISO 374-1:2016/Type A |
JKLMNO |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXICUT ULTRA CUT-RESISTANT SLEEVES, CUT LEVEL C, SIZE 7
600JWC895745S7
|
|
|
|
ATG
ATG MAXICUT ULTRA CUT-RESISTANT SLEEVES, CUT LEVEL C, SIZE 7
600JWC895745S7
ATG Maxicut Ultra Cut-Resistant Sleeves, Cut Level C, Size 7
Application
Recommended for use in dry environment, perfect companion for ATG cut gloves to offer increased protection for user’s arm.
Cut Resistance
-
ATG MaxiCut Ultra 89-5745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. It reduces hand fatigue and improves comfort through the gloves consistent liner penetration, where only the glove’s soft liner is resting against the user’s skin.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Sleeves - 45 cm |
Length (Size 10) |
45.5 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2016+A1:2018 |
3442C |
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 7
510JWC443745S7
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 7
510JWC443745S7
ATG® Maxicut® Ultra Safety Glove Cut Level C, Knit Wrist Palm Coated, Size 7
Application
Recommended for use in dry environments, with cut risks.
Cut Resistant
-
ATG MaxiCut Ultra 44-3745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand resting position. They also comes with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 11
510JWC443745S11
|
CUT RESISTANT GLOVES (CUT C)
|
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, KNIT WRIST PALM COATED, SIZE 11
510JWC443745S11
ATG® Maxicut® Ultra Safety Glove Cut Level C, Knit Wrist Palm Coated, Size 11
Application
Recommended for use in dry environments, with cut risks.
Cut Resistant
-
ATG MaxiCut Ultra 44-3745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand resting position. They also comes with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm thickness |
1.00 mm |
Silicone free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
About ATG Gloves
ATG delivers a consistent experience across glove families (i.e. AIRtech® for MaxiFlex® and MaxiCut®).
ATG's glove technology platforms center around three pillars – comfort, durability and HandCare™(Cleanliness), which work together to deliver the ideal glove experience for each specific application. ATG® gloves are high in dexterity and it provides the cut-protection you need to get the job done.
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 7
510JWC348743S7
|
CUT RESISTANT GLOVES (CUT B)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX CUT 3 SAFETY GLOVE CUT LEVEL B, KNIT WRIST PALM COATED, SIZE 7
510JWC348743S7
ATG® Maxiflex® Cut 3 Safety Glove Cut Level B, Knit Wrist Palm Coated, Size 7
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
-
ATG MaxiCut 34-8743 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24.5 cm |
Palm Thickness |
0.80 mm |
Silicone Free |
Yes |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2016+A1:2018 |
4331B |
EN 388:2003 |
4331 |
ANSI/ISEA 105 (2016) |
A2 |
CUT RESISTANT GLOVES (CUT B)
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVE CUT LEVEL A, PALM COATED, SIZE 7
510JWC34774BS7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVE CUT LEVEL A, PALM COATED, SIZE 7
510JWC34774BS7
ATG Maxiflex Elite Safety Glove Cut Level A, Palm Coated, Size 7
Application
Recommended for use in dry environments revolving around mechanical work.
Electrostatic Resistance
Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards
- Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)
Cut Resistant
ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length |
22.5 cm |
Palm Thickness |
0.75 mm |
Silicone Free |
Yes |
Sizes |
Size 5 (XXS) - Size 11 (XXL) |
EN 388:2016+A1:2018 |
4121A |
EN ISO 374-1:2016/Type A |
Vertical resistance Rv < 1,0 x 108 Ω |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXICUT ULTRA CUT-RESISTANT SLEEVES, CUT LEVEL C, SIZE 10
600JWC895745S10
|
|
|
|
ATG
ATG MAXICUT ULTRA CUT-RESISTANT SLEEVES, CUT LEVEL C, SIZE 10
600JWC895745S10
ATG Maxicut Ultra Cut-Resistant Sleeves, Cut Level C, Size 10
Application
Recommended for use in dry environment, perfect companion for ATG cut gloves to offer increased protection for user’s arm.
Cut Resistance
-
ATG MaxiCut Ultra 89-5745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. It reduces hand fatigue and improves comfort through the gloves consistent liner penetration, where only the glove’s soft liner is resting against the user’s skin.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
Specifications
Coating |
Sleeves - 45 cm |
Length |
45.5 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S) - Size 10 (XL) |
EN 388:2016+A1:2018 |
3442C |
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL C, KW 3/4 COATED LEATHER PALM, SIZE 9
510JWC34450LPS9
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVE CUT LEVEL C, KW 3/4 COATED LEATHER PALM, SIZE 9
510JWC34450LPS9
ATG Maxicut Oil Safety Glove Cut Level C, KW 3/4 Coated Leather Palm, Size 9
Application
Recommended for use in oily and wet environment with cut-risk.
Heat and Liquid Resistant
Wearing the ATG MaxiCut Oil KW gloves protects you from heat and liquids.
-
Contact heat level 1: Allows you to withstand 100 degrees Celsius for at least 15 seconds.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistance
-
ATG MaxiCut oil KW 344-50 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
24 cm |
Palm Thickness |
2.50 mm |
Silicone Free |
No |
Sizes |
Size 9 (L) |
EN 388:2003 |
4331 |
EN 388:2016 + A1:2018 |
4342B |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, 3/4 COATED KNIT WRIST, SIZE 9
510JWC443455S9
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT ULTRA SAFETY GLOVE CUT LEVEL C, 3/4 COATED KNIT WRIST, SIZE 9
510JWC443455S9
ATG Maxicut Ultra Safety Glove Cut Level C, 3/4 Coated Knit Wrist, Size 9
Application
Recommended for use in dry environments with cut-risk.
Cut Resistant
-
ATG MaxiCut Ultra 44-3455 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.
-
CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.
-
Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.
Specifications
Coating |
3/4 coated knitwrist |
Length (Size 10) |
24.5 cm |
Palm Thickness |
1.10 mm |
Sizes |
Size 6 (XS) - Size 12 (XXXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4542C |
ANSI/ISEA 105 (2016) |
A3 |
CUT RESISTANT GLOVES (CUT C)
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 7
510JWC42874S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 7
510JWC42874S7
ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 7
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
22.5 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 5 (XXS) - Size 12 (XXXL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 11
510JWC42874S11
|
MECHANICAL WORK GLOVES (CUT A)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIFLEX ULTIMATE WITH AD-APT SAFETY GLOVES CUT LEVEL A, KNITWRIST PALM COATED, SIZE 11
510JWC42874S11
ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 11
Application
Recommended for use in dry environment revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
22.5 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 5 (XXS) - Size 12 (XXXL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 11
510JWC34824S11
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ACTIVE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 11
510JWC34824S11
ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 11
Application
Recommended for use in dry environments revolving around mechanical work.
Cut resistant
ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
23 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 5 (XXS) - Size 11 (XXL) |
EN 388:2003 |
4131 |
EN 388:2016 + A1:2018 |
4131A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 7
510JWC56530S7
|
CHEMICAL RESISTANT GLOVES
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIDRY PLUS SAFETY GLOVES CUT LEVEL A, GAUNTLET 30CM, SIZE 7
510JWC56530S7
ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 7
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.
-
Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Specifications
Coating |
Gauntlet - 30 cm |
Length (Size 10) |
30 cm |
Palm Thickness |
1.10 mm |
Silicone Free |
Yes |
Sizes |
Size 7 (S) - Size 11 (XXL) |
EN 388:2016 + A1:2018 |
4121A |
EN ISO 374-1:2016/Type B |
JKL |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 7
510JWC56426S7
|
CHEMICAL RESISTANT GLOVES
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 7
510JWC56426S7
ATG MaxiDry Safety Gloves Cut Level A, Gauntlet 26 cm, Size 7
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Specifications
Coating |
Gauntlet - 26 cm |
Length (Size 10) |
26 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 6 (XS) - Size 11 (XXL) |
EN 388:2016 + A1:2018 |
4111A |
EN ISO 374-1:2016/Type C |
Yes |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 7
510JWC34274S7
|
MECHANICAL WORK GLOVES (CUT A)
|
|
|
ATG
ATG MAXIFLEX ELITE SAFETY GLOVES CUT LEVEL A, PALM COATED KNITWRIST, SIZE 7
510JWC34274S7
ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist, Size 7
Application
Recommended for use in dry environments revolving around mechanical work.
Cut Resistant
ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.
High Dexterity, Comfort & Grip
-
ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.
-
Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.
-
360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.
-
Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for Cleaning
- Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Specifications
Coating |
Palm coated knitwrist |
Length (Size 10) |
23 cm |
Palm Thickness |
0.80 mm |
Silicone Free |
Yes |
Sizes |
Size 6 (XS) - Size 11 (XXL) |
EN 388:2003 |
4121 |
EN 388:2016 + A1:2018 |
4121A |
MECHANICAL WORK GLOVES (CUT A)
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 8
510JWC56451S8
|
|
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 8
510JWC56451S8
ATG Maxidry Zero Safety Gloves Cut Level B, Fully Coated, Size 8
Application
Recommended for use in cold and wet environment, can be used for temperatures down to -10 degree Celsius. Gloves can also be used for food processing and handling.
Heat and Cold Resistant
Wearing ATG MaxiDry Zero gloves protects you from contact heat and cold.
- Contact heat level 1: Allows you to withstand 100 degrees Celsius for at least 15 seconds.
- Protection against contact cold level 2.
Liquid Resistant
Wearing the ATG MaxiDry Zero gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals.
Cut Resistant
- ATG MaxiDry Zero 56-451 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort and Grip
-
Super soft and flexible coating – Provides user ultimate flexibility in extremely cold environment.
-
Connected with care – Insulation liner in gloves is bonded away from the user’s hand to ensure ultimate comfort.
-
GRIPtech technology ensures user maximum flex and contact through the glove’s ultra-soft coating thus decreasing hand fatigue.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.
Specifications
Coating |
Fully coated knitwrist |
Length (Size 10) |
28 cm |
Palm Thickness |
2.00 mm |
Silicone Free |
- |
Sizes |
Size 7 (S) - Size 11 (XXL) |
EN 388:2003 |
4232 |
EN 511:2006 |
021 |
EN 407:2004 |
X1XXXX |
EN 388:2016 + A1:2018 |
4232B |
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 9
510JWC56451S9
|
|
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 9
510JWC56451S9
ATG Maxidry Zero Safety Gloves Cut Level B, Fully Coated, Size 9
Application
Recommended for use in cold and wet environment, can be used for temperatures down to -10 degree Celsius. Gloves can also be used for food processing and handling.
Heat and Cold Resistant
Wearing ATG MaxiDry Zero gloves protects you from contact heat and cold.
- Contact heat level 1: Allows you to withstand 100 degrees Celsius for at least 15 seconds.
- Protection against contact cold level 2.
Liquid Resistant
Wearing the ATG MaxiDry Zero gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals.
Cut Resistant
- ATG MaxiDry Zero 56-451 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort and Grip
-
Super soft and flexible coating – Provides user ultimate flexibility in extremely cold environment.
-
Connected with care – Insulation liner in gloves is bonded away from the user’s hand to ensure ultimate comfort.
-
GRIPtech technology ensures user maximum flex and contact through the glove’s ultra-soft coating thus decreasing hand fatigue.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.
Specifications
Coating |
Fully coated knitwrist |
Length (Size 10) |
28 cm |
Palm Thickness |
2.00 mm |
Silicone Free |
- |
Sizes |
Size 7 (S) - Size 11 (XXL) |
EN 388:2003 |
4232 |
EN 511:2006 |
021 |
EN 407:2004 |
X1XXXX |
EN 388:2016 + A1:2018 |
4232B |
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 10
510JWC56451S10
|
|
|
|
ATG
ATG MAXIDRY ZERO SAFETY GLOVES CUT LEVEL B, FULLY COATED, SIZE 10
510JWC56451S10
ATG Maxidry Zero Safety Gloves Cut Level B, Fully Coated, Size 10
Application
Recommended for use in cold and wet environment, can be used for temperatures down to -10 degree Celsius. Gloves can also be used for food processing and handling.
Heat and Cold Resistant
Wearing ATG MaxiDry Zero gloves protects you from contact heat and cold.
- Contact heat level 1: Allows you to withstand 100 degrees Celsius for at least 15 seconds.
- Protection against contact cold level 2.
Liquid Resistant
Wearing the ATG MaxiDry Zero gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals.
Cut Resistant
- ATG MaxiDry Zero 56-451 is of Cut level B. It offers a moderate level of cut protection against straight blades. Ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort and Grip
-
Super soft and flexible coating – Provides user ultimate flexibility in extremely cold environment.
-
Connected with care – Insulation liner in gloves is bonded away from the user’s hand to ensure ultimate comfort.
-
GRIPtech technology ensures user maximum flex and contact through the glove’s ultra-soft coating thus decreasing hand fatigue.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.
Specifications
Coating |
Fully coated knitwrist |
Length (Size 10) |
28 cm |
Palm Thickness |
2.00 mm |
Silicone Free |
- |
Sizes |
Size 7 (S) - Size 11 (XXL) |
EN 388:2003 |
4232 |
EN 511:2006 |
021 |
EN 407:2004 |
X1XXXX |
EN 388:2016 + A1:2018 |
4232B |
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 11
510JWC56426S11
|
CHEMICAL RESISTANT GLOVES
|
|
|
ATG
ATG MAXIDRY SAFETY GLOVES CUT LEVEL A, GAUNTLET 26 CM, SIZE 11
510JWC56426S11
ATG MaxiDry Safety Gloves Cut Level A, Gauntlet 26 cm, Size 11
Application
Recommended for use in oily or wet conditions, Gloves are also liquid-proof.
Chemical Resistant and Liquid Resistant
Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.
-
Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.
-
Liquitech repels oils, liquids and chemicals.
Cut Resistant
ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
High Dexterity, Comfort and Grip
-
ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides the excellent comfort, sensitivity and dexterity to the user.
-
Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.
-
GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.
Cleanliness Guaranteed
-
Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.
-
ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.
Specifications
Coating |
Gauntlet - 26 cm |
Length (Size 10) |
26 cm |
Palm Thickness |
1.00 mm |
Silicone Free |
Yes |
Sizes |
Size 6 (XS) - Size 11 (XXL) |
EN 388:2016 + A1:2018 |
4111A |
EN ISO 374-1:2016/Type C |
Yes |
CHEMICAL RESISTANT GLOVES
|
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 6
510JWC30202S6
|
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXITHERM SAFETY GLOVES CUT LEVEL B, KNITWRIST 3/4 COATED, SIZE 6
510JWC30202S6
ATG MaxiTherm Safety Gloves Cut Level B, Knitwrist 3/4 Coated, Size6
Application
ATG’s MaxiTherm gloves regulate your hand temperature, keeping you comfortable in warm and cool environments. Its thermal resistance makes it especially well-suited for work involving high temperatures.
Heat and Cold Resistant
ATG MaxiTherm gloves protect you from contact heat and cold.
- Contact heat level 2: Allows you to withstand 250 degrees Celsius for at least 15 seconds
- Contact cold level 1
Cut Resistant
ATG MaxiTherm 30-202 is of Cut level B. It offers moderate cut protection against straight blades, ideal to use in environments with low-to-moderate hazard risk.
High Dexterity, Comfort, and Grip
-
ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
-
Flat Dipping technology helps to improve breathability and reduces perspiration within the glove, making it more comfortable to wear.
- The non-slip latex grip coating also enhances the user’s grip even in wet conditions.
Cleanliness Guaranteed
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.
Specifications
Coating |
3/4 coated knitwrist |
Length (Size 10) |
26 cm |
Palm thickness |
2.50 mm |
Silicone free |
No |
Sizes |
Size 6 (XS) - Size 11 (XXL) |
EN 388:2003 |
1241 |
EN 511:2006 |
X1X |
EN 407:2004 |
X2XXXX |
EN 388:2016 + A1:2018 |
1241B |
|
|
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 11
510JWC34504S11
|
CUT RESISTANT GLOVES (CUT C)
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
TEMPORARILY OUT OF STOCK
SG 0 PAIR
|
ATG
ATG MAXICUT OIL SAFETY GLOVES CUT LEVEL C, KNITWRIST PALM COATED, SIZE 11
510JWC34504S11
ATG MaxiCut Oil Safety Gloves Cut Level C, Knitwrist Palm Coated, Size 11
Application
Recommended for use in oily and wet environment with cut hazards.
Liquid Resistant
Wearing the ATG MaxiCut Oil gloves protects you from liquids.
- LIQUItech repels oils, liquids and chemicals
Cut Resistant
- ATG MaxiCut 34-504 is of Cut level C. Gloves are designed to protect against medium level cut hazards.
- CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and finres present throughout the gloves.
- Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.
High Dexterity, Comfort and Grip
- ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.
- ERGOtech knitting technology improves fingertip sensitivity for dextrous work.
- GRIPtech Technology offers an optimized and controlled grip to the user through the glove's micro-cup finish.
Cleanliness Guaranteed
- Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.
- ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”
Directions for cleaning
- Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled
Coating |
Palm coated knitwrist |
Length |
25 cm |
Palm thickness |
1.30 mm |
Silicone free |
No |
Size |
Size 11 (XXL) |
EN 388:2003 |
4542 |
EN 388:2016 + A1:2018 |
4443C |
CUT RESISTANT GLOVES (CUT C)
|