ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 9

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 8

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

WORKSafe® RUBBER PALM-COATED GLOVES-G1412AE

Ergonomic design adds more comfort, enables prolonged usage and avoids hand fatigue. Natural rubber palm with wrinkled-finish ensures a secure grip for handling slippery or abrasive objects. Natural rubber inhibits liquid penetration. Available in heavy duty versions.

Suitable for:

• Building and construction
• Shipping and transportation
• Deep-sea fishing
• Quarrying
• Gardening
• Glass handling

PRODUCT CODE

510WSWG1412AES10

Wrinkled-finish Orange Latex

Palm-dipped Gloves,

Cotton/Polyester Shell

Size (X): 10

10prs/bag, 12 bags/case

EN388 : 2243

ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 10

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

WORKSafe® SOLVOTRIL NITRILE GLOVES, JERSEY COTTON (KNIT-WRIST) -GN186

A robust NBR supported safety glove with exceptional abrasion, cut and tear resistance. Available with knit-wrist protection. Tough yet flexible, these gloves are ideal for manual tasks involving raw materials.

• Metal processing
• Machine construction
• Woodworking
• Transport industry
• Building and construction

PRODUCT CODE

510WSWGN186S9

Fully Coated Nitrile Gloves, Jersey

Cotton, Knit-wrist

Size (X): 9

12prs/bag, 10 bags/case

EN388:4221

WORKSafe® NITRILE FOAM SEAMLESS NYLON LINER GLOVES-GNF1001

Nitrile palm foam-coated gloves to provide excellent grip in oily condition with excellent abrasion-resistance. Seamless nylon liner gives an excellent fit and maximum dexterity.

• Automotive industries
• Packing and inspection
• Component assembly

PRODUCT CODE

510WSWGNF1001S9

Nitrile Foam Seamless Gloves,

Palm-coated, Nylon Liner

Size (X): 9

12prs/bag, 10 bags/case

EN388 – 4121

ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 7

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Specifications

WORKSafe® NITRILE MICRO-FOAM SEAMLESS DOTTED NYLON LINER GLOVES-GND900

These gloves are enhanced with raised PU dots to increase durability and provides extra cushioning in repetitive applications. Highly breathable with superior dexterity, this glove provides a perfect fit for precision handling in dry environments. The nitrile micro-foam coating gives the glove an excellent grip and abrasion resistance. Soft and seamless nylon liner adds more comfort, reduces hand fatigue and improves fingertip sensitivity.

• Logistics and warehousing
• Packing and inspection
• Small components assembly
• Maintenance

PRODUCT CODE

510WSWGND900SX

Nitrile Micro-foam Seamless Gloves,

PU Flat Dots, Palm-coated, Nylon Liner

Size (X): 8

EN388 : 4121

WORKSafe® NITRILE FOAM SEAMLESS NYLON LINER GLOVES-GNF1001

Nitrile palm foam-coated gloves to provide excellent grip in oily condition with excellent abrasion-resistance. Seamless nylon liner gives an excellent fit and maximum dexterity.

• Automotive industries
• Packing and inspection
• Component assembly

PRODUCT CODE

510WSWGNF1001S8

Nitrile Foam Seamless Gloves,

Palm-coated, Nylon Liner

Size (X):8

12prs/bag, 10 bags/case

EN388 – 4121

WORKSafe® SOLVOTRIL NITRILE GLOVES, JERSEY COTTON-GN196 (SAFETY CUFF)

A robust NBR supported safety glove with exceptional abrasion, cut and tear resistance. Available with safety cuff wrist protection. Tough yet flexible, these gloves are ideal for manual tasks involving raw materials.

• Metal processing
• Machine construction
• Woodwork
• Transport industry
• Building and construction

PRODUCT CODE

510WSWGN196S9

Fully Coated Nitrile Gloves, Jersey

Cotton, Safety Cuff

Size: 9

12prs/bag, 10 bags/case

EN388: 4111

WORKSafe® RUBBER PALM-COATED GLOVES-G1412AE

Ergonomic design adds more comfort, enables prolonged usage and avoids hand fatigue. Natural rubber palm with wrinkled-finish ensures a secure grip for handling slippery or abrasive objects. Natural rubber inhibits liquid penetration. Available in heavy duty versions.

Suitable for:

• Building and construction
• Shipping and transportation
• Deep-sea fishing
• Quarrying
• Gardening
• Glass handling

PRODUCT CODE

510WSWG1412AES9

Wrinkled-finish Orange Latex

Palm-dipped Gloves,

Cotton/Polyester Shell

Size (X): 9/p>

10prs/bag, 12 bags/case

EN388 : 2243

WORKSafe® HPPE/PU CUT-RESISTANT GLOVES-GPU2003

This glove features a seamless, cut-resistant High Performance Polyethylene (HPPE) shell with a polyurethane palm coat. The gloves are extremely light and comfortable, and provide superior dexterity as well as excellent cut and abrasion resistance.

Suitable for:

• Plant maintenance
• Packaging
• Metal sheets & glass handling
• Automotive industries

PRODUCT CODE

500WSWGPU2003S7

HPPE gloves, Polyurethane

palm-coat, 13 gauge, Cut Level 3

Size (X): 7

12prs/bag, 10 bags/case

WORKSafe® SOLVOTRIL NITRILE GLOVES, JERSEY COTTON (KNIT-WRIST) -GN186

A robust NBR supported safety glove with exceptional abrasion, cut and tear resistance. Available with knit-wrist protection. Tough yet flexible, these gloves are ideal for manual tasks involving raw materials.

• Metal processing
• Machine construction
• Woodworking
• Transport industry
• Building and construction

PRODUCT CODE

510WSWGN186S10

Fully Coated Nitrile Gloves, Jersey

Cotton, Knit-wrist

Size (X): 10

12prs/bag, 10 bags/case

EN388:4221

ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated,  24CM Grey, Size 9

Application

Recommended for general purpose handling in dirty condition.

Cut Resistant

ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• Glove’s light coating improves flexibility and dexterity.

• Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.

• Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.

• Grips well in both wet and dry environment.

Cleanliness Guaranteed 

• Dermatologically accredited and certified by Oeko-Tex which indicates this glove is skin friendly.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated,  24CM Grey, Size 8

Application

Recommended for general purpose handling in dirty condition.

Cut Resistant

ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• Glove’s light coating improves flexibility and dexterity.

• Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.

• Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.

• Grips well in both wet and dry environment.

Cleanliness Guaranteed 

• Dermatologically accredited and certified by Oeko-Tex which indicates this glove is skin friendly.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

WORKSafe® HPPE/PU CUT-RESISTANT GLOVES-GPU2003

This glove features a seamless, cut-resistant High Performance Polyethylene (HPPE) shell with a polyurethane palm coat. The gloves are extremely light and comfortable, and provide superior dexterity as well as excellent cut and abrasion resistance.

Suitable for:

• Plant maintenance
• Packaging
• Metal sheets & glass handling
• Automotive industries

PRODUCT CODE

500WSWGPU2003S8

HPPE gloves, Polyurethane

palm-coat, 13 gauge, Cut Level 3

Size (X): 8

12prs/bag, 10 bags/case

ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist, Size 9

Application

Recommended for use in dry environments revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.

High Dexterity, Comfort & Grip

• ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.

• Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for Cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.

ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 9

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant 

ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• EROtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 10

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant 

ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• EROtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG® MAXIDRY® SAFETY GLOVE, GAUNTLET 26 CM, SIZE 10

Application 

Recommended for use in oily or wet conditions, Gloves are also liquid-proof.

Chemical Resistant and Liquid Resistant

Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.

• Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.

• Liquitech repels oils, liquids and chemicals.

Cut Resistant

ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG Maxiflex Elite Cut Level A, Palm Coated Knitwrist, Size 8

Application

Recommended for use in dry environments revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Elite 34-274 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for work involving blades.

High Dexterity, Comfort & Grip

• ERGOTech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.

• Ultra light-weight liner - Maximises fingertip sensitivity and reduces hand fatigue for improved dexterity and comfort.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• Optimized grip – Micro-cup finish enhances user’s grip. GRIPtech technology helps to decrease hand fatigue.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”,SVHC is also not used during the manufacturing process.
• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for Cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse when gloves are heavily soiled.

ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 8

Application 

Recommended for use in dry environments revolving around mechanical work.

Cut resistant

ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy

ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 8

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant 

ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• EROtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Mechanix M-pact 4X Safety Gloves, Size 10

Application

Recommended for use in Material Handling, Construction, Railroad works, Woodworking, Maintenance & Repair, Heavy Equipment operation, Towing & Transportation and DIY home improvement.

Cut Resistance

• Mechanix M-pact 4X is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix M-pact 4X is of performance level 4. Gloves are designed to go through at least 8000 resistance cycle.

Tearing Strength

• Mechanix M-pact 4X is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Patented Impact Guard with EVA foam padding helps protect the first knuckle

• TPR (Thermoplastic rubber) knuckle guards and full-length fingertip protection reduces impact and pinching injuries risk

• TrekDry technology keeps user’s hand cool and comfortable

• TPR (Thermoplastic Rubber) closure provides secure fit to user’s wrist

• Armortex palm reinforcement panel

• Material4X reinforcement provides added internal fingertip durability

• Embossed and textured index finger and thumb provides grip

• D30 palm padding helps to absorb and disperse high-impact energy

• Material4X synthetic leather has greater abrasion and tear resistance compared to standard synthetic gloves

Specification 

WORKSafe® NITRILE MICRO-FOAM SEAMLESS NYLON LINER GLOVES-GN800

Highly breathable gloves with superior dexterity, it provides a perfect fit for precision handling in dry environments. Nitrile micro-foam palm coating gives the glove an excellent grip and abrasion resistance. Soft and seamless nylon liner adds more comfort, reduces hand fatigue and improves fingertip sensitivity.

• Logistics and warehousing
• Packing and inspection
• Small components assembly
• Maintenance

PRODUCT CODE

510WSWGN800S11

Nitrile Micro-foam Seamless Gloves,

Palm-coated, Nylon Liner

Size (X): 11

EN388 – 4121

ATG MaxiDry Safety Gloves Cut Level A, Gauntlet 26 cm, Size  9

Application 

Recommended for use in oily or wet conditions, Gloves are also liquid-proof.

Chemical Resistant and Liquid Resistant

Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.

• Gloves are of Type C (Level 1) which protects the user against 1 test chemical for 10 minutes.

• Liquitech repels oils, liquids and chemicals.

Cut Resistant

ATG MaxiDry 56-426 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiFlex Endurance Drivers Style Safety Gloves Cut Level A, Size 7

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant 

ATG MaxiFlex Endurance 34-847 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• EROtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated,  24CM Grey, Size 7

Application

Recommended for general purpose handling in dirty condition.

Cut Resistant

ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• Glove’s light coating improves flexibility and dexterity.

• Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.

• Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.

• Grips well in both wet and dry environment.

Cleanliness Guaranteed 

• Dermatologically accredited and certified by Oeko-Tex which indicates this glove is skin friendly.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 11

Application 

Recommended for use in dry environments revolving around mechanical work.

Cut resistant

ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy

Specifications

ATG MaxiFlex Active Safety Gloves Cut Level A, Palm Coated Knitwrist, Size 7

Application 

Recommended for use in dry environments revolving around mechanical work.

Cut resistant

ATG MaxiFlex Active 34-824 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy

ATG MaxiFoam Safety Gloves Cut Level A, Knitwrist Finger Coated,  24CM Grey, Size 10

Application

Recommended for general purpose handling in dirty condition.

Cut Resistant

ATG MaxiFlex Elite 34-800 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• Glove’s light coating improves flexibility and dexterity.

• Minimal Strikethrough throughout the gloves reduces irritation and increase comfort level for the user.

• Surface of the glove designed to ‘repel’ oil away to give a better grip for the user.

• Grips well in both wet and dry environment.

Cleanliness Guaranteed 

• Dermatologically accredited and certified by Oeko-Tex which indicates this glove is skin friendly.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 10 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG Maxiflex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 7

Application 

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG Maxiflex Elite Safety Glove Cut Level A, Palm Coated, Size 7

Application 

Recommended for use in dry environments revolving around mechanical work.

Electrostatic Resistance 

Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards

• Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)

Cut Resistant

ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

•  Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Specifications

ATG MaxiFlex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 10

Application 

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFlex Ultimate Safety Gloves Cut Level A, Knitwrist 3/4 Palm Coated, Size 8

Application 

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

ATG MaxiFlex Ultimate Safety Gloves Cut Level A , Knitwrist Finger Coated 25 cm Grey, Size

Application 

Recommended for use in dry environment revolving around mechanical work. Gloves also can be used for food processing and handling.

Cut Resistant

ATG MaxiFlex Ultimate 34-875 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOTech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Mechanix M-pact 4X Safety Gloves, Size 9

Application

Recommended for use in Material Handling, Construction, Railroad works, Woodworking, Maintenance & Repair, Heavy Equipment operation, Towing & Transportation and DIY home improvement.

Cut Resistance

• Mechanix M-pact 4X is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix M-pact 4X is of performance level 4. Gloves are designed to go through at least 8000 resistance cycle.

Tearing Strength

• Mechanix M-pact 4X is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Patented Impact Guard with EVA foam padding helps protect the first knuckle

• TPR (Thermoplastic rubber) knuckle guards and full-length fingertip protection reduces impact and pinching injuries risk

• TrekDry technology keeps user’s hand cool and comfortable

• TPR (Thermoplastic Rubber) closure provides secure fit to user’s wrist

• Armortex palm reinforcement panel

• Material4X reinforcement provides added internal fingertip durability

• Embossed and textured index finger and thumb provides grip

• D30 palm padding helps to absorb and disperse high-impact energy

• Material4X synthetic leather has greater abrasion and tear resistance compared to standard synthetic gloves

Specification 

Mechanix Specialty Safety Gloves, 0.5mm High Dexterity, Size 8

Application

Recommended for use in Automotive works, Maintenance & Repair, Electrical work, Assembly and Manufacturing.

Cut Resistance

• Mechanix Specialty is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Specialty is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Specialty is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• TPR (Thermoplastic rubber) closure provides secure fit to user’s wrist

• Form-fitting TrekDry technology keeps user’s hand cool and comfortable

• Three-dimensional patterning forms to the natural curvature of the hand

• Flex inserts improve finger mobility

• High-dexterity 0.5mm AX-Suede palm material provide user precision feel

• Hourglass finger design eliminates material overlap

Specification 

WORKSafe® NITRILE MICRO-FOAM SEAMLESS NYLON LINER GLOVES-GN800

Highly breathable gloves with superior dexterity, it provides a perfect fit for precision handling in dry environments. Nitrile micro-foam palm coating gives the glove an excellent grip and abrasion resistance. Soft and seamless nylon liner adds more comfort, reduces hand fatigue and improves fingertip sensitivity.

• Logistics and warehousing
• Packing and inspection
• Small components assembly
• Maintenance

PRODUCT CODE

510WSWGN800S10

Nitrile Micro-foam Seamless Gloves,

Palm-coated, Nylon Liner

Size (X): 10

EN388 – 4121

Mechanix Specialty Safety Gloves, 0.5mm High Dexterity, Size 10

Application

Recommended for use in Automotive works, Maintenance & Repair, Electrical work, Assembly and Manufacturing.

Cut Resistance

• Mechanix Specialty is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Specialty is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Specialty is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• TPR (Thermoplastic rubber) closure provides secure fit to user’s wrist

• Form-fitting TrekDry technology keeps user’s hand cool and comfortable

• Three-dimensional patterning forms to the natural curvature of the hand

• Flex inserts improve finger mobility

• High-dexterity 0.5mm AX-Suede palm material provide user precision feel

• Hourglass finger design eliminates material overlap

Specification 

Mechanix M-pact 4X Safety Gloves, Size 11

Application

Recommended for use in Material Handling, Construction, Railroad works, Woodworking, Maintenance & Repair, Heavy Equipment operation, Towing & Transportation and DIY home improvement.

Cut Resistance

• Mechanix M-pact 4X is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix M-pact 4X is of performance level 4. Gloves are designed to go through at least 8000 resistance cycle.

Tearing Strength

• Mechanix M-pact 4X is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Patented Impact Guard with EVA foam padding helps protect the first knuckle

• TPR (Thermoplastic rubber) knuckle guards and full-length fingertip protection reduces impact and pinching injuries risk

• TrekDry technology keeps user’s hand cool and comfortable

• TPR (Thermoplastic Rubber) closure provides secure fit to user’s wrist

• Armortex palm reinforcement panel

• Material4X reinforcement provides added internal fingertip durability

• Embossed and textured index finger and thumb provides grip

• D30 palm padding helps to absorb and disperse high-impact energy

• Material4X synthetic leather has greater abrasion and tear resistance compared to standard synthetic gloves

Specification 

Mechanix Specialty Safety Gloves, 0.5mm High Dexterity, Size 9

Application

Recommended for use in Automotive works, Maintenance & Repair, Electrical work, Assembly and Manufacturing.

Cut Resistance

• Mechanix Specialty is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Specialty is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Specialty is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• TPR (Thermoplastic rubber) closure provides secure fit to user’s wrist

• Form-fitting TrekDry technology keeps user’s hand cool and comfortable

• Three-dimensional patterning forms to the natural curvature of the hand

• Flex inserts improve finger mobility

• High-dexterity 0.5mm AX-Suede palm material provide user precision feel

• Hourglass finger design eliminates material overlap

Specification 

Mechanix Speciality 0.5mm Covert Safety Gloves, Size 8

Application

Recommended for use in Shooting sports, Law enforcement and Military.

Cut Resistance

• Mechanix Speciality 0.5mm Covert is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Speciality 0.5mm Covert is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Speciality 0.5mm Covert is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Low-profile Thermoplastic Rubber (TPR) closure provides a secure fit to user’s wrist

• Lightweight TrekDry technology helps to reduce heat build-up and perspiration from the user’s back of hand

• Anatomical stich darts conforms to the natural curvature of user’s hand to create a precision fit

• Expandable flex joints to improve trigger finger mobility

• 0.5mm AX-Suede provides precision feel and high dexterity

• Nylon carrier loops for easy storage

Specification 

Mechanix Speciality 0.5mm Covert Safety Gloves, Size 9

Application

Recommended for use in Shooting sports, Law enforcement and Military.

Cut Resistance

• Mechanix Speciality 0.5mm Covert is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Speciality 0.5mm Covert is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Speciality 0.5mm Covert is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Low-profile Thermoplastic Rubber (TPR) closure provides a secure fit to user’s wrist

• Lightweight TrekDry technology helps to reduce heat build-up and perspiration from the user’s back of hand

• Anatomical stich darts conforms to the natural curvature of user’s hand to create a precision fit

• Expandable flex joints to improve trigger finger mobility

• 0.5mm AX-Suede provides precision feel and high dexterity

• Nylon carrier loops for easy storage

Specification 

ATG Maxiflex Ultimate With AD-APT Safety Gloves Cut Level A, Knitwrist Palm Coated, Size 11

Application

Recommended for use in dry environment revolving around mechanical work.

Cut Resistant

ATG MaxiFlex Ultimate 42-874 is of Cut level A. Gloves are designed to protect against light scratches only. Not suitable for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech enables Maxiflex Active gloves to be 25% thinner than traditional foam nitrile gloves.

• ATG gloves are designed based on a hand resting position. They also come with a liner that reduces hand fatigue and improves comfort.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• AD-APT technology keeps your hand dry and cooler within the glove, it’s designed to last for the duration

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature

• GRIPtech Technology offers a optimized and controlled grip to the user through the glove’s micro-cup finish

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”

Directions for cleaning

• Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Specifications

Mechanix Speciality 0.5mm Covert Safety Gloves, Size 10

Application

Recommended for use in Shooting sports, Law enforcement and Military.

Cut Resistance

• Mechanix Speciality 0.5mm Covert is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Speciality 0.5mm Covert is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Speciality 0.5mm Covert is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Low-profile Thermoplastic Rubber (TPR) closure provides a secure fit to user’s wrist

• Lightweight TrekDry technology helps to reduce heat build-up and perspiration from the user’s back of hand

• Anatomical stich darts conforms to the natural curvature of user’s hand to create a precision fit

• Expandable flex joints to improve trigger finger mobility

• 0.5mm AX-Suede provides precision feel and high dexterity

• Nylon carrier loops for easy storage

Specification 

WORKSafe® SOLVOTRIL NITRILE GLOVES, JERSEY COTTON-GN196 (SAFETY CUFF)

A robust NBR supported safety glove with exceptional abrasion, cut and tear resistance. Available with safety cuff wrist protection. Tough yet flexible, these gloves are ideal for manual tasks involving raw materials.

• Metal processing
• Machine construction
• Woodwork
• Transport industry
• Building and construction

PRODUCT CODE

510WSWGN196S10

Fully Coated Nitrile Gloves, Jersey

Cotton, Safety Cuff

Size: 10

12prs/bag, 10 bags/case

EN388: 4111

WORKSafe® NITRILE MICRO-FOAM SEAMLESS NYLON LINER GLOVES-GN800

Highly breathable gloves with superior dexterity, it provides a perfect fit for precision handling in dry environments. Nitrile micro-foam palm coating gives the glove an excellent grip and abrasion resistance. Soft and seamless nylon liner adds more comfort, reduces hand fatigue and improves fingertip sensitivity.

• Logistics and warehousing
• Packing and inspection
• Small components assembly
• Maintenance

PRODUCT CODE

510WSWGN800S7

Nitrile Micro-foam Seamless Gloves,

Palm-coated, Nylon Liner

Size (X): 7

EN388 – 4121

Mechanix Speciality 0.5mm Covert Safety Gloves, Size 11

Application

Recommended for use in Shooting sports, Law enforcement and Military.

Cut Resistance

• Mechanix Speciality 0.5mm Covert is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix Speciality 0.5mm Covert is of performance level 1. Gloves are designed to go through at least 100 resistance cycle.

Tearing Strength

• Mechanix Speciality 0.5mm Covert is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Low-profile Thermoplastic Rubber (TPR) closure provides a secure fit to user’s wrist

• Lightweight TrekDry technology helps to reduce heat build-up and perspiration from the user’s back of hand

• Anatomical stich darts conforms to the natural curvature of user’s hand to create a precision fit

• Expandable flex joints to improve trigger finger mobility

• 0.5mm AX-Suede provides precision feel and high dexterity

• Nylon carrier loops for easy storage

Specification 

Mechanix M-pact 4X Safety Gloves, Size 8

Application

Recommended for use in Material Handling, Construction, Railroad works, Woodworking, Maintenance & Repair, Heavy Equipment operation, Towing & Transportation and DIY home improvement.

Cut Resistance

• Mechanix M-pact 4X is of cut level 1. Gloves are designed to protect against light scratches only. (Cannot be protected against actual blades)

Abrasion Resistance

• Mechanix M-pact 4X is of performance level 4. Gloves are designed to go through at least 8000 resistance cycle.

Tearing Strength

• Mechanix M-pact 4X is of performance level 2. Gloves are designed to withstand at least 25 Newtons.

Features

• Patented Impact Guard with EVA foam padding helps protect the first knuckle

• TPR (Thermoplastic rubber) knuckle guards and full-length fingertip protection reduces impact and pinching injuries risk

• TrekDry technology keeps user’s hand cool and comfortable

• TPR (Thermoplastic Rubber) closure provides secure fit to user’s wrist

• Armortex palm reinforcement panel

• Material4X reinforcement provides added internal fingertip durability

• Embossed and textured index finger and thumb provides grip

• D30 palm padding helps to absorb and disperse high-impact energy

• Material4X synthetic leather has greater abrasion and tear resistance compared to standard synthetic gloves

Specification