GMI Filter Cover

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No: 64084

GMI Hydrophobic Filter

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No: 64254

GMI Filter Cover

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No: 64240

GMI PS200 Dual Tox

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No : 64067

GMI In Line Hydrophobic Filter Assembly

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No: 66485

GMI PS200 Lel Sensor

PS200 Series detects all possible combinations of LEL, O2, CO, H2S, including single gas detection. In addition to displaying all gas readings simultaneously, the user can also initiate a manual bump test anytime.

Part No: 64825

GMI Sample Line Connector For PS241

The in-line hydrophobic filter assembly consists of the filter and a luer fitting on one side of the filter and a push-fit
connection on the other, and is available as an accessory (Part No. 66485).

Part No: 66045

Gmi Smart Sensor, Voc2: 0-1,000 Ppm

The GMI PS500 by Teledyne detects up to five gases accepting electrochemical, catalytic, PID and infrared sensors. There is a choice of 20 plug and play sensors which can be swapped providing maximum versatility. Four sensors can be installed; five gas monitoring capability is only possible with a dual toxic CO/H2S sensor fitted. For VOC detection there is a choice of two photo ionisation sensors, and IR sensors are available for combustible and CO2 gases.

Easy two-button operation, supplied with a high impact rubber case, small, lightweight and portable. Equipped with a 95db audible alarm and visual 360°C light bar alarm.

Diffusion or pumped models are available for pre-entry checks or remote sampling, up to a maximum of 30 metres. The pumped can be switched off when not required preserving battery life. Datalogging is included for eight calibration logs, gas values, event and summary logs, for later download.

Used for confined space work such as sewage, underground pipes or tank work.PS500 monitor supplied with: High impact rubberised polycarbonate case, CD-ROM, belt clip, configuration report and calibration certificate. Pumped instruments include 3 metres of Tygon tubing.

Specifications

• Multi-gas up to 5 gases
• Smart sensors – interchangeable
• Rugged
  • Typical battery life 12 hours pumped
  • Operating temperature: -20°C to +50°C
  • Ingress protection IP 65
  • LCD backlight display
  • Single gas CO2 version available part: 61371P
  • Datalogging timed: 24 hours of timed logs at 1 log per minute. Session: Minimum of 180 logs
  • Up to 4 alarms per toxic gas (including STEL/TWA calculations), 3 alarms for O2 & 2 alarms for LEL
  • Approvals ATEX, UL, and MED
  • Two-year standard warranty
  • Size: 140 x 85 x 45mm, weight 0.4kg

Gmi Gas Sensor A - Lel Enhanced Filter

The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors and infrared capabilities. ‘Plug and Play’ option allows the customer to ‘plug in’ a new board with a different gas range.

The PS500 is particularly useful in noisy environments, featuring a very loud (95dBA) penetrating and distinctive audible alarm together with high visibility large area visual alarm. Pump, diffusion or both together, allowing pumped sample for pre-entry checking and diffusion in confined space working, thus maximising battery life. A robust, moulded, rubberised casing guaranteeing Hi-Impact resistance, the PS500 can be used in the most demanding environments.

Key Features

• Over 15 plug-and-play smart sensors to choose from
• Wide range of VOC’s with 2 different PID sensors
• Flexible configuration to suit your specification
• Piercing 95 dB audible plus 360-degree high visibility light bar
• On-board datalogging for calibration certificates, data management and event logging
• High impact rubberised case
• IP65
• Low cost of ownership

Gmi Sensor Pid (Voc2:0-1,000 Ppm)

The GMI PS500 by Teledyne detects up to five gases accepting electrochemical, catalytic, PID and infrared sensors. There is a choice of 20 plug and play sensors which can be swapped providing maximum versatility. Four sensors can be installed; five gas monitoring capability is only possible with a dual toxic CO/H2S sensor fitted. For VOC detection there is a choice of two photo ionisation sensors, and IR sensors are available for combustible and CO2 gases.

Easy two-button operation, supplied with a high impact rubber case, small, lightweight and portable. Equipped with a 95db audible alarm and visual 360°C light bar alarm.

Diffusion or pumped models are available for pre-entry checks or remote sampling, up to a maximum of 30 metres. The pumped can be switched off when not required preserving battery life. Datalogging is included for eight calibration logs, gas values, event and summary logs, for later download.

Used for confined space work such as sewage, underground pipes or tank work.PS500 monitor supplied with: High impact rubberised polycarbonate case, CD-ROM, belt clip, configuration report and calibration certificate. Pumped instruments include 3 metres of Tygon tubing.

Specifications

• Multi-gas up to 5 gases
• Smart sensors – interchangeable
• Rugged
  • Typical battery life 12 hours pumped
  • Operating temperature: -20°C to +50°C
  • Ingress protection IP 65
  • LCD backlight display
  • Single gas CO2 version available part: 61371P
  • Datalogging timed: 24 hours of timed logs at 1 log per minute. Session: Minimum of 180 logs
  • Up to 4 alarms per toxic gas (including STEL/TWA calculations), 3 alarms for O2 & 2 alarms for LEL
  • Approvals ATEX, UL, and MED
  • Two-year standard warranty
  • Size: 140 x 85 x 45mm, weight 0.4kg