ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 10

Application 

Recommended for use in oily or wet conditions, Gloves are also liquid-proof.

Chemical Resistant and Liquid Resistant

Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.

• Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.

• Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.

• Liquitech repels oils, liquids and chemicals.

Cut Resistant

ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.

• Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 8

Application 

Recommended for use in oily or wet conditions, Gloves are also liquid-proof.

Chemical Resistant and Liquid Resistant

Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.

• Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.

• Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.

• Liquitech repels oils, liquids and chemicals.

Cut Resistant

ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.

• Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiDry Plus Safety Gloves Cut Level A, Gauntlet 30CM, Size 9

Application 

Recommended for use in oily or wet conditions, Gloves are also liquid-proof.

Chemical Resistant and Liquid Resistant

Wearing the ATG MaxiDry Glove protects you against dangerous chemicals, micro-organisms and helps increase resistance to oils.

• Gloves are of Type B (Level 2) which protects the user against 3 test chemicals for 30 minutes.

• Gloves protect users from chemicals such as n-heptane, sodium hydroxide 40% and sulphuric acid 96%.

• Liquitech repels oils, liquids and chemicals.

Cut Resistant

ATG MaxiDry 56-530 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides excellent comfort, sensitivity and dexterity to the user.

• Locking-cuff – Ensure gloves does not slip off user’s hand through an exclusive elasticated support in the wrist are which provides a “locking” effect.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size  10

Application

Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.

Chemial Resistance

Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms. 

• Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
• Gloves protect users  from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
• Liquitech repels oils, liquids and chemicals.

Cut Resistance

ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.

• GRIPtech Technology offers a controlled and superior grip in oily and wet applications

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size  8

Application

Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.

Chemial Resistance

Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms. 

• Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
• Gloves protect users  from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
• Liquitech repels oils, liquids and chemicals.

Cut Resistance

ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.

• GRIPtech Technology offers a controlled and superior grip in oily and wet applications

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG MaxiChem Safety Gloves Cut Level A, Gauntlet 30cm, Size  9

Application

Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.

Chemial Resistance

Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms. 

• Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
• Gloves protect users  from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
• Liquitech repels oils, liquids and chemicals.

Cut Resistance

ATG MaxiChem 56-630 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.

• GRIPtech Technology offers a controlled and superior grip in oily and wet applications

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

ATG® Maxichem® Safety Glove Cut Level A, Gauntlet 35cm Size 9

Application

Recommended for use in chemical environments, designed for those working with chemicals requiring high level of protection.

Chemial Resistance

Wearing the ATG MaxiChem glove protects you against dangerous chemicals and micro-organisms. 

• Gloves are of type A (Level 2) which protects the user against 6 test chemicals for 30 minutes.
• Gloves protect users  from chemical such as n-heptane, sodium hydroxide 40%, sulphuric acid 96%, nitric acid 65%, acetic acid 99% and ammonium hydroxide 25%.
• Liquitech repels oils, liquids and chemicals.

Cut Resistance

ATG MaxiChem 56-635 is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

High Dexterity, Comfort and Grip

• ERGOtech reduces hand fatigue through its ultra-lightweight seamless knit liner which provides  the excellent comfort, sensitivity and dexterity to the user.

• Tailored-cuff – Ensure glove’s cuff is close to your hand, so that fingers will be at the tip of the glove to maximise dexterity.

• GRIPtech Technology offers a controlled and superior grip in oily and wet applications

Cleanliness Guaranteed 

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack”, SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Honeywell Perfect Fit Powercoat 950-10 MIX-Colour

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry.

Features

• Neoprene/latex unsupported glove, double-dipped.
• Cotton flocked interior.
• Diamond-patterned finish.

Benefits

• COMFORT : The natural latex gives the glove outstanding flexibility.
  The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.The diamond finish is suitable to grasp dry and damp objects.
• RESISTANCE : The neoprene/latex blend makes the glove suitable for a wide range of chemicals.Double-dipped, it ensures a good level of chemical protection and superior mechanical protection.
• SAFETY : The cuff helps to protect a large part of the forearm.

Industry

Product Use

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-03 EEC Basic standards, EN 388-03 Mechanical risks, EN 374-03 Chimical risks.
• CHARACTERISTICS : unsupported neoprene latex mixed double dipped glove Cotton flocked interior Diamond pattern.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/11/08/0456
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/11/08/0456

Technical Specifications

• Reference Number : 2095010
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Yellow and blue
• Coating Type : Neoprene, latex and cotton
• Length : 32 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 10

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging

• CE HONEYWELL.
• 2095010 XX
• EN 420
• EN 374-3 : AKL.
• EN 388 : 4111

Honeywell Perfect Fit Powercoat 950-10 MIX-Colour

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry.

Features

• Neoprene/latex unsupported glove, double-dipped.
• Cotton flocked interior.
• Diamond-patterned finish.

Benefits

• COMFORT : The natural latex gives the glove outstanding flexibility.
  The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.The diamond finish is suitable to grasp dry and damp objects.
• RESISTANCE : The neoprene/latex blend makes the glove suitable for a wide range of chemicals.Double-dipped, it ensures a good level of chemical protection and superior mechanical protection.
• SAFETY : The cuff helps to protect a large part of the forearm.

Industry

Product Use

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-03 EEC Basic standards, EN 388-03 Mechanical risks, EN 374-03 Chimical risks.
• CHARACTERISTICS : unsupported neoprene latex mixed double dipped glove Cotton flocked interior Diamond pattern.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/11/08/0456
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/11/08/0456

Technical Specifications

• Reference Number : 2095010
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Yellow and blue
• Coating Type : Neoprene, latex and cotton
• Length : 32 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 10

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging

• CE HONEYWELL.
• 2095010 XX
• EN 420
• EN 374-3 : AKL.
• EN 388 : 4111

Honeywell Perfect Fit Powercoat 950-10 MIX-Colour

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry.

Features

• Neoprene/latex unsupported glove, double-dipped.
• Cotton flocked interior.
• Diamond-patterned finish.

Benefits

• COMFORT : The natural latex gives the glove outstanding flexibility.
  The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.The diamond finish is suitable to grasp dry and damp objects.
• RESISTANCE : The neoprene/latex blend makes the glove suitable for a wide range of chemicals.Double-dipped, it ensures a good level of chemical protection and superior mechanical protection.
• SAFETY : The cuff helps to protect a large part of the forearm.

Industry

Product Use

Industrial cleaning, maintenance work, industrial surface treatments. Sanding and stripping, wood industry

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-03 EEC Basic standards, EN 388-03 Mechanical risks, EN 374-03 Chimical risks.
• CHARACTERISTICS : unsupported neoprene latex mixed double dipped glove Cotton flocked interior Diamond pattern.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/11/08/0456
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/11/08/0456

Technical Specifications

• Reference Number : 2095010
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Yellow and blue
• Coating Type : Neoprene, latex and cotton
• Length : 32 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 10

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging

• CE HONEYWELL.
• 2095010 XX
• EN 420
• EN 374-3 : AKL.
• EN 388 : 4111

Honeywell KCL Camatril 733 Nitrile Glove

Camatril® 733 is a proven, top-quality protective glove made of high-quality nitrile, for a wide range of applications. The large spectrum of chemical resistance makes this a versatile glove suitable for numerous fields. Good flexibility, anatomical design and excellent fit ensure a good sensitivity. With its 600 mm length it offers chemical protection beyond the forearm.

Features

• AQL < 0.65 glove surface free from silicone (lacquer indifference, test method automotive industry) good antistatic and electrostatic properties.

Benefits

• COMFORT : good grip when handling wet parts excellent sensitivity good resistance against a variety of hazardous substance groups good temperature flexibility high mechanical resistance.

Industry

Product Use

• Agriculture and horticulture.
• Laboratory work.
• Automotive and supply industry.
• Petrochemical and printing industry.
• Paint shops.
• Chemical industry.
• Maintenance and cleaning.
• Handling of epoxy resins.

Technical Description

• Unsupported green nitrile. Roughened palm. Long cuff.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number :951034
• EC Attestation : EC Attestation
• EC Attestation Number : 951034

Technical Specifications

• Reference Number : 733
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : KCL by Honeywell
• Brand formerly known as : KCL
• Product Technology : Dipped
• Glove/liner color : Green
• Coating Type : Nitrile
• Length : 575-625
• Thickness : 0.5
• Harmlessness : In conformity with European standards
• Sizes : 8,9,10,11

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Honeywell KCL Camatril 733 Nitrile Glove

Camatril® 733 is a proven, top-quality protective glove made of high-quality nitrile, for a wide range of applications. The large spectrum of chemical resistance makes this a versatile glove suitable for numerous fields. Good flexibility, anatomical design and excellent fit ensure a good sensitivity. With its 600 mm length it offers chemical protection beyond the forearm.

Features

• AQL < 0.65 glove surface free from silicone (lacquer indifference, test method automotive industry) good antistatic and electrostatic properties.

Benefits

• COMFORT : good grip when handling wet parts excellent sensitivity good resistance against a variety of hazardous substance groups good temperature flexibility high mechanical resistance.

Industry

Product Use

• Agriculture and horticulture.
• Laboratory work.
• Automotive and supply industry.
• Petrochemical and printing industry.
• Paint shops.
• Chemical industry.
• Maintenance and cleaning.
• Handling of epoxy resins.

Technical Description

• Unsupported green nitrile. Roughened palm. Long cuff.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number :951034
• EC Attestation : EC Attestation
• EC Attestation Number : 951034

Technical Specifications

• Reference Number : 733
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : KCL by Honeywell
• Brand formerly known as : KCL
• Product Technology : Dipped
• Glove/liner color : Green
• Coating Type : Nitrile
• Length : 575-625
• Thickness : 0.5
• Harmlessness : In conformity with European standards
• Sizes : 8,9,10,11

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Honeywell Black Neoprene Cotton Flocked

Protection against a wide range of chemical products (detergents, some solvents, acids and bases).

Features

• Black neoprene Unsupported glove.
• Cotton flocked interior.
• Diamond finish.

Benefits

• COMFORT : Neoprene offers high flexibility.The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.Its diamond finish provides a better grip in a damp environment.
• RESISTANCE : Neoprene provides chemical and mechanical resistance.It resists to acids, bases and solvents as well as industrial adhesives.It is suitable for a wide range of chemicals.
  
• SAFETY : Category III glove for constant quality.The cuff helps to protect a large part of the forearm.

Industry

Product Use

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-2003 EEC Basic standard, EN 388-2003 Mechanical risks, EN 374-2003 Chemical risks.
• CHARACTERISTICS : Unsupported polypropylene glove, Cotton flock inside, Diamond-pattern finish.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/12/08/0487
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/12/08/0487

Technical Specifications

• Reference Number : 2095020
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Black
• Coating Color : Neoprene and cotto
• Length : 33 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 11

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging 

• CE HONEYWELL.
• 2095020 XX
• EN 420
• EN 388 : 3110
• EN 374-3 : AKL

Honeywell Black Neoprene Cotton Flocked

Protection against a wide range of chemical products (detergents, some solvents, acids and bases).

Features

• Black neoprene Unsupported glove.
• Cotton flocked interior.
• Diamond finish.

Benefits

• COMFORT : Neoprene offers high flexibility.The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.Its diamond finish provides a better grip in a damp environment.
• RESISTANCE : Neoprene provides chemical and mechanical resistance.It resists to acids, bases and solvents as well as industrial adhesives.It is suitable for a wide range of chemicals.
  
• SAFETY : Category III glove for constant quality.The cuff helps to protect a large part of the forearm.

Industry

Product Use

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-2003 EEC Basic standard, EN 388-2003 Mechanical risks, EN 374-2003 Chemical risks.
• CHARACTERISTICS : Unsupported polypropylene glove, Cotton flock inside, Diamond-pattern finish.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/12/08/0487
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/12/08/0487

Technical Specifications

• Reference Number : 2095020
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Black
• Coating Color : Neoprene and cotto
• Length : 33 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 11

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging 

• CE HONEYWELL.
• 2095020 XX
• EN 420
• EN 388 : 3110
• EN 374-3 : AKL

Honeywell Black Neoprene Cotton Flocked

Protection against a wide range of chemical products (detergents, some solvents, acids and bases).

Features

• Black neoprene Unsupported glove.
• Cotton flocked interior.
• Diamond finish.

Benefits

• COMFORT : Neoprene offers high flexibility.The cotton flocked interior provides the user with greater comfort and makes it easier to slip in the glove.Its diamond finish provides a better grip in a damp environment.
• RESISTANCE : Neoprene provides chemical and mechanical resistance.It resists to acids, bases and solvents as well as industrial adhesives.It is suitable for a wide range of chemicals.
  
• SAFETY : Category III glove for constant quality.The cuff helps to protect a large part of the forearm.

Industry

Product Use

Technical Description

• CE CATEGORY : III Irreversible risks.
• In accordance with standards : EN 420-2003 EEC Basic standard, EN 388-2003 Mechanical risks, EN 374-2003 Chemical risks.
• CHARACTERISTICS : Unsupported polypropylene glove, Cotton flock inside, Diamond-pattern finish.

Certifications-E.C. Declaration of Conformity

• EC Category PPE : 3
• EC Certificate Number : 0075/797/162/12/08/0487
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/12/08/0487

Technical Specifications

• Reference Number : 2095020
• Product Type : Gloves
• Range : Chemical Protection
• Line : Heavy chemical
• Brand : Honeywell
• Brand formerly known as : SPERIAN
• Product Technology : Dipped Gloves
• Glove/liner color : Black
• Coating Color : Neoprene and cotto
• Length : 33 cm
• Thickness : 0.72 mm
• Harmlessness : In conformity with European standards
• Dexterity : Class 5
• Sizes : 7 to 11

EN 388 - Mechanical Hazards Abrasion Resistance

EN 374-3 Resistance to

Packaging Label-Tagging 

• CE HONEYWELL.
• 2095020 XX
• EN 420
• EN 388 : 3110
• EN 374-3 : AKL

Mapa E-194 Trionic Gloves

• Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile.
• Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system).
• Wide cuff for double-gloving.

Applications

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

Mapa E-194 Trionic Gloves

• Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile.
• Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system).
• Wide cuff for double-gloving.

Applications

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

Mapa E-194 Trionic Gloves

• Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile.
• Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system).
• Wide cuff for double-gloving.

Applications

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

Mapa E-194 Trionic Gloves

• Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile.
• Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system).
• Wide cuff for double-gloving.

Applications

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

Mapa E-194 Trionic Gloves

• Excellent resistance and strong chemical protection against a great number of chemical products: exclusive Trionic formula made from a mix of natural latex, neoprene and nitrile.
• Manufacturing process guarantees a very low level of contaminants: rates of particles, non-volatile residue, extractables => compatible with ISO 5 class (Class M3.5 for International system).
• Wide cuff for double-gloving.

Applications

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to natural latex, dithiocarbamates and thiazoles to use these gloves.
• Unpack and put on the gloves according to the gowning procedure in the workplace.
• Inspect the gloves for any cracks and flaws before use.
• Put the gloves on dry, clean hands. Place the fingers into the glove. Gently pull the glove over the hand and make final adjustments only when both hands are gloved.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Do not touch the external side of the gloves when taking them off.

Storage conditions

• Store the gloves in their original packaging protected from direct sunlight, far from heat sources or electric equipment.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

Mapa Fluonit 468 Viton Glove

Tactile sensitivity with wear-indicator.

• Excellent flexibility and thickness optimization, due to the Mapa multi-layer. technology: good dexterity and comfort.
• Nitrile inner layer: excellent mechanical resistance and a longer service life.
• Green inner layer: wear-indicator for greater user safety.

Applications

Other industries

• Site pollution control.
• Printing.
• Petrochemical refining.

• Metal degreasing and etching.

• Chemical treatments (solvents).
• Resin and adhesive manufacturing.
• Manufacturing paints and varnishes.
• Handling and transporting chemicals (solvents).
• Galvanoplasty.

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the “CE”-type tests.
• Persons sensitised to dithiocarbamates and thiazoles should not use these gloves.
• Inspect the gloves for any defect before use.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL ([email protected]) in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end back in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

• Store the gloves in their original packaging protected from humidity and heat.

Laundering conditions

• Before taking off the gloves, clean them as appropriate.
• in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth.
• in use with a solvent (diluents, etc…) : rub over with a dry cloth.
• in use with acids and alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : improper use of the gloves or submitting them to a cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

• Ensure the inside of the gloves is dry before reusing them.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Specifications

North Unsupported Butyl Glove- B131

North Safety North Butyl Unsupported Glove- B131

Key Features

North Unsupported Butyl Glove- B161

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Military.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Gloves Rough Hand - B161R-8

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish or Grip-Saf™ palm for enhanced grip.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Unsupported Butyl Glove- B161R

North Butyl Unsupported Glove - B174GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish or Grip-Saf™ palm for enhanced grip.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove - B174GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish or Grip-Saf™ palm for enhanced grip.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove - B174GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish or Grip-Saf™ palm for enhanced grip.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove - B174R

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove - B174R

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove - B174R

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate). Available in smooth finish.

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove -B254GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate).

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove -B254GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate).

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove -B254GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate).

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Butyl Unsupported Glove -B254GI

Unsupported Butyl gloves. Butyl has the highest permeation resistance to gas and water vapor, highly resistant to ketones (MEK, MIBL, acetone) and esters (tricresyl phosphate, amyl acetate, ethyl acetate).

Recommended Industries/Use

• Chemical.
• Manufacturing.
• Municipal Services.
• Utilities.

Hazards

• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications

North Viton Chemical Resistant Gloves

North Butyl 10 mil, 11" long black chemical resistant gloves in size 10. Featuring a smooth finish and rolled/beaded cuff.

specifications

North Viton-Unsupported Glove -F124-9

Viton® is the most chemical resistant of all rubbers and it protects against toxic and highly corrosive chemicals. Viton® protects against polychlorinated biphenyls (PCBs), polychlorinated triphenyls, benzene and aniline. As a flouroelatomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.

Key Features

Recommended Industries/Use

• Chemical.

Hazards

North Viton-Unsupported Glove -F124-9

Viton® is the most chemical resistant of all rubbers and it protects against toxic and highly corrosive chemicals. Viton® protects against polychlorinated biphenyls (PCBs), polychlorinated triphenyls, benzene and aniline. As a flouroelatomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.

Key Features

Recommended Industries/Use

• Chemical.

Hazards

North Viton-Unsupported Glove -F124-9

Viton® is the most chemical resistant of all rubbers and it protects against toxic and highly corrosive chemicals. Viton® protects against polychlorinated biphenyls (PCBs), polychlorinated triphenyls, benzene and aniline. As a flouroelatomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.

Key Features

Recommended Industries/Use

• Chemical.

Hazards

North Viton Glove - F284-9

Viton® is the most chemical resistant of all rubbers and it protects against toxic and highly corrosive chemicals. Viton® protects against polychlorinated biphenyls (PCBs), polychlorinated triphenyls, benzene and aniline. As a flouroelatomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.

Key Features

• Excellent chemical resistance to chlorinated and aromatic solvents.
• Can be used in water-based solvents without dissolving.
• Highest permeation resistance to gas and water vapour for greater worker protection, especially when handling toxic substances
• Superior resistance to PCB’s.
• Curved finger and hand design provides a better fit for greater worker comfort.

Recommended Industries/Use

• Chemical.

Hazards

North Viton Glove - F284-9

Viton® is the most chemical resistant of all rubbers and it protects against toxic and highly corrosive chemicals. Viton® protects against polychlorinated biphenyls (PCBs), polychlorinated triphenyls, benzene and aniline. As a flouroelatomer, Viton® provides excellent resistance to aromatic and aliphatic hydrocarbons as well as chlorinated solvents. It is not recommended for ketones.

Key Features

• Excellent chemical resistance to chlorinated and aromatic solvents.
• Can be used in water-based solvents without dissolving.
• Highest permeation resistance to gas and water vapour for greater worker protection, especially when handling toxic substances
• Superior resistance to PCB’s.
• Curved finger and hand design provides a better fit for greater worker comfort.

Recommended Industries/Use

• Chemical.

Hazards

North Nitri-Guard Nitrile Gloves - LA132G

Feature

Benefit

COMFORT Its nitrile formula has been selected to give the glove greater elasticity and unrivalled dexterity. The cotton flocked interior provides the user with greater comfort. The glove's rough finish improves the grip, to grasp objects in a greasy or damp atmosphere. Gloves will not swell, sag or weaken from fat absorption. Curved shaped hand provides a natural fit. RESISTANCE Nitrile ensures good chemical properties and excellent mechanical characteristics (abrasion). It is particularly suitable for the handling of oils, greases and hydrocarbons. Out performs natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fats. Avoid contact with solvents containing ketones. SAFETY Category III glove for constant quality. The cuff helps to protect a part of the forearm. HYGIENE Gloves are free of latex proteins which can cause allergic reactions.

Industry

• Agriculture.
• Automotive and Part Manufacturer.
• Chemical Industries.
• Food Industries.
• Industrial Cleaning.
• Laboratory.
• Petro-chemical.
• Water treatment.

Specifications

Certifications

North Nitri-Guard Nitrile Gloves - LA132G

Feature

Benefit

COMFORT Its nitrile formula has been selected to give the glove greater elasticity and unrivalled dexterity. The cotton flocked interior provides the user with greater comfort. The glove's rough finish improves the grip, to grasp objects in a greasy or damp atmosphere. Gloves will not swell, sag or weaken from fat absorption. Curved shaped hand provides a natural fit. RESISTANCE Nitrile ensures good chemical properties and excellent mechanical characteristics (abrasion). It is particularly suitable for the handling of oils, greases and hydrocarbons. Out performs natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fats. Avoid contact with solvents containing ketones. SAFETY Category III glove for constant quality. The cuff helps to protect a part of the forearm. HYGIENE Gloves are free of latex proteins which can cause allergic reactions.

Industry

• Agriculture.
• Automotive and Part Manufacturer.
• Chemical Industries.
• Food Industries.
• Industrial Cleaning.
• Laboratory.
• Petro-chemical.
• Water treatment.

Specifications

Certifications

North Nitrile Gloves - LA142G

Unsupported nitrile, chemical resistant gloves. Nitrile formulation contains no latex proteins which could cause allergic reactions. Nitrile offers superior resistance to cuts, snags, abrasions and punctures. Nitrile will not swell, sag or weaken from fat absorption. Complies with USDA and FDA regulations, 21 CFR, for use in food processing.

Recommended Industries/Use

• Agriculture.
• Chemical.
• Food Services.
• Manufacturing.

Hazards

• Abrasion.
• Chemical.

Regulations

• ANSI/ISEA 105 - ASTM D3389-05 Abrasion Test.
• ANSI/ISEA 105 - ASTM F1790-97 Cut Test.
• EN374 - Permiation and breakthrough time.
• EN388 - Mechanical risks from abrasion, cut, tear and puncture.
• EN420 - General Requirements - This standard defines the general requirements for protective gloves in terms of construction, fitness of purpose and safety.
• OSHA Standard -29 CFR 1915.157 - The employer shall ensure that each affected employee uses appropriate hand protection and other protective clothing where there is exposure to hazards such as skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, harmful temperature extremes, and sharp objects.

Specifications