Tilsatec 18" Tubular Sleeve With Thumb Slot, Cut Level E

Application

Recommended for use in automotive industry, metal fabrication/stamping, manufacturing, glass industry and waste handing.

Cut Resistance

• Tilsatec 18” tubular sleeve is of cut level E. Sleeves are designed to protect against high cut hazards such as metal fabrication.

Heat Resistance

• Contact heat level 4: Allows you to withstand up to 500 degree Celsius for at least 15 seconds.

Abrasion Resistance

• Tilsatec 18” tubular sleeve is of performance level 2. Sleeves are designed to go through at least 500 resistance cycles.

Tearing Strength

• Tilsatec 18” tubular sleeve is of performance level 4. Sleeves are designed to withstand up to 75 Newtons.

Features

• Rhino yarn cut resistant technology

• Seamless knit with smooth finish

• Tubular close fitting shape for maximum dexterity

• Thumb slot to keep sleeve in place

• Elasticated top to prevent sleeve from falling down

Specification 

ATG Maxicut Ultra Cut-Resistant Sleeves, Cut Level C, Size 7

Application 

Recommended for use in dry environment, perfect companion for ATG cut gloves to offer increased protection for user’s arm.

Cut Resistance 

• ATG MaxiCut Ultra 89-5745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.

• CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.

• Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.

High Dexterity, Comfort and Grip

• ATG gloves are designed based on a hand at resting position. It reduces hand fatigue and improves comfort through the gloves consistent liner penetration, where only the glove’s soft liner is resting against the user’s skin.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Specifications

Honeywell Aracut Sleeves

Protection of the forearm and palm against cuts.

Feature's

• 2 ply Kevlar® knitted sleeve Thumbhole.

Benefits

• COMFORT : The knitting technique helps to obtain a cuff close to the hand and good dexterity.
  
• The glove offers maximum comfort and added sturdiness.
• The reinforced thumb offers greater support.
• RESISTANCE : The Kevlar fibre offers good resistance to cuts and protection against thermal hazards (contact heat). Its dual thickness improves the cuff's mechanical and thermal performance. 
  
  
• SAFETY : Its length of 45cm ensures full protection of the forearm.

Industry

Product Use

• Protection of the forearm and palm against cuts.

Technical Description

• CE CATEGORY : II Intermediary risks.
• In accordance with standards :EN 420-03 EEC Basic standard,EN 388-03 Mechanical hazard. EN 407-04 Heat hazards.
• CHARACTERISTICS : 2 ply Kevlar® knitted sleeve Thumbhole.

Certifications-E.C. Declaration of Conformity

• EC Category PPE  : 2
• EC Certificate Number : 0075/797/162/07/12/0584
• EC Attestation : EC Attestation
• EC Attestation Number : 0075/797/162/07/12/0584-Ext. 01/05/09

Technical Specification

• Reference Number : 4402835
• Product Type : Gloves
• Range : Cut and Puncture Protection
• Line : Cut resistant
• Brand : Honeywell
• Brand formerly known as :SPERIAN
• Product Technology : Knitted
• Gauge : 10
• Coating Type : Kevlar®
• Length : 45 cm
• Harmlessness : In conformity with the European standards
• Dexterity : Class 5
• Sizes : Unique size

EN 407 - Heat and/or Fire

EN 388 - Mechanical Hazards Abrasion Resistance

Packaging Label-Tagging

• CE Honeywell 4402835 XX
• EN 420
• EN 388 : 132X
• EN 407 : X1XXXX

TILSATEC RHINOGUARD 9” SLEEVE

Application

Recommended for use in metal fabrication works, waste management, security services and emergency services such as police, fire fighters and search & rescue.

Cut Resistance

• Tilsatec Rhinoguard 9” sleeve is of cut level F. Sleeves are designed to protect against higher cut hazards such as metal stamping.

Abrasion Resistance

• Tilsatec Rhinoguard 9” sleeve is of performance level 4. Sleeves are designed to go through at least 8000 resistance cycles.

Tearing Strength

• Tilsatec Rhinoguard 9” sleeve is of performance level 4. Sleeves are designed to withstand up to 75 Newtons.

Puncture Resistance

• Tilsatec Rhinoguard 9” sleeve is of performance level 4. Sleeves are designed to withstand up to 150 Newtons.

Features

• Rhino yarn cut resistant technology

• ASTM F2878-10 hypodermic needle test: 5.7 newton

• Double width adjustable straps for secure fit

• Fire resistant properties of RHINOGUARD will not diminish with multiple laundering cycles

• RHINOGUARD fabric can be expose to temperature of up to 200 degree Celsius

Specification 

TILSATEC RHINOGUARD 19” SLEEVE (P/PIECE), 20 PCS/CASE

Application

Recommended for use in metal fabrication works, waste management, security services and emergency services such as police, fire fighters and search & rescue.

Cut Resistance

• Tilsatec Rhinoguard 19” sleeve is of cut level F. Sleeves are designed to protect against higher cut hazards such as metal stamping.

Abrasion Resistance

• Tilsatec Rhinoguard 19” sleeve is of performance level 4. Sleeves are designed to go through at least 8000 resistance cycles.

Tearing Strength

• Tilsatec Rhinoguard 19” sleeve is of performance level 4. Sleeves are designed to withstand up to 75 Newtons.

Puncture Resistance

• Tilsatec Rhinoguard 19” sleeve is of performance level 4. Sleeves are designed to withstand up to 150 Newtons.

Features

• Rhino yarn cut resistant technology

• ASTM F2878-10 hypodermic needle test: 5.7 newtons

Specification 

Tilsatec Orion 18" Sleeve With Thumb Slot-TTP818

The Orion™ is a seamless knitted, close fitting sleeve providing level 5 cut resistance. The smooth finish provides enhanced wearer comfort and ease of movement, whilst the thumb slot provides a secure fit.

• EN388 Level 5 cut resistance.
• EN388 1,5,3,X.
• Seamless knit with a smooth finish.
• Maximum dexterity and user comfort.
• Thumb slot gives a secure fit.

ATG Maxicut Ultra Cut-Resistant Sleeves, Cut Level C, Size 10

Application 

Recommended for use in dry environment, perfect companion for ATG cut gloves to offer increased protection for user’s arm.

Cut Resistance 

• ATG MaxiCut Ultra 89-5745 is of Cut level C. Gloves are designed to protect protection against moderate cut hazards such as light glass handling and metal stamping.

• CUTtech technology provides a high level of comfort to user while offering good cut protection through high performance yarns and fibres present throughout the gloves.

• Reinforcement between thumb and forefinger helps improve glove’s cut resistance and protects the user.

High Dexterity, Comfort and Grip

• ATG gloves are designed based on a hand at resting position. It reduces hand fatigue and improves comfort through the gloves consistent liner penetration, where only the glove’s soft liner is resting against the user’s skin.

• ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

• 360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

• GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Cleanliness Guaranteed

• Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

• ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Directions for cleaning 

• Soak them in warm water < 40 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

Specifications