TYCHEM® CPF 2

• Effective protection against a range of chemicals

• Uses include PCB clean-up, waste management, hazardous response and nuclear environments

• Tychem® CPF 2 is Saranex® 23-P film laminated to a tough, 1.5 oz. polypropylene fabric

• Rugged and durable, even in environments where abrasion is an issue

DUPONT TYCHEM F COVERALL

DuPont™ Tychem® F, hooded coverall. Available in grey for discretionary needs. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents. 

Tychem® F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM F COVERALL

DuPont™ Tychem® F, hooded coverall. Available in grey for discretionary needs. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents. 

Tychem® F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM F COVERALL

DuPont™ Tychem® F, hooded coverall. Available in grey for discretionary needs. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents. 

Tychem® F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM F COVERALL

DuPont™ Tychem® F, hooded coverall. Available in grey for discretionary needs. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents. 

Tychem® F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM F COVERALL

DuPont™ Tychem® F, hooded coverall. Available in grey for discretionary needs. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks.
Tychem® F garments are made from a lightweight and durable fabric (<500g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents. 

Tychem® F is used for a broad range of applications from chemical spill clean-up, emergency response, to military and petrochemical applications.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT TYCHEM C COVERALL

DuPont™ Tychem® C, hooded coverall. Elasticated face, wrists, waist and ankles for an optimal fit, thumb loops prevent sleeves from riding up. Self-adhesive chin flap for tight seal of suit to face-masks. Made from a lightweight and durable fabric (<450g per garment), Tychem® C garments utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure). Tychem® C is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Chemical protective clothing, Category III, Type 3-B, 4-B, 5-B and 6-B
• EN 14126 (barrier to infective agents), EN 1073-2 (protection against radioactive contamination)
• Antistatic treatment (EN 1149-5) - on inside
• Stitched and over-taped seams with barrier tape for protection and strength
• Self-adhesive double zipper flap closure system for higher protection

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 JACKET, TC671TYL, YELLOW

DuPont™ Tychem® 2000, model TC671T YL. Hooded jacket available in yellow and in sizes MD to 2XL. Stitched and over-taped seams. Without pockets. Elasticated cuffs and open bottom. Zipper closure. Self-adhesive chin flap for tight seal of suit to face-masks.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Hooded jacket with zipper closure
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

About Dupont™ Tychem®

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

Specifications

• Full Part Number    TYCPJ30TYLA0
• Fabric / Material    Tychem® 2000 C
• Design    Jacket with hood
• Seam    Stitched and over-taped
• Color    Yellow
• Sizes    MD,LG,XL,2XL
• Quantity/Box    50 per box, individually packed

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 JACKET, TC671TYL, YELLOW

DuPont™ Tychem® 2000, model TC671T YL. Hooded jacket available in yellow and in sizes MD to 2XL. Stitched and over-taped seams. Without pockets. Elasticated cuffs and open bottom. Zipper closure. Self-adhesive chin flap for tight seal of suit to face-masks.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Hooded jacket with zipper closure
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

About Dupont™ Tychem®

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

Specifications

• Full Part Number    TYCPJ30TYLA0
• Fabric / Material    Tychem® 2000 C
• Design    Jacket with hood
• Seam    Stitched and over-taped
• Color    Yellow
• Sizes    MD,LG,XL,2XL
• Quantity/Box    50 per box, individually packed

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 JACKET, TC671TYL, YELLOW

DuPont™ Tychem® 2000, model TC671T YL. Hooded jacket available in yellow and in sizes MD to 2XL. Stitched and over-taped seams. Without pockets. Elasticated cuffs and open bottom. Zipper closure. Self-adhesive chin flap for tight seal of suit to face-masks.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Hooded jacket with zipper closure
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

About Dupont™ Tychem®

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

Specifications

• Full Part Number    TYCPJ30TYLA0
• Fabric / Material    Tychem® 2000 C
• Design    Jacket with hood
• Seam    Stitched and over-taped
• Color    Yellow
• Sizes    MD,LG,XL,2XL
• Quantity/Box    50 per box, individually packed

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 JACKET, TC671TYL, YELLOW

DuPont™ Tychem® 2000, model TC671T YL. Hooded jacket available in yellow and in sizes MD to 2XL. Stitched and over-taped seams. Without pockets. Elasticated cuffs and open bottom. Zipper closure. Self-adhesive chin flap for tight seal of suit to face-masks.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Hooded jacket with zipper closure
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

About Dupont™ Tychem®

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

Specifications

• Full Part Number    TYCPJ30TYLA0
• Fabric / Material    Tychem® 2000 C
• Design    Jacket with hood
• Seam    Stitched and over-taped
• Color    Yellow
• Sizes    MD,LG,XL,2XL
• Quantity/Box    50 per box, individually packed

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 PANTS, TY198SWH, YELLOW

DuPont™ Tychem® 2000, model TY198SWH. Pants available in yellow and in sizes MD to 2XL. Without pockets. Elasticated waist and ankles.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Pants without pockets
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

Specifications

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 PANTS, TY198SWH, YELLOW

DuPont™ Tychem® 2000, model TY198SWH. Pants available in yellow and in sizes MD to 2XL. Without pockets. Elasticated waist and ankles.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Pants without pockets
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

Specifications

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

DUPONT™ TYCHEM® 2000 PANTS, TY198SWH, YELLOW

DuPont™ Tychem® 2000, model TY198SWH. Pants available in yellow and in sizes MD to 2XL. Without pockets. Elasticated waist and ankles.

Specially designed for use with Tychem® apparel, Tychem® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Made from a lightweight  and durable fabric (<450g per garment), Tychem® 2000 garments and accessories utilise the strength of Tyvek® and a polymeric barrier coating to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Tychem® 2000 is used for splash or pressurised splash protection in a variety of industrial environments, including pulp and paper manufacturing, food processing, chemical processing and pharmaceutical manufacturing.

• Pants without pockets
• Antistatic treatment (EN 1149-1) - on inside; see footnotes
• EN 14126 (barrier to infective agents)
• Stitched and over-taped seams with barrier tape for protection and strength

Specifications

About Dupont™ Tychem® 

Tychem® chemical suits go through rigorous testing. Tychem® fabrics have been tested by third party labs for permeation against hundreds of chemicals. The result is chemical protection available against hundreds of toxic liquids and vapors from sarin to chlorine gas.

Tychem® TK 554T

Tychem® TK exhibits excellent chemical barrier properties and offers an extremely durable fabric that is puncture- and tear-resistant. Tychem® TK fabric shows at least 30 minutes of barrier protection to 322 challenge chemicals with no observed breakthrough. Tychem® TK is specifically developed for protection against toxic, corrosive gases, liquids and solid chemicals. This high-performance chemical barrier fabric is suited for industrial, HazMat, and domestic preparedness applications.

DuPont™ Tychem® TK Encapsulated Level A Suit. Expanded Back, Front Entry. Extra-Wide Visor, 3 Layers: 40 mil PVC / Teflon® 5 mil / 20 mil PVC. Attached Dual Layer Gloves, Internal: Multi-layer laminate / External: Butyl. Attached Socks with Outer Boot Flaps. Double Storm Flap with Hook & Loop Closure. Two Exhaust Valves. Double Taped Seams. Lime Yellow.

• Encapsulated Level A garment design is our highest level of protection from liquid splash and vapor/gas exposures for both the wearer and respiratory equipment
• Expanded faceshield provides wide 220 degree viewing angle. EX faceshield is three-layer laminate composed of 40 mil PVC/5 mil Teflon® /20 mil PVC
• Front entry design allows wearer to partially don garment (maintain standby position) without assistance
• Expanded back to accommodate self-contained air breathing apparatus (SCBA)
• Vapor tight zipper. Extra long to increase garment opening and aid donning and doffing
• Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper
• Butyl B 161 gloves provide mechanical and physical durability to help protect inner glove. Gloves are attached with vapor tight ring and clamp system and are replaceable.
• Integrated socks composed of garment material
• Two exhaust valves release higher pressure inside encapsulating garments while simultaneously helping to prevent inward leakage of external vapors or particles into the garment. One-way valves are positive pressure and open on demand. Valves include splash covers made of barrier material to help prevent liquid intrusion. Valves are located on left back of head and right lower back.
• Internal adjustable waist belt system for support and improved fit
• Additional barrier material sewn at knees and over taped for added abrasion resistance when kneeling or crawling
• Each suit has a unique serial number and is fully tested at time of manufacture including positive air pressure integrity testing per ASTM F1052.
• Pass-thrus are optional and can be installed upon request when ordering. Some suits are available with optional pass-thrus to accommodate the following SCBA manufacturers: Scott, Interspiro, MSA, Draeger, Survivair®. Please call Customer Service 1-800-931-3456 for additional information.
• Made in the USA, North American Free Trade Agreement (NAFTA) compliant and Trade Agreement Act (TAA) compliant

Specifications

Reference Number: TK554T LY

Tychem® Thermopro 198T

Tychem® ThermoPro offers a single layer garment that provides triple hazard protection from liquid-chemical splash, flash fire and electric arc. Tychem® ThermoPro garments are designed to combine the trusted chemical protection of Tychem® and thermal/arc protection of Nomex® into a single layer garment. Tychem® ThermoPro garments are designed to help provide industrial workers and Hazmat responders with permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents and to provide escape time from flash fires and protection from electric arc. Tychem® ThermoPro fabric provides at least eight hours breakthrough protection against 17 of the 21 standard ASTM F1001 chemicals and at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents. The arc rating of Tychem® ThermoPro fabric is 15 cal/cm² E_bt. This exceeds the NFPA 70E Hazard Risk Category 2 requirement of 8 cal/cm². Typical Applications: HazMat Teams in Fire Departments, Industrial Fire Brigades, Clandestine Lab Investigation, Industrial Chemical Processing Plants, Laboratories.

DuPont™ Tychem® ThermoPro Coverall. Certified to NFPA 1992, NFPA 2112, and the Category 2 Requirements of NFPA 70E. Respirator Fit, Drawstring Hood. Elastic Wrists. Open Ankles. Double Storm Flap with Hook & Loop Closure. Taped Seams. Orange.

• Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing.
• Attached respirator-fit hood with drawstring to pull tightly around respirator; longer zipper extends to chin for complete coverage of neck area.
• Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper
• Bright orange color for high visibility

Specifications

Reference Number: TP198T OR

Tychem® Thermopro 198T

Tychem® ThermoPro offers a single layer garment that provides triple hazard protection from liquid-chemical splash, flash fire and electric arc. Tychem® ThermoPro garments are designed to combine the trusted chemical protection of Tychem® and thermal/arc protection of Nomex® into a single layer garment. Tychem® ThermoPro garments are designed to help provide industrial workers and Hazmat responders with permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents and to provide escape time from flash fires and protection from electric arc. Tychem® ThermoPro fabric provides at least eight hours breakthrough protection against 17 of the 21 standard ASTM F1001 chemicals and at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents. The arc rating of Tychem® ThermoPro fabric is 15 cal/cm² E_bt. This exceeds the NFPA 70E Hazard Risk Category 2 requirement of 8 cal/cm². Typical Applications: HazMat Teams in Fire Departments, Industrial Fire Brigades, Clandestine Lab Investigation, Industrial Chemical Processing Plants, Laboratories.

DuPont™ Tychem® ThermoPro Coverall. Certified to NFPA 1992, NFPA 2112, and the Category 2 Requirements of NFPA 70E. Respirator Fit, Drawstring Hood. Elastic Wrists. Open Ankles. Double Storm Flap with Hook & Loop Closure. Taped Seams. Orange.

• Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing.
• Attached respirator-fit hood with drawstring to pull tightly around respirator; longer zipper extends to chin for complete coverage of neck area.
• Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper
• Bright orange color for high visibility

Specifications

Reference Number: TP198T OR

Tychem® Thermopro 198T

Tychem® ThermoPro offers a single layer garment that provides triple hazard protection from liquid-chemical splash, flash fire and electric arc. Tychem® ThermoPro garments are designed to combine the trusted chemical protection of Tychem® and thermal/arc protection of Nomex® into a single layer garment. Tychem® ThermoPro garments are designed to help provide industrial workers and Hazmat responders with permeation protection against a broad range of toxic industrial chemicals and chemical warfare agents and to provide escape time from flash fires and protection from electric arc. Tychem® ThermoPro fabric provides at least eight hours breakthrough protection against 17 of the 21 standard ASTM F1001 chemicals and at least 30 minutes of protection for more than 180 chemical challenges including chemical warfare agents. The arc rating of Tychem® ThermoPro fabric is 15 cal/cm² E_bt. This exceeds the NFPA 70E Hazard Risk Category 2 requirement of 8 cal/cm². Typical Applications: HazMat Teams in Fire Departments, Industrial Fire Brigades, Clandestine Lab Investigation, Industrial Chemical Processing Plants, Laboratories.

DuPont™ Tychem® ThermoPro Coverall. Certified to NFPA 1992, NFPA 2112, and the Category 2 Requirements of NFPA 70E. Respirator Fit, Drawstring Hood. Elastic Wrists. Open Ankles. Double Storm Flap with Hook & Loop Closure. Taped Seams. Orange.

• Taped seams provide strong chemical resistance against heavy liquid splashes. A sewn seam is covered with a strip of compatible chemical-resistant material through heat sealing.
• Attached respirator-fit hood with drawstring to pull tightly around respirator; longer zipper extends to chin for complete coverage of neck area.
• Storm flap covers zipper which can be secured by the wearer with rugged hook and loop material to prevent intrusion at zipper
• Bright orange color for high visibility

Specifications

Reference Number: TP198T OR

Ansell AlphaTec® 3000, MODEL 214 APRON WITH SLEEVE, L (45 PCS/CASE)

Previously known as: MICROCHEM® 3000 Apron with Sleeve - Model 214

Key Features and Benefits

• Protective multi-layer barrier fabric effective against numerous chemicals
• Highly visible bright yellow color for improved worker safety 
• Lightweight and durable

APPLICATION

• Chemical
• Mining
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Apron with sleeves with rear velcro fastening, elasticated wrists and welded seams.

SEAM TYPE

• Ultrasonically Welded Seams

Specifications

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000, MODEL 214 APRON WITH SLEEVE, M (45 PCS/CASE)

Previously known as: MICROCHEM® 3000 Apron with Sleeve - Model 214

Key Features and Benefits

• Protective multi-layer barrier fabric effective against numerous chemicals
• Highly visible bright yellow color for improved worker safety 
• Lightweight and durable

Application

• Chemical
• Mining
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Apron with sleeves with rear velcro fastening, elasticated wrists and welded seams.

SEAM TYPE

• Ultrasonically Welded Seams

Specifications

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000, MODEL 214 APRON WITH SLEEVE, XL (45 PCS/CASE)

Previously known as: MICROCHEM® 3000 Apron with Sleeve - Model 214

Key Features and Benefits

• Protective multi-layer barrier fabric effective against numerous chemicals
• Highly visible bright yellow color for improved worker safety 
• Lightweight and durable

Application 

• Chemical
• Mining
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Apron with sleeves with rear velcro fastening, elasticated wrists and welded seams.

SEAM TYPE

• Ultrasonically Welded Seams

Specifications

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, LARGE (PACKING:20PCS/CSE)

Previously Known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, MEDIUM (PACKING:25PCS/CSE)

Previously Known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, SMALL (PACKING:25PCS/CSE)

Previously known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, X LARGE (PACKING:20PCS/CSE)

Previously Known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, XXLARGE (PACKING:20PCS/CSE)

Previously Known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 3000-YE COVERALL HOOD 111, 3XL (PACKING:20PCS/CSE)

Previously Known as Microchem 3000 Chemical Protective Coverall

MICROCHEM® 3000 Chemical Protective Coverall is one of the lightest and most comfortable chemical protective garments on the market today.
Featuring a soft and flexible 3-layer fabric, strong ultrasonically welded seams and an effective chemical barrier against most inorganic chemicals.

Features & Benefits

• Multi-layer barrier fabric provides effective protection against numerous chemicals
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Lightweight and durable
• Highly visible bright yellow color for improved worker safety 
• Anti-static, tested according to EN 1149-5 and AATCC 76

Applications

• Chemical
• Mining
• Oil and gas
• Life Sciences
• Food Processing

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Coverall with 2-piece hood, double zip closure, double cuffs, elasticated hood, waist, double cuffs and ankles.

Ultrasonically Welded Seams

• Provides a strong liquid and particle barrier.

MICROCHEM® coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• Type 5 EN ISO 13982-1 Dry particle suit.
• EN14126 Barrier to infective agents.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROCHEM® 3000 Technical Data

EN ISO 6529 Chemical Permeation Test Results

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000 MODEL 126 APOLLO FULLY ENCAPSULATED COVERALL WITH SCBA REAR POUCH, XL

Previously Known as Microchem® 4000 Apollo Fully Encapsuated Coverall With SCBA Rear Pouch

Trusted by fire and rescue crews around the world

Developed with the UK Fire & Rescue services MICROCHEM® 4000 APOLLO is a fully encapsulated liquid tight chemical suit designed for use in conjunction with self contained breathing apparatus (SCBA).

DESIGN FEATURES

• Pass-thru device for use with fall arrest equipment, 2-piece hood, double zip closure, double cuffs with knitted inner cuff. Elasticated hood, waist, outer cuff and ankles. Elasticated hood, waist, wrists and ankles.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Welded and taped seams, our highest barrier to liquids and particulates
• Enhanced comfort, knitted inner cuffs and inner textile type fabric improves wearer acceptance
• Anti-static, tested according to EN 1149-5

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

MICROCHEM® 4000 coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• EN14126 Barrier to infective agents.

Ultrasonically Welded & Taped Seams

A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquid and particulates.

Suit Features

• Rear entry double zip system.
• Rear mounted BA (breathing apparatus) pouch – universal fit with most BA.
• Attached socks with boot overflap.
• Attached Ansell Barrier® Gloves.
• Exhalation valves.
• Clear face visor.
• Ultrasonically welded and taped seams.
• Bat-wing design enables air gauge checking within the suit.
• Chest strap for DSU (Distress Signal Unit).
• Adjustable internal support braces.
• Sizes: M-2XL.
• Colour: Green.

Now known as AlphaTec® 4000 APOLLO - Model 126

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, LARGE

Previously Known as MICROCHEM® 4000, MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, SIZE L

Trusted by fire and rescue crews around the world

Developed with the UK Fire & Rescue services MICROCHEM® 4000 APOLLO is a fully encapsulated liquid tight chemical suit designed for use in conjunction with self contained breathing apparatus (SCBA).

DESIGN FEATURES

• Pass-thru device for use with fall arrest equipment, 2-piece hood, double zip closure, double cuffs with knitted inner cuff. Elasticated hood, waist, outer cuff and ankles. Elasticated hood, waist, wrists and ankles.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Welded and taped seams, our highest barrier to liquids and particulates
• Enhanced comfort, knitted inner cuffs and inner textile type fabric improves wearer acceptance
• Anti-static, tested according to EN 1149-5

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

MICROCHEM® 4000 coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• EN14126 Barrier to infective agents.

Ultrasonically Welded & Taped Seams

A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquid and particulates.

Suit Features

• Rear entry double zip system.
• Rear mounted BA (breathing apparatus) pouch – universal fit with most BA.
• Attached socks with boot overflap.
• Attached Ansell Barrier® Gloves.
• Exhalation valves.
• Clear face visor.
• Ultrasonically welded and taped seams.
• Bat-wing design enables air gauge checking within the suit.
• Chest strap for DSU (Distress Signal Unit).
• Adjustable internal support braces.
• Sizes: M-2XL.
• Colour: Green.

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, MEDIUM

Previously Known as MICROCHEM® 4000, MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, SIZE L

Trusted by fire and rescue crews around the world

Developed with the UK Fire & Rescue services MICROCHEM® 4000 APOLLO is a fully encapsulated liquid tight chemical suit designed for use in conjunction with self contained breathing apparatus (SCBA).

DESIGN FEATURES

• Pass-thru device for use with fall arrest equipment, 2-piece hood, double zip closure, double cuffs with knitted inner cuff. Elasticated hood, waist, outer cuff and ankles. Elasticated hood, waist, wrists and ankles.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Welded and taped seams, our highest barrier to liquids and particulates
• Enhanced comfort, knitted inner cuffs and inner textile type fabric improves wearer acceptance
• Anti-static, tested according to EN 1149-5

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

MICROCHEM® 4000 coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• EN14126 Barrier to infective agents.

Ultrasonically Welded & Taped Seams

A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquid and particulates.

Suit Features

• Rear entry double zip system.
• Rear mounted BA (breathing apparatus) pouch – universal fit with most BA.
• Attached socks with boot overflap.
• Attached Ansell Barrier® Gloves.
• Exhalation valves.
• Clear face visor.
• Ultrasonically welded and taped seams.
• Bat-wing design enables air gauge checking within the suit.
• Chest strap for DSU (Distress Signal Unit).
• Adjustable internal support braces.
• Sizes: M-2XL.
• Colour: Green.

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, SMALL

Previously Known as MICROCHEM® 4000, MODEL 162 C/ALL PASS-THRU DEVICE FOR USE WITH FALL ARREST EQUIPMENT, SIZE L

Trusted by fire and rescue crews around the world

Developed with the UK Fire & Rescue services MICROCHEM® 4000 APOLLO is a fully encapsulated liquid tight chemical suit designed for use in conjunction with self contained breathing apparatus (SCBA).

DESIGN FEATURES

• Pass-thru device for use with fall arrest equipment, 2-piece hood, double zip closure, double cuffs with knitted inner cuff. Elasticated hood, waist, outer cuff and ankles. Elasticated hood, waist, wrists and ankles.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect, typical innovative features include dual zip systems and double cuffs
• Welded and taped seams, our highest barrier to liquids and particulates
• Enhanced comfort, knitted inner cuffs and inner textile type fabric improves wearer acceptance
• Anti-static, tested according to EN 1149-5

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

MICROCHEM® 4000 coveralls meet the following European Norms

• Type 3 EN14605 Liquid tight suit.
• Type 4 EN14605 Spray tight suit.
• EN14126 Barrier to infective agents.

Ultrasonically Welded & Taped Seams

A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquid and particulates.

Suit Features

• Rear entry double zip system.
• Rear mounted BA (breathing apparatus) pouch – universal fit with most BA.
• Attached socks with boot overflap.
• Attached Ansell Barrier® Gloves.
• Exhalation valves.
• Clear face visor.
• Ultrasonically welded and taped seams.
• Bat-wing design enables air gauge checking within the suit.
• Chest strap for DSU (Distress Signal Unit).
• Adjustable internal support braces.
• Sizes: M-2XL.
• Colour: Green.

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 215 APRON WITH SLEEVES, LARGE

Previously Known as Microchem® 4000, Model 215 Apron With Sleeves

MICROCHEM® 4000 is designed to provide an exceptional barrier against organic and inorganic chemicals and biological agents.
A unique multi-layer barrier fabric renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

• Velcro fastening to neck.
• Tie fastening at the waist.
• Double cuff with knitted inner cuff.
• Welded and taped seams.
• Sizes: S-5XL.
• Colour: Green.

Features & Benefits

• Exceptional chemical protection
• Velcro fastening to neck
• Tie fastening at the waist
• Double cuff with knitted inner cuff
• Welded and taped seams

Applications

• Chemical
• Life Sciences
• Mining
• Fire and Rescue
• Oil and gas

MICROCHEM® 4000 coveralls meet the following European Norms

•  Type 3 EN14605 Liquid tight suit.
•  Type 4 EN14605 Spray tight suit.
•  Type 5 EN ISO 13982-1 Dry particle suit.
•  EN14126 Barrier to infective agents.
•  EN1073-2 Barrier to radioactive particulates - Class 1.
•  EN1149-5 Anti-static.

Ultrasonically Welded & Taped Seams 

• A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquids and particulates. 

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 215 APRON WITH SLEEVES, MEDIUM

Previously Known as Microchem® 4000, Model 215 Apron With Sleeves

MICROCHEM® 4000 is designed to provide an exceptional barrier against organic and inorganic chemicals and biological agents.
A unique multi-layer barrier fabric renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

• Velcro fastening to neck.
• Tie fastening at the waist.
• Double cuff with knitted inner cuff.
• Welded and taped seams.
• Sizes: S-5XL.
• Colour: Green.

Features & Benefits

• Exceptional chemical protection
• Velcro fastening to neck
• Tie fastening at the waist
• Double cuff with knitted inner cuff
• Welded and taped seams

Applications

• Chemical
• Life Sciences
• Mining
• Fire and Rescue
• Oil and gas

MICROCHEM® 4000 coveralls meet the following European Norms

•  Type 3 EN14605 Liquid tight suit.
•  Type 4 EN14605 Spray tight suit.
•  Type 5 EN ISO 13982-1 Dry particle suit.
•  EN14126 Barrier to infective agents.
•  EN1073-2 Barrier to radioactive particulates - Class 1.
•  EN1149-5 Anti-static.

Ultrasonically Welded & Taped Seams 

• A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquids and particulates. 

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 215 APRON WITH SLEEVES, X LARGE

Previously Known as Microchem® 4000, Model 215 Apron With Sleeves

MICROCHEM® 4000 is designed to provide an exceptional barrier against organic and inorganic chemicals and biological agents.
A unique multi-layer barrier fabric renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

• Velcro fastening to neck.
• Tie fastening at the waist.
• Double cuff with knitted inner cuff.
• Welded and taped seams.
• Sizes: S-5XL.
• Colour: Green.

Features & Benefits

• Exceptional chemical protection
• Velcro fastening to neck
• Tie fastening at the waist
• Double cuff with knitted inner cuff
• Welded and taped seams

Applications

• Chemical
• Life Sciences
• Mining
• Fire and Rescue
• Oil and gas

MICROCHEM® 4000 coveralls meet the following European Norms

•  Type 3 EN14605 Liquid tight suit.
•  Type 4 EN14605 Spray tight suit.
•  Type 5 EN ISO 13982-1 Dry particle suit.
•  EN14126 Barrier to infective agents.
•  EN1073-2 Barrier to radioactive particulates - Class 1.
•  EN1149-5 Anti-static.

Ultrasonically Welded & Taped Seams 

• A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquids and particulates. 

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 301 TROUSERS, STITCHED & TAPE SEAMS, ELASTICATED WAIST & ACKLES, LARGE (25 PCS/CASE)

Previously Known as Microchem® 4000 Model 301 Trousers Stitched & Tape Seams

MICROCHEM® 4000 is designed to provide an exceptional barrier against organic and inorganic chemicals and biological agents.
A unique multi-layer barrier fabric renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

• Elastication to waist and ankles.
• No pockets.
• Welded and taped seams.
• Sizes: S-2XL.
• Colour: Green.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect
• Silicone free

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Elasticated to waist and ankles, no pockets, welded and taped seams.

MICROCHEM® 4000 coveralls meet the following European Norms

•  Type 3 EN14605 Liquid tight suit.
•  Type 4 EN14605 Spray tight suit.
•  Type 5 EN ISO 13982-1 Dry particle suit.
•  EN14126 Barrier to infective agents.
•  EN1073-2 Barrier to radioactive particulates - Class 1.
•  EN1149-5 Anti-static.

Ultrasonically Welded & Taped Seams 

• A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquids and particulates. 

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 301 TROUSERS, STITCHED & TAPE SEAMS, ELASTICATED WAIST & ACKLES, X LARGE (25 PCS/CASE

Previously Known as Microchem® 4000 Model 301 Trousers Stitched & Tape Seams

MICROCHEM® 4000 is designed to provide an exceptional barrier against organic and inorganic chemicals and biological agents.
A unique multi-layer barrier fabric renowned for its lightweight, yet robust textile feel and exceptional barrier to organic & inorganic chemicals.

• Elastication to waist and ankles.
• No pockets.
• Welded and taped seams.
• Sizes: S-2XL.
• Colour: Green.

Features & Benefits

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect
• Silicone free

Applications

• Chemical handling / transportation.
• Oil-based mud protection.
• Hazardous waste remediation.
• Sewage purification installations.
• Industrial / tank cleaning.
• HAZMAT Emergency Response (i.e. Level B).
• Pharmaceutical.
• Mining.
• Agriculture.
• Suitable for use in EX Zones.

PRODUCT MATERIAL

• Multi-layer non woven barrier laminate fabric

DESIGN FEATURES

• Elasticated to waist and ankles, no pockets, welded and taped seams.

MICROCHEM® 4000 coveralls meet the following European Norms

•  Type 3 EN14605 Liquid tight suit.
•  Type 4 EN14605 Spray tight suit.
•  Type 5 EN ISO 13982-1 Dry particle suit.
•  EN14126 Barrier to infective agents.
•  EN1073-2 Barrier to radioactive particulates - Class 1.
•  EN1149-5 Anti-static.

Ultrasonically Welded & Taped Seams 

• A feature throughout the MICROCHEM® 4000 range, this seam technology is our highest barrier to liquids and particulates. 

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

Ansell AlphaTec® 4000-GR MODEL 600 OVERSLEEVES (150 PAIRS/CASE)

Previously Known as MICROCHEM® 4000, MODEL 600 OVERSLEEVES (150 PAIRS/CASE)

KEY FEATURES AND BENEFITS

• Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents
• Designed to protect
• Silicone free

Application 

• Chemical
• Life Sciences
• Mining
• Fire and Rescue
• Oil and gas

DESIGN FEATURES

• Elasticated at both ends and Welded seams.

STANDARDS OVERVIEW

• Not Certified PPE

PRODUCT REFERENCE

• 4000 Oversleeves - Model 600

SIZES

• One Size

WEIGHT

• 103gsm

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.