DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

TYVEK OR/BOUFFANT HAIR CAPS SIZE 21"

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DuPont™ Tyvek® 400 FC

DuPont™ Tyvek® 400 FC Shoe Cover with Tyvek® 400 FC Skid-Resistant Sole. 5" High. Serged Seams. Gray.

Tyvek® 400 FC -- a DuPont™ Tyvek® protective fabric with a skid resistant friction coating. Used exclusively for shoe and boot covers and skid-resistant booties in select Tyvek® coveralls.

• 5" shoe cover with elastic top
• Sole material composed of Tyvek® 400 FC, a special coating to provide added slip-resistance.
• One size fits most

*Have to purchase 1 carton - 100 pairs (200pcs)

Specifications

Name    Description

Full Part Number    FC450SGYxx0200yy (xx=size;yy=option code)  Help

Fabric / Material    Tyvek® 400 FC

Design    Shoe Cover

Seam    Serged

Color    Gray

Quantity/Box    200 per case

Sizes    00

Option Codes    00, NF

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DuPont™ Tyvek® 400, model TY466S WH Option SR. Knee-length (48cm) boot cover available in white and in one size. 

Stitched internal seams. Elasticated top and fixation ties. Slip-retardant sole.

Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.

Applications for Tyvek® 400 accessories include pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others.

Knee-length overboot available in one size

Antistatic treatment (EN 1149-1) - on inside; see footnotes

Specifications

Full Part Number	TYVPOBASWHA0
Fabric / Material	Tyvek® 400
Design	Overboot with slip-retardant sole
Seam	Stitched (internal)
Color	White
Sizes	One size
Quantity/Box	200 per box, bulk packed

DUPONT Tyvek Elastic Top Shoe Cover Plain White 200 Pairs/Case

DuPont Tyvek protective fabric with a skid resistant friction coating. Used exclusively for shoe and boot covers and skid-resistant booties in select Tyvek coveralls, Tyvek has a special coating to provide added slip resistance.

Features:

• Elastic opening
• The seams is serged
• Covers feet in a barrier that keeps out particles
• Elastic top helps secure cover to almost any size shoe

Specification:

• Brand: Tyvek
• Product Type: Shoe Cover
• Colour: Plain White
• Pack Size: 200 Pairs/Case
• Closure Type: Elastic Top
• Seams Style: Serged

DuPont™ Tyvek® 400 Lab Coat

Collar. Open Wrists. Extends Below Hip. Front Snap Closure. 2 Pockets. Serged Seams. White.

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Labcoat offers front snap closures for easy donning and doffing
• Provides enhanced frontal protection
• Laydown collar
• Open wrists
• Two front pockets for holding writing instruments, small tools or parts

Specifications

• Full Part Number    TY212SWHxx0030yy (xx=size;yy=option code)  Help
• Fabric / Material    Tyvek® 400
• Design    Lab Coat
• Seam    Serged
• Color    White
• Quantity/Box    30 per case
• Sizes    SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
• Option Codes    00, NF, VP

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DuPont™ Tyvek® 400 Lab Coat

Collar. Open Wrists. Extends Below Hip. Front Snap Closure. 2 Pockets. Serged Seams. White.

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Labcoat offers front snap closures for easy donning and doffing
• Provides enhanced frontal protection
• Laydown collar
• Open wrists
• Two front pockets for holding writing instruments, small tools or parts

Specifications

• Full Part Number    TY212SWHxx0030yy (xx=size;yy=option code)  Help
• Fabric / Material    Tyvek® 400
• Design    Lab Coat
• Seam    Serged
• Color    White
• Quantity/Box    30 per case
• Sizes    SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
• Option Codes    00, NF, VP

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DuPont™ Tyvek® 400 Lab Coat

Collar. Open Wrists. Extends Below Hip. Front Snap Closure. 2 Pockets. Serged Seams. White.

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Labcoat offers front snap closures for easy donning and doffing
• Provides enhanced frontal protection
• Laydown collar
• Open wrists
• Two front pockets for holding writing instruments, small tools or parts

Specifications

• Full Part Number    TY212SWHxx0030yy (xx=size;yy=option code)  Help
• Fabric / Material    Tyvek® 400
• Design    Lab Coat
• Seam    Serged
• Color    White
• Quantity/Box    30 per case
• Sizes    SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
• Option Codes    00, NF, VP

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DuPont™ Tyvek® 400 Lab Coat

Collar. Open Wrists. Extends Below Hip. Front Snap Closure. 2 Pockets. Serged Seams. White.

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

• Labcoat offers front snap closures for easy donning and doffing
• Provides enhanced frontal protection
• Laydown collar
• Open wrists
• Two front pockets for holding writing instruments, small tools or parts

Specifications

• Full Part Number    TY212SWHxx0030yy (xx=size;yy=option code)  Help
• Fabric / Material    Tyvek® 400
• Design    Lab Coat
• Seam    Serged
• Color    White
• Quantity/Box    30 per case
• Sizes    SM, MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
• Option Codes    00, NF, VP

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT™ TYVEK® 400 HOODED COVERALL, TY198SWH

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

Specifications

• Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.
• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle

About Dupont Tyvek

Dupont Tyvek is a unique, lightweight and breathable material. It resists water, abrasion and bacteria, making it amazing for a variety of PPE.

DUPONT TYVEK PL30NP LABCOAT

DuPont™ Tyvek® labcoat, model PL30NP. 5 press stud closures. Without pockets. Elasticated cuffs (not tunnelled). Stitched internal seams. 
Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.

Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others.

• PPE Category I
• Antistatic treatment (EN 1149-5) - on both sides; see footnotes

DUPONT TYVEK PL30NP LABCOAT

DuPont™ Tyvek® labcoat, model PL30NP. 5 press stud closures. Without pockets. Elasticated cuffs (not tunnelled). Stitched internal seams. 
Specially designed for use with Tyvek® apparel, Tyvek® accessories can help offer enhanced protection for body parts that are more exposed to hazardous substances.

Tyvek® garments and accessories are composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size), is ultra-low-linting and antistatically treated. Silicon non-added.

Applications include: pharmaceutical handling, chemical protection, lead and asbestos abatement/remediation, general maintenance/operations, spray painting and general clean-up, amongst many others.

• PPE Category I
• Antistatic treatment (EN 1149-5) - on both sides; see footnotes

AlphaTec® 1500 PLUS - Model 111

Previously known as: MICROCHEM® by AlphaTec® 1500 PLUS - Model 111

Breathable, anti-static SMS material, Type 5/6 protection

KEY FEATURES AND BENEFITS

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5

* KAKEN Particle penetration test 

Features & Benefits

• Proven protection, filters 99.9% of particles >3
  microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• * KAKEN Particle penetration test

Industries

• Industries
• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Applications

• Unpacking of bulk goods

• Loading and unloading of proces equipment

• Body Surface checking, marking and touching up

• Assembly & inspection of components

• Painting or cleaning tools or robots

• Production line support & maintenance

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• CE CATEGORY III (Type 5, Type 6, EN 1073-2, EN 1149-5)
• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 1500-WH PLUS COVERALL HOOD 111, LARGE (PACKING:40PCS/CSE)

Previously Known as Microgard 1500 Plus Chemical Protective White Coverall

MICROGARD® 1500 PLUS is a highly breathable anti-static SMS fabric which utilises the latest developments in micro-fibre technology to ensure good filtration efficiency
 

Features & Benefits

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• Optimized Body Fit - Improves wearer comfort and safety.
• *JSTIIF particle penetration test.
• Available in White, Light Blue & Navy.

Applications

• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 1500-WH PLUS COVERALL HOOD 111, MEDIUM (PACKING:40PCS/CSE)

Previously known as Microgard 1500 Plus Chemical Protective White Coverall

MICROGARD® 1500 PLUS is a highly breathable anti-static SMS fabric which utilises the latest developments in micro-fibre technology to ensure good filtration efficiency
 

Features & Benefits

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• *JSTIIF particle penetration test.
• Available in White, Light Blue & Navy.

Applications

• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

AlphaTec® 1500-WH PLUS COVERALL HOOD 111, SIZE SMALL (PACKING:40PCS/CSE)

Previously known as Microgard 1500 Plus Chemical Protective White Coverall

MICROGARD® 1500 PLUS is a highly breathable anti-static SMS fabric which utilises the latest developments in micro-fibre technology to ensure good filtration efficiency

Features & Benefits

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• *JSTIIF particle penetration test.
• Available in White, Light Blue & Navy.

Applications

• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 1500-WH PLUS COVERALL HOOD 111, X LARGE (PACKING:40PCS/CSE)

Previously known as Microgard 1500 Plus Chemical Protective White Coverall

MICROGARD® 1500 PLUS is a highly breathable anti-static SMS fabric which utilises the latest developments in micro-fibre technology to ensure good filtration efficiency
 

Features & Benefits

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• *JSTIIF particle penetration test.
• Available in White, Light Blue & Navy.

Applications

• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 1500-WH PLUS COVERALL HOOD 111, XX LARGE (PACKING:30PCS/CSE)

Previously known as Microgard 1500 Plus Chemical Protective White Coverall

MICROGARD® 1500 PLUS is a highly breathable anti-static SMS fabric which utilises the latest developments in micro-fibre technology to ensure good filtration efficiency

Features & Benefits

• Proven protection, filters 99.9% of  particles >3 microns*
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Optimised body fit, improving wearer comfort and safety
• Silicone free, critical in spray painting applications
• Anti-static, tested according to EN 1149-5
• *JSTIIF particle penetration test.
• Available in White, Light Blue & Navy.

Applications

• Machinery and Equipment
• Life Sciences
• Metal fabrication
• Construction
• Chemical

Stitched Seams

• Combining strength with particle barrier.

MICROGARD® 1500 PLUS coveralls meet the following European Norms

• Type 5 EN ISO 13982-1 Dry particle suit.
• Type 6 EN13034 Low level spray tight suit.
• EN1073-2 Barrier to radioactive particulates - Class 1.
• EN1149-5 Anti-static.

Specifications

MICROGARD® 1500 PLUS Technical Data

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>10	1 of 6
EN ISO 7854 Flex Cracking	>15,000	4 of 6
EN ISO 9073-4 Tear Resistance (MD)	>20N	2 of 6
EN ISO 9073-4 Tear Resistance (CD)	>20N	2 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN 1149-5 Anti-Static	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6

Fabric Repellence & Penetration Resistance to Liquid Chemicals

Repellence of Liquids	Result (%)	EN Class (EN 14325: 2004)
- 30% Sulphuric Acid	>95	3 of 3
- 10% Sodium Hydroxide	>95	3 of 3
Resistance to penetration by liquids	Result (%)	EN Class (EN 14325: 2004)
– 30% Sulphuric Acid	<1%	3 of 3
– 10% Sodium Hydroxide	<1%	3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, LARGE (PACKING : 40PCS/CSE)

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCI	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

AlphaTec® 2000-WH STD COVERALL HOOD 111, MEDIUM (PACKING : 40PCS/CSE)

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCl	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, SMALL (PACKING : 40PCS/CSE)

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCl	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, X LARGE (PACKING : 40PCS/CSE)

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCl	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, XX LARGE (PACKING : 40PCS/CSE)

Previously known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCl	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2000-WH STD COVERALL HOOD 111, 3X LARGE (PACKING : 40PCS/CSE)

Previously Known as Microgard 2000 Chemical Protective Coverall

MICROGARD® 2000 STANDARD provides both protection and comfort with exceptional liquid and particulate protection. Ideal for a wide range of industrial applications.

MICROGARD® 2000 is designed to allow water vapour (perspiration) to escape from the suit yet will withstand saturation of liquid chemicals and filter 100% of particulates down to 0.01 microns in size*

The use of a high quality two-way stretch microporous film provides an effective liquid and particle barrier combined with a high water vapour transmission rate from inside to outside.

Features & Benefits

• Proven protective barrier to low concentration liquid chemicals, liquid & particulate biological hazards
• Comfortable to wear featuring moisture vapor permeable fabric  (“breathable”) to help reduce the risk of heat stress
• Optimized body fit, improving wearer comfort and safety
• Anti-static, tested according to EN 1149-5
• Low linting to help reduce the risk of cross contamination in critical areas
• Silicone free, critical in spray painting applications

Applications

• Life Sciences
• Automotive
• Metal fabrication
• Food Processing
• Defense

Bound Seams

• Superior strength, liquid and particle barrier.

MICROGARD® 2000 COMFORT coveralls meet the following European Norms

•  Type 5 EN ISO 13982-1 Dry particle suit
•  Type 6 EN13034 Low level spray tight suit
•  EN14126 Barrier to infective agents
•  EN1073-2 Barrier to radioactive particulates - Class 2
•  EN1149-5 Anti-static and
•  DIN 32781 - Protection agaisnt Pesticides

Specifications

MICROGARD® 2000 Technical Data

MICROGARD® 2000 is extensively tested in accordance with statutory requirements, including physical performance attributes and barrier to hazardous substances. The following tables outline the results obtained in independent laboratories according to European test methods.

Test Method	Result	EN Class (EN 14325: 2004)
EN 530 Abrasion	>100	2 of 6
EN ISO 7854 Flex Cracking	>40,000	5 of 6
EN ISO 9073-4 Tear Resistance (MD)	>40N	1 of 6
EN ISO 9073-4 Tear Resistance (CD)	>10N	1 of 6
EN ISO 13934-1 Tensile Strength (MD)	>60N	1 of 6
EN ISO 13934-1 Tensile Strength (CD)	>30N	1 of 6
EN 863 Puncture Resistance	>5N	1 of 6
EN ISO 13938-1 Burst Resistance	>160Pa	3 of 6
EN 1149-5 Electrostatic Properties (Surface resistivity	<2.5 x 109	-
ISO 13935-2 Seam Strength	>75N	3 of 6
BS EN 20811 Hydrostatic Head (water pressure test)	>200cm	-
EN 31092/ISO 11092 Thermal Resistance (Rct in m²·K/W)	<15 m2•Pa/W	-
EN 31092/ISO 11092 Water Vapour Resistance (Ret in m²·Pa/W)	<20•10-3m2•K/W	3 of 3 (DIN 32781)

EN ISO 6529: 2001 Chemical Permeation Barrier

Chemical	CAS Number	EN Class	EN Class (EN 14325: 2004)
Glycerol	56-81-5	>480	6 of 6
HCl	25316-40-9	>480	6 of 6

 

Fabric Repellence & Penetration - Resistance to Liquid Chemicals	White & Green Result (%)	EN Class	Yellow Result (%)	EN Class
Repellence of Liquids - 30% Sulphuric Acid	>95	3 of 3	>90	2 of 3
Repellence of Liquids - 10% Sodium Hydroxide	>95	3 of 3	>95	3 of 3
Repellence of Liquids - o-Xylene	>95	3 of 3	>80	1 of 3
Repellence of Liquids - Butan-1-ol	>90	2 of 3	>95	3 of 3
Resistance to penetration by liquids - 30% Sulphuric Acid	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids - 10% Sodium Hydroxide	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – o-Xylene	0.0	3 of 3	0.0	3 of 3
Resistance to penetration by liquids – Butan-1-ol	0.0	3 of 3	0.0	3 of 3

MICROGARD® 2000 when tested in accordance with EN 14126: 2003 demonstrates an excellent barrier to infective agents.

EN14126: 2003 - Barrier to Infective Agents	Result	EN Class
ISO 16603 Resistance to penetration by blood/fluids under pressure	Pass to 20kPa	Class 6 of 6
ISO 16604 Resistance to penetration by blood borne pathogens	Pass to 20kPa	Class 6 of 6
EN ISO 22610 Resistance to wet bacterial penetration (mechanical contact)	No penetration (up to 75 mins)	Class 6 of 6
ISO/DIS 22611 Resistance to biologically contaminated aerosols	No penetration	Class 3 of 3
ISO 22612 Resistance to dry microbial penetration	No penetration	Class 3 of 3

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

AnsellAlphaTec® 2500-WH STD HOOD 503 (200 PCS/CASE)

Previously Known as Microgard 2500 Hood

MICROGARD® 2500 hood is a unique material offering exceptional mechanical strength, liquid and particulate protection.
MICROGARD® 2500 hood achieves the highest levels of protection according to EN14126: 2003 for barrier to infective agents.

• Balaclava Style.
• Elasticated face opening.
• Bound seams.

Features & Benefits

• The fabric achieves the highest classifications for protection from biological agents in accordance with EN 14126 for penetration of blood, body fluids and blood-borne pathogens
• Unique material offering exceptional strength, liquid and particulate protection
• Low linting reduces risk of contamination in critical areas

Applications

• Viral contaminated areas (including Avian Influenza).
• Biological protection.
• Emergency medical response.
• Medical research.
• Chemical and pharmaceutical industries.
• Low pressure industrial cleaning.
• Industrial paint spraying.
• Nuclear industry.
• Life Sciences
• Industrial
• Chemical

Stitched & Taped Seams

• Increased strength and an effective liquid & particle barrier.

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

Ansell AlphaTec® 2500-WH PLUS MODEL 111 C/W 3 PIECE HOODS COVERALL,TAPED SEAMS PLUS 2 WAY ZIP - LARGE (35PCS/BOX)

Previously Known as Microgard 2500 Plus

MICROGARD® 2500 PLUS is a unique material offering exceptional mechanical strength, liquid and particulate protection.
MICROGARD® 2500 PLUS achieves the highest levels of protection according to EN14126: 2003 for barrier to infective agents.

• 3-piece hood.
• Elasticated hood, wrist, waist and ankles.
• 2-way front zip with resealable storm flap.
• Finger loops.

Features & Benefits

• Achieves the highest classifications for protection from biological agents in accordance with EN 14126 and ASTM F 1671 for penetration of blood, body fluids and blood-borne pathogens
• Type 3-B liquid tight certified
• Air and water vapour permeable (breathable) fabric helps reduce the risk of heat stress
• Ultra low linting to help reduce the risk of cross contamination in critical areas
• Anti-static, tested according to EN 1149-5
• Stitched and taped seams provides increased strength and an effective liquid and particle barrier

Applications

• Viral contaminated areas (including Avian Influenza).
• Biological protection.
• Emergency medical response.
• Medical research.
• Chemical and pharmaceutical industries.
• Low pressure industrial cleaning.
• Industrial paint spraying.
• Nuclear industry.
• Life Sciences
• Chemical
• Food Processing
• Industrial
• Law Enforcement

Stitched & Taped Seams

• Increased strength and an effective liquid & particle barrier.

About Ansell Alphatec Microgard

Ansell AlphaTec® protective coverall is a good barrier against a wide range of chemicals and biological hazards.

 

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Respirex Limited Life Gas Tight Suit

This fully encapsulating Type 1A - ET limited life gas tight suit is designed to protect the emergency responder against toxic, corrosive gases, liquids and solid chemicals.

The suit is manufactured in DuPont™ Tychem® TK, a high performance, seven layer, nonwoven, chemical barrier fabric that is also light in weight.

• Fully encapsulating design to allow breathing apparatus to be worn inside the suit.
• Heavy duty 122cm (48”) long gas tight zip, fitted to the right hand side of the suit - flap with a hook and loop fastener fitted to cover the teeth of the zip.
• Adjustable internal support belt and bat-wing sleeves for optimal wearer comfort.
• Flexible, multi-laminated, anti-mist visor giving clear undistorted vision.
• Seams welded and double taped  .
• Dual glove system consisting of a  chemically protective laminated inner glove bonded to an outer neoprene glove for mechanical protection.
• Gloves fitted by means of Respirex locking cuff.
• Integral socks with outer splash guards or Hazmax™ FPA safety boots - Exclusive to Respirex, these boots are highly chemically resistant and are CE marked to EN ISO 20345:2004 and EN345-2:1996.
• Exhalation valves ensure that the pressure change within the suit does not exceed 400 pascals in one minute.
• Tested to EN464 prior to despatch for leak-tightness.
• Pressure test required annually from year five or after each use.

Features

EN943-2:2002

Suitable for emergency team use the suit is approved to EN943-2:2002 Type 1a ET, and has been tested for the 15 chemicals listed in EN943-2:2002.

Shelf Life

Suit can be safely used for up to 10 years after manufacture provided testing and maintenance is carried out in accordance with the user instructions.

Maintenance Free

Maintenance free for first five years unless used (in which case the suit must be tested after use and then pressure tested annually).

Specifiations

Material Resistance:

• EN14126:2003 Protective clothing against infective agents.
• FINABEL 0.7.C Chemical Warfare Agents.

Options available at time of order:

• Air pass-through.
• Attachments for lifeline, torch, anchor point, Diktron and Firefly DSU’s.

Accessories and maintenance

• Hazbag Decontamination Bag.
• Citrikleen; Cleaning Solution.
• MaxWax; zip lubricant.
• Fog Off; visor cleaner.
• Synodor; suit hygene treatment and odour neutraliser.
• Training Suit.

About Respirex

Respirex specialises in high performance chemical and respiratory protective suits for emergency responders. they also provide specialist protective footwear.

Worksafe Microvek Polypropylene Coverall - 8100B

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100B

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100B

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100B

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100W

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100W

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100W

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Worksafe Microvek Polypropylene Coverall - 8100W

• An ideal solution for non-hazardous and grimy work environments.
• Low cost disposable garment for lighweight application.
• Breathable and comfortable.
• Size available in M, L, XL, 2XL.

Ansell AlphaTec® 1500 STANDARD CHEMICAL PROTECTIVE WHITE COVERALL, MEDIUM (PACKING:50PCS/CSE)

Formally Known as MICROGARD® 1500 coverall

MICROGARD® 1500 coveralls have been designed for workers involved in the stripping, clear up or handling of asbestos, general maintenance, construction and contract cleaning.

Features & Benefits

• Protection - Proven to filter 100% of  particles >3 microns*
• Comfort - Air and water vapour permeable (breathable) to help reduce the risk of heat stress
• Silicone Free - critical in spray painting applications
• Optimised body fit - improves wearer comfort and safety

Application 

• Inspection (picking, checking and marking)
• Asbestos Related Work
• Handling of powders

PRODUCT MATERIAL

• SMS fabric

DESIGN FEATURES

• Coverall, 3-piece hood, elasticated hood, wrists, waist and ankles. 2-way front zipper with re-sealable storm flap.

SEAM TYPE

• Stitched and Taped

STANDARDS OVERVIEW

• CE CATEGORY III (Type 5, Type 6, EN 1073-2)

Tyvek® 400 HOODED COVERALL, TY127SWH, WHITE, SIZE 2XL, 25 PCS BULK PACK

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.

• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.

Tyvek® 400 HOODED COVERALL, TY127SWH, WHITE, SIZE XL, 25 PCS BULK PACK

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.

• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.

Tyvek® 400 HOODED COVERALL, TY127SWH, WHITE, SIZE M, 25 PCS BULK PACK

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.

• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.

Tyvek® 400 HOODED COVERALL, TY127SWH, WHITE, SIZE L, 25 PCS BULK PACK

Tyvek® 400 garments are composed of flash spun high density polyethylene which creates a unique, nonwoven material available only from DuPont. Tyvek® 400 provides an ideal balance of protection, durability and comfort of any limited use fabric technology. Tyvek® 400 fabric offers an inherent barrier against particles (down to 1.0 micron in size). Protection is built into the fabric itself; there are no films or laminates to abrade or wear away. Tyvek® 400 fabric's durability advantage over microporous film fabrics delivers consistently better barrier, even after wear and abrasion. Applications include: lead and asbestos abatement/remediation, general maintenance/operations, spray painting, general clean-up.

Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.

• Attached respirator-fit hood with elastic around face opening, designed to cover neck and chin and fit around respirator face mask
• Longer zipper extends to chin for complete coverage of neck area
• Elastic opening for tighter fit at wrist
• Elastic opening for tighter fit at ankle
• Stormflaps.