ALLEGRO LOW PROFILE METAL VENTURI BLOWER

INVENTORY CODE: 960OTH9518‐03S
       
BRAND: ALLEGRO INDUSTRIAL
(Available Stock: SG 0 PIECE)
Piece:
Description

ALLEGRO LOW PROFILE METAL VENTURI BLOWER

Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi or pulling action that creates large volumes of air through the Venturi and out the air diffuser.

A 1/2” hose with a “crows foot” connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.

  • Lightweight construction
  • Convenient carry handles for one-person portability to any location
  • No guards required
  • Multiple inlet ports
  • Sturdy steel galvanized steel diffuser
  • All models include a crow’s foot inlet connection
  • Static ground connection attached to the inlet housing (for use in hazardous locations)
  • Single piece cast aluminum inlet housing
Inlet Pressure
40 PSIG 60 PSIG 80 PSIG
Air Consumed 36 SCFM 50 SCFM 62 SCFM
Total Air Flow 815 CFM 981 CFM 1182 CFM
Free Air Induction Rates 28.83  27.00 24.10
Overall Length (cm) 42.54
Diameter of Base (cm) 18.56
Diameter Top of Horn (cm) 15.24
NPT Size (cm) 1.27
Bolt Circle Diameter (cm) 16.66
Bolt Slot Diameter (cm) 1.01
Net Weight (KG) 2.49