ELVEX IMPULSE FILTER ELECTRONIC MUFF FOLDABLE, 25 NRR, STORAGE BAG

Elvex Impulse foldable ear muff is equipped with noise suppression and communications circuitry. Users are getting impulse noise (such as gun fire) suppression, while the electronic circuitry simultaneously enhances weak sounds, such as an instructors voice. Sounds exceeding 82 dB are suppressed by a gain limiter 

• Elvex Impulse is a foldable hearing protector with 25 dB NRR. A heavy duty nylon case is included 

• The hearing protector has two external microphones and two independent volume controls, positioned on the two ear cups. Each ear cup is equipped with its own electronic circuitry, thus requiring no wires between the two ear cups. The sound reception is stereophonic, with maintained directional hearing. 

• An electronic gain limiter limits the sound produced inside the headset to 82 dB, in order to maintain hearing protector integrity. 

• An impulse filter makes Elvex Impulse very effective on the shooting range. The gun shots are eliminated, but the shooting instructor can still be heard. 

• An audio jack (3.5 mm jack) for connection of radios is standard. This jack will provide listen-only capability (not two way communications). You can hear both the auxiliary device and Com-550.

 • Elvex Com-550 uses four 1.5 Volt AAA batteries, two on each side. Batteries are included. The headset will operate for approximately 200 hours on one set of batteries, under normal circumstances. An auto off switch will turn off the headset after four hours in order to conserve battery use.

ELVEX DeTUNE COMMUNICATION MUFF, 2 FILTERS, 25 NRR

Voice communication in noisy environments has always presented a number of challenges. Elvex DeTune provides effective hearing protection, and allows the user to adjust the frequency range of the sound that is transmitted through the speakers. 

• A volume control allows the user to set the sound level inside the headset, up to a maximum of 82 dB.

 • Two control knobs allow the user to filter out the high and the low frequencies independently of each other. When the filters are in the inactive position the user will hear the environment almost as if no hearing protector was worn, except for the maximum sound limiter. 

• When filtering is applied the internal sound volume is kept constant by an automatic gain control (AGC). 

• The high frequency filter allows an aggressive filtering of the high frequencies, down to about 3,000 Hz. The filter eliminates about 75% of the high frequencies within the adjustment range, and can be considered semi-transparent. If used in an environment dominated by high frequency noise, it can be clearly perceived that the headset filters out a large part of the undesirable noise. The most important speech frequencies are in the range of 500-3.000 Hz., and we are attempting to filter out most frequencies outside of this range. Elvex DeTune does however provide a choice to the user in how much filtering is desirable, and allows the user to seek out the filtering level that is optimal for the environment. 

• The low frequency filter works in a similar fashion, allowing the user to filter out frequencies up to 600 Hz. The effectiveness of the low frequency filter is not as obvious as the high filter. 

• DeTune is also equipped with an impact filter. This filter is activated by impact sounds, such as gunfire or rivet operations. The impact filter closes in a few microseconds and reactivates in about half a second. • Com-640 is equipped with an automatic 4-hour shutoff in order to conserve batteries. 

• This headset uses two AAA alkaline batteries, and they are accessible from an exterior battery compartment. 

• An audio jack (3.5 mm) for connection of radios and MP3 players is standard. This jack will provide listenonly capability (not two way communications). 

• It is important to understand that the electronics in the DeTune hearing protector does not improve the attenuation properties of the passive hearing protector. The electronics simply allow improvement of voice communication and speech understanding, while you continue to protect your hearing.

Elvex Level Dependent™ Com-655 With Impulse Filter

Level Dependent™ allows close range communications in continuous or impulse noise environments. Provides excellent sound quality and performance, no choppy sounds. Lightweight design, provides comfort over long periods.

PRODUCT USE - Risks

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry, Light industry, Services / Logistics, Hygiene environment, Oil / Gas, Mining,Wind/Energy.
• RISKS : Noise

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS

• The microphone listens to the environment and amplifies weak sounds, plus it suppresses impulse noise exceeeding 82 dB.
• An audio jack (3.5 mm jack) for connection of MP3 Players and Radios is standard and provides listen-only capability.
• Low force, fork-type stainless steel headband offers the lowest and consistent pressure on wearer’s head.
• 4-hour automatic shutoff to conserve batteries. Uses two 1.5 Volt AAA alkaline batteries providing up to 175 hours of usage.
• Soft cushioned headband for all day wear and ear cushions are replaceable.

CERTIFICATIONS AND STANDARDS

USA STANDARDS.

• ANSI S12.6 Hearing Protection Attenuation Standard.
• ANSI S3.19 National Institute of Standards. 25 NRR-NRR – (Noise Reduction Rating - Noise Reduction Rating). This standard establishes the test method that allows to establish the level of noise attenuation (NRR Noise Reduction Rating) of a hearing protector, according to the recommendations of the EPA (United States Environmental Protection Agency).

Specifications

Elvex Sonicslim™ Low Profile Foldable Ear Muff

The SonicSlim™ low profile and sleek designed ear muff fits in the palm of your hand! Slim profile makes it ideal in confined spaces and for sports shooting as well. Reach a higher performance when "doubling" up with ear plugs and achieve 26 NRR.

PRODUCT USE - RISKS

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry,Light industry, Services / Logistics, Hygiene environment, Oil / Gas, Mining, Wind/Energy.
• RISKS : Noise

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS

• Top of the line headband cushion provides a high level of comfort.
• Folds to less than 5 inches wide, compact and easy to store.
• Soft, SuperSeal™ ear cushions are long lasting, resists body oil and sweat for all-day comfort.
• Ultra lightweight, at 8.1 ounces only (230 grams)

CERTIFICATIONS AND STANDARDS

USA STANDARDS

• ANSI S12.6 Hearing Protection Attenuation Standard.
• ANSI S3.19 : 21 NRR - NRR – (Noise Reduction Rating - Noise Reduction Rating).

Specifications

Elvex Valuemuff™ Dielectric Ear Muff With Indestructible Headband And Smart Fold-Out Design

The ValueMuff™ is our lightweight ear muff with an unbreakable multi-position headband. Rugged, fully dielectric construction protects workers from electrical shocks and shorts.

PRODUCT USE - RISKS

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry, Light industry, Services / Logistics, Hygiene environment, Oil / Gas, Mining,Wind/Energy.
• RISKS : Noise

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS

• Comfortable, yet tough unbreakable multi-position headband.
• Exclusive ELVEX® “smart fold-out” design, muffs fold-out and rest comfortably around neck when not in use.
• Self-aligning suspension on headband for quick fitting and adjustment.
• Soft, pliable SuperSeal™ ear cushions are long lasting and resist body oil and sweat.
• Multi-position use with or without optional support strap for compatibility when worn with other hats.

CERTIFICATIONS AND STANDARDS

USA STANDARDS

• ANSI S12.6 Hearing Protection Attenuation Standard.

• ANSI S3.19 National Institute of Standards. 25 NRR : NRR – (Noise Reduction Rating - Noise Reduction Rating)

 EN352-1 Earing protection : Ear-muff  

• 28 SNR : Standard noise reduction.
• H 30     : High frequency attenuation.
• M 25     : Medium frequency attenuation.
• L 17      : Low frequency attenuation.

Specifications

Elvex Maximuff™ High Performance Dielectric Ear Muff With Indestructible Headband And Smart Fold-Out Design

The MaxiMuff™ is a high performance ear muff, providing hearing protection in the most challenging environments without sacrificing comfort. Rugged, fully dielectric construction protects workers from electrical shocks and shorts.

PRODUCT USE -Risks

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry, Light industry, Services / Logistics, Hygiene environment, Oil / Gas, Mining, Wind/Energy.
• RISKS : Shock, Electrical

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS

Specifications

ELVEX SUPERSONIC, SUPERSEAL, 29 NRR GREEN

Elvex SuperSonic muff is one of only a few ear muffs that have achieved a 29 dB NRR rating at an independent and certified laboratory in accordance with ANSI S3.19-1974. Superior performance has been achieved in these measurable criteria: 

• 29 dB Certified NRR to ANSI S3.19-1974 

• New generation has improved attenuation over the full frequency range 

• The SuperSonic muff has one of the lowest weights in its class 

• SuperSonic has low headband force, and a pressure equalizing headband provides even fit and seal for a wide variety of facial configurations and sizes 

• SuperSealTM ear cushions provide outstanding seal and comfort 

• A flexible suspension allows muffs to automatically adjust to facial shape 

• A dielectric construction for environments with exposure to high voltage situations 

Elvex Quicksnap™ Cap Mount Ear Muffs Hm-2029 Medium Profile With Exclusive Cut-Out Design To Fit Under Safety Caps

QuickSnap™ Cap Mount Ear Muff the solution for combining head, face and hearing protection. Offers adaptability, functionality and high noise reduction properties. Integrates to most brand safety caps for the ultimate in hearing protection, user-flexibility and comfort. Fits Elvex Tectra, Jackson, MSA V-Guard, American All Safe and Sellstrom safety caps. You can easily combine our Cap Mount Ear Muffs with a variety of head and face protection without any tools. Comfortable for all-day wear; lighter than most other muffs. Comes with BR-29 blade which is an integrated part of the muff arm assembly and there are no separate parts to purchase. All ELVEX® cap mount muffs accepts ELVEX® Visor Brackets and shields.

PRODUCT USE - RISKS

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry, Light industry, Services / Logistics, Hygiene environment, Oil / Gas, Mining, Wind/Energy.
• RISKS : Noise

PRODUCT'S HIGHLIGHTS & USER'S BENEFITS

• Medium profile cap mounted ear muff, with unique cut-out design to nest and fit under rim of caps.
• Soft, pliable SuperSeal™ ear cushions are long lasting and resist body oil and sweat.
• There are 2 Rest positions: Flip Out muffs for short term break or Flip Up on top of safety cap
• Construction is Dielectric and lightweight. 8.1 oz., 230g.
• Hard hat slot opening is 29 mm.

CERTIFICATIONS AND STANDARDS

USA STANDARDS

• ANSI S12.6 Hearing Protection Attenuation Standard.
• ANSI S3.19  National Institute of Standards. 25 NRR:NRR – (Noise Reduction Rating - Noise Reduction Rating)This standard establishes the test method that allows to establish the level of noise attenuation (NRR Noise Reduction Rating) of a hearing protector, according to the recommendations of the EPA (United States Environmental Protection Agency).

Specifications

ELVEX LOW PROFILE MUFF, 25DB NRR

Medium profile cap mount earmuff (230 g) with 25 dB NRR 

Elvex QuickSnap cap mount ear muffs have for many years been the best selling brand. This is probably due to the product’s functionality; high noise reduction properties, dielectric construction and the ability to combine cap mount muffs with a full range of face protection products. 

This is the third generation of cap mount muffs. 

• Construction is dielectric, certified by independent testing. 

• Two integrated rest positions are provided. Flip out muffs for short term break, or flip them up for permanent storage on top of safety cap. 

• Most lightweight construction. Product weighs from 7.5 oz - 9.4 oz.. Competitive models often weigh substantially more. 

• Arm assembly with universal blade (example, HM-6093) mounts to most slotted safety caps. Blade is an integrated part of the muff arm assembly and there are no separate parts to purchase. Remove slot filler for narrower slots (MSA). 

• Muffs can be mounted onto un-slotted safety caps and bump caps with QuickSlot™ adaptor, which creates an accessory slot. System remains dielectric.

Elvex Quicksnap™ Cap Mount Ear Muffs - HM-8029

Quicksnap™ Cap Mount Ear Muffs HM-8029 Supersonic™ Larger Profile With Exclusive Cut-Out Design Fits Under Safety Caps.

PRODUCT USE/RISKS

Specifications

Elvex Quicksnap™ Cap Mount Ear Muffs-HM-8093

Quicksnap™ cap mount ear muffs hm-8093 supersonic™ larger profile with exclusive cut-out design fits under safety caps.

Our QuickSnap™ Cap Mount Ear Muffs offers adaptability, functionality and high noise reduction properties. Fits to most brand safety caps for the ultimate in hearing protection, user-flexibility and comfort. Highest NRR Rating for cap muffs available. Fits Elvex Tectra, Jackson, MSA V-Guard, American All Safe and Sellstrom safety caps.

You can easily combine our Cap Mount Ear Muffs with a variety of head and face protection without any tools.Comfortable for all-day wear; lighter than most other muffs.Comes with BR-93 blade which is an integrated part of the muff arm assembly and there are no separate parts to purchase.All ELVEX® cap mount muffs accepts ELVEX® Visor Brackets and shields.

PRODUCT USE/RISKS

• Agriculture / Green areas, Construction / Civil engineering, Second work / craftman, Heavy industry, Light industry,Services / Logistics, Hygiene environment, Oil / Gas, Mining, Wind/Energy.
• RISKS : Noise

Specifications

Howard Bilsom Leighning L3 Muff

FEATURES

AIR FLOW CONTROL™ TECHNOLOGY
Howard Leight's patented Air Flow Control delivers optimal attenuation across all frequencies, without increasing earcup size or weight. A patented baseplate chamber and high-tech non-woven layer manage the flow of air inside the earmuff to control how sound reaches the ear. The result is better, more consistent overall attenuation for virtually all industrial noise environments. Air Flow Control is a standard feature on all Leightning series earmuffs.

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Robust steel headband withstands demanding use, especially in tough environments
• Snap-in ear cushions make replacement quick and easy
• Padded foam headband delivers superb comfort with minimal pressure on the head
• Three attenuation levels allow for targeted attenuation for a variety of applications
• Telescopic height adjustment remains fixed during use
• Delivers high degree of comfort; ideal for situations where compact earmuffs and reliable Noise-Blocking protection are required.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North^® Hard Hats.

Specifications

Howard Bilsom Viking V1 Muff

FEATURES

• Multiple-position over-the-head, behind-the-head or under-the-chin
• Wear when using other PPE
• Patented Air Flow Control™ technology delivers optimal attenuation across all frequencies, without increasing earcup size or weight
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates
• Snap-in ear cushions make replacement quick and easy
• Elastic headband strap for better positioning when worn behind-the-head or under-the-chin
• Dielectric construction suitable for electrical environments.

Specifications

Howard Bilsom Viking V1 Muff

FEATURES

• Multiple-position over-the-head, behind-the-head or under-the-chin
• Wear when using other PPE
• Patented Air Flow Control™ technology delivers optimal attenuation across all frequencies, without increasing earcup size or weight
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates
• Snap-in ear cushions make replacement quick and easy
• Elastic headband strap for better positioning when worn behind-the-head or under-the-chin
• Dielectric construction suitable for electrical environments.

Specifications

Howard Bilsom Viking V3 Muff

FEATURES

PATENTED AIR FLOW CONTROL™ TECHNOLOGY

Howard Leight's patented Air Flow Control delivers optimal attenuation across all frequencies, without increasing earcup size or weight. A patented baseplate chamber and high-tech non-woven layer manage the flow of air inside the earmuff to control how sound reaches the ear. The result is better, more consistent overall attenuation for virtually all industrial noise environments. Air Flow Control is a standard feature on all Viking series earmuffs.

• Multiple-position over-the-head, behind-the-head or under-the-chin
• Wear when using other PPE
• Patented Air Flow Control™ technology delivers optimal attenuation across all frequencies, without increasing earcup size or weight
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates
• Snap-in ear cushions make replacement quick and easy
• Elastic headband strap for better positioning when worn behind-the-head or under-the-chin
• Dielectric construction suitable for electrical environments.

Specifications

Howard Bilsom Thunder T1 Muff

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Dielectric construction suitable for all workplaces, especially electrical environments
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear
• Non-deforming outer headband withstands rough treatment
• Quick-Click height adjustment remains fixed during wear
• Snap-in ear cushions make replacement quick and easy
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North® Hard Hats.

Specifications

Howard Bilsom Thunder T3 Muff

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Dielectric construction suitable for all workplaces, especially electrical environments
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear
• Non-deforming outer headband withstands rough treatment
• Quick-Click height adjustment remains fixed during wear
• Snap-in ear cushions make replacement quick and easy
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North® Hard Hats.
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates.

Specifications

Howard Bilsom Clarity C3 Muff

FEATURES

• Uniform attenuation allows wearers to hear co-workers, instructions, warning sounds and other important sounds more naturally while attenuating harmful noise.
• Dielectric construction suitable for electrical environments warning sounds and other important sounds more naturally while attenuating harmful noise.
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear.
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates.
• Non-deforming outer headband withstands rough treatment in the toughest workplaces.
• Quick-Click height adjustment remains fixed during wear.
• Snap-in ear cushions make replacement quick and easy.

Specifications

Howard Bilsom Clarity C3H Helmet Attach EarMuff

FEATURES

• Uniform attenuation allows wearers to hear co-workers, instructions, warning sounds and other important sounds more naturally while attenuating harmful noise.
• Dielectric construction suitable for electrical environments warning sounds and other important sounds more naturally while attenuating harmful noise.
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear.
• Inner-ventilated headband minimizes pressure on the head, breathes easier in warm/humid climates.
• Non-deforming outer headband withstands rough treatment in the toughest workplaces.
• Quick-Click height adjustment remains fixed during wear.
• Snap-in ear cushions make replacement quick and easy.

Specifications

Howard Bilsom Thunder T1 Muff Helmet

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Dielectric construction suitable for all workplaces, especially electrical environments.
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear.
• Non-deforming outer headband withstands rough treatment.
• Quick-Click height adjustment remains fixed during wear.
• Snap-in ear cushions make replacement quick and easy.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North® Hard Hats.
• Earcups snap into place during use and swing back when not in use.
• Includes SKU #13910096 Hard Hat Adapter for AO Safety, Bullard, Jackson, MSA, North (Adapter 3718).
• All EM cap-mounted earmuffs include Adapter CP5007 for North.

Specifications

Howard Bilsom Thunder T2H Muff Helmet

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Dielectric construction suitable for all workplaces, especially electrical environments.
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear.
• Non-deforming outer headband withstands rough treatment.
• Quick-Click height adjustment remains fixed during wear.
• Snap-in ear cushions make replacement quick and easy.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North® Hard Hats.
• Earcups snap into place during use and swing back when not in use.
• Includes SKU #13910096 Hard Hat Adapter for AO Safety, Bullard, Jackson, MSA, North (Adapter 3718).
• All EM cap-mounted earmuffs include Adapter CP5007 for North.

Specifications

Howard Bilsom Thunder T3H Muff Helmet

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Dielectric construction suitable for all workplaces, especially electrical environments.
• Uniform headband pressure for all head sizes, providing better comfort for long-term wear.
• Non-deforming outer headband withstands rough treatment.
• Quick-Click height adjustment remains fixed during wear.
• Snap-in ear cushions make replacement quick and easy.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North® Hard Hats.
• Earcups snap into place during use and swing back when not in use.
• Includes SKU #13910096 Hard Hat Adapter for AO Safety, Bullard, Jackson, MSA, North (Adapter 3718).
• All EM cap-mounted earmuffs include Adapter CP5007 for North.

Specifications

Howard Bilsom Leightning L1N Muff Neckband 

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easy.
• Padded foam headband delivers superb comfort with minimal pressure on the head.
• Three attenuation levels allow for targeted attenuation for a variety of applications.
• Telescopic height adjustment remains fixed during use.
• Delivers high degree of comfort; ideal for situations where compact earmuffs and reliable Noise-Blocking protection are required.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North^® Hard Hats.
• Sleek, anatomical behind-the-neck design for use with face shields, visors, hard hats and other PPE.

Specifications

Howard Bilsom Leightning L2F Muff Folding

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easy.
• Padded foam headband delivers superb comfort with minimal pressure on the head.
• Three attenuation levels allow for targeted attenuation for a variety of applications.
• Telescopic height adjustment remains fixed during use.
• Delivers high degree of comfort; ideal for situations where compact earmuffs and reliable Noise-Blocking protection are required.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North^® Hard Hats.

Specifications

Howard Bilsom Leightning L0N Muff Neckband

FEATURES

Howard Leight Cap-Mounted Earmuffs now work with North^® Hard Hats and Face shields. These earmuffs have been engineered to seamlessly integrate with hard hats and face shields to provide an effective unit for worker head and hearing protection.

• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easy.
• Padded foam headband delivers superb comfort with minimal pressure on the head.
• Three attenuation levels allow for targeted attenuation for a variety of applications.
• Telescopic height adjustment remains fixed during use.
• Delivers high degree of comfort; ideal for situations where compact earmuffs and reliable Noise-Blocking protection are required.
• Helmet earmuffs available to fit a variety of hard hats, including Honeywell North^® Hard Hats.
• Sleek, anatomical behind-the-neck design for use with face shields, visors, hard hats and other PPE.

Specifications

Howard Bilsom Leightning L3 HI-Visibility Muff

FEATURES

• Bright green earcups provide high visibility and contrast.
• Reflective padded headband illuminates under light for increased visibility and safety.
• Ideal to wear at night, during the day, in low light and under inclement weather conditions.
• Patented Air Flow Control™ technology provides optimal attenuation across all frequencies.
• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easyPadded foam headband delivers long-wearing comfort with minimal pressure on the head.
• Telescopic height adjustment remains fixed during use.
• L3HV reflective headband and high-visibility earcups provide high visibility that is ideal to wear at night, during the day, in low light and under inclement weather conditions.

Specifications

Howard Bilsom Leightning L2FHV Muff Folding

FEATURES

• Bright green earcups provide high visibility and contrast.
• Reflective padded headband illuminates under light for increased visibility and safety.
• Ideal to wear at night, during the day, in low light and under inclement weather conditions.
• Patented Air Flow Control™ technology provides optimal attenuation across all frequencies.
• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easyPadded foam headband delivers long-wearing comfort with minimal pressure on the head.
• Telescopic height adjustment remains fixed during use
• Convenient folding design for easy storage less than 4” wide (0.1016 meters)

Specifications

Howard Bilsom Leightning L1HHV Muff Helmet

FEATURES

• Bright green earcups provide high visibility and contrast.
• Reflective padded headband illuminates under light for increased visibility and safety.
• Ideal to wear at night, during the day, in low light and under inclement weather conditions.
• Patented Air Flow Control™ technology provides optimal attenuation across all frequencies.
• Robust steel headband withstands demanding use, especially in tough environments.
• Snap-in ear cushions make replacement quick and easyPadded foam headband delivers long-wearing comfort with minimal pressure on the head.
• Telescopic height adjustment remains fixed during use.

Specifications

Super Compact Folding Ear Muffs

Never before has such a high attenuating ear muff been available in such a small package LM-77 is super compact for easy storage when not in use. Noise reduction rating NRR 28 dB, SNR 32 dB. Available in Cobalt Blue (LM-77-FBU)or Rocket Red (LM-77-FRD). CSA A(L)

Super Compact Folding Ear Muffs

Never before has such a high attenuating ear muff been available in such a small package LM-77 is super compact for easy storage when not in use. Noise reduction rating NRR 28 dB, SNR 32 dB. Available in Cobalt Blue (LM-77-FBU)or Rocket Red (LM-77-FRD). CSA A(L)

Howard Leight Cap-Mounted Ear Muffs

LM-7H is a cap-mounted ear muff that fits most slotted hard-hats. No tools required. Lightweight, comfortable and extremely effective. Noise reduction rating NRR 25 dB. Available in Glo-Orange. CSA A

Howard Leight Super Multi-Position Ear Muffs

LM-7 is a multi-position ear muff with a 360 degree rotating headband. Dielectric, extremely effective and incredibly comfortable. Can be worn for long periods of time due to low headband pressure and specially designed cushions. Noise reduction rating NRR 26 dB, SNR 28 dB. Available in Saturn Yellow (LM-7-YL). CSA A

Howard Leight Pro Earmuff

• Padded headband provides a comfortable fit.
• Foam vinyl cushions help distribute pressure evenly around outer ear.
• NRR 29.

3M™ Peltor™ ProTac III Headset,Black,Headband

• Professional-Quality Hearing Protection (26dB NRR)
• Environmental microphones for level-dependent hearing protection and ambient listening.
• 3.5 mm listen-only stereo input for connection to external devices (e.g. cell phone, two-way radio, Ipod).
• Voice guided menu system for ease of use and adjusting settings.
• Auto power off, the headset will turn off after 4 hrs of non-use to save battery.
• Low-battery warning to inform you when to change batteries
• To reduce corrosion caused by sweat and moisture, the electronics are located in a separate compartment of the cup
• Available in both in headband and hard hat attached versions (black).
• Occupational use only.

The ProTac III hearing protector helps protect against hazardous and nuisance noise, while allowing environmental sounds to be reproduced by the electronic circuit, limited to 82dB. ProTac III helps protect hearing from impulse noise and increases the ability to communicate with nearby colleagues, as well as hear warning signals, approaching vehicles, and sounds in machines and processes.

A great value in electronic level-dependent hearing protection, 3M™ PELTOR™ is a leading brand in electronic level-dependent hearing protection for professionals who have an occupational exposure to steady state or impulse noise. The ProTac III helps protect workers' hearing and allows them to listen to important ambient sounds (at a maximum level of 82dB), allows them to communicate with colleagues, hear warning signals and approaching hazards, while protecting their hearing. Key Features - Environmental microphones for level-dependent hearing protection and ambient listening.

• 3.5 mm listen only stereo input for connection to external devices (Smartphones, shoulder microphones, etc.).
• Voice guided menu system.
• Auto power off: The headset will turn off after 4 hrs of non-use to save battery.
• Low-battery warning.
• To reduce the corrosion caused by sweat and moisture, the electronics are located in the outer part of the cup.
• Available in both in headband and hard hat attached (black).
• Available in two different cup sizes: Slim cups for compatibility with other head borne PPE and full cups that provide a higher NRR.
• 21dB NRR; occupational use only.

Specifications

3M™ PELTOR™ Earmuffs X4P5E, Forestry Orange, 10 EA/Case

• Electrically insulated: Appropriate for a wide range of applications*
• Forestry Orange Color: Aligns with industry standard coloring
• High-performance arms: Balance durability and flexibility
• Easy click in/ click out: Move cups on and off ears easily
• Convenient storage: Store with cups clicked in or out
• Compatibility with hard hats: Designed for use with a standard hard hat slot**
• Fit can be confirmed: Verify with 3M™ E-A-Rfit™ Dual-Ear Validation System***
• X4 products are slim relative to their level of attenuation: Protection without all the bulk
• *These earmuff cups are made of non-conductive (sometimes referred to as “dielectric”) material while the metal components of the headbands and the helmet attachment mechanisms are covered in non-conductive material. This product was found to be electrically insulated, withstanding a voltage up to 1.2 kV, at an external laboratory against a modified test method based on EN 397:2012 under dry conditions. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested and approved. **This product was designed and tested with a 3M Hard Hat H700. For information on other hard hat models contact 3M. ***3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earmuff fit, earmuff fitting skill and motivation of the user. If NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations.

3M™ PELTOR™ Earmuffs X4P5E Forestry Orange are lightweight, low- profile, helmet attach earmuffs that offer a high level of protection with orange coloring to improve visibility.

3M™ PELTOR™ Earmuffs X4P5E Forestry Orange: • NRR 25 dB o Appropriate for mid to high level noise environments • Forestry Orange Coloring o Good for use in forestry and landscaping segments • Low-profile cup design o Improved compatibility with other personal protection equipment • Optimized for use with hard hats rated for electrical insulation o Great for verticals such as Utilities, Mining, O&G and Electrical Contractors • Good headband force and consistent attenuation after extended wear o Attachment System holds up as well as P3E, even after thousands of uses • Minimal flexing of arms for click in/out o Arms maintain proper shape when clicking in/out o Simple and quick movement to get ear cup on and off the ear • Earmuffs can be stored in usage, standby or up position; P3 can only be stored in usage position o Flexibility to store in convenient position •P5E and P3E earmuffs use the same slot attachment mechanism o Most users will not need to change hard hats if purchasing a P5 product • Earmuffs can be tested using the 3M™ E-A-Rfit™ Dual-Ear Validation System o Knowing workers’ PAR (personal attenuation rating) confirms appropriate protection and allows for proper documentation

Specifications

3M Peltor Optime 101 Earmuffs H7A Over The Head

• Earmuffs recommended for TWA noise exposures up to 101 dBA.
• Stainless steel headband distributes weight for low pressure fit.
• Earcup pivot points tilt for comfort that adjusts to individual wearers.
• Noise Reduction Rating (NRR) 27 decibels.
• Earcups with liquid and foam filled cushions offer comfort for long wear and optimum seal.

3M™ Peltor™ Optime™ 101 over-the-head earmuffs feature a stainless steel headband for consistent force and effective hearing protection.

For noise levels up to 101 dBA, these over-the-head earmuffs provide effective hearing protection. - Stainless steel headband distributes weight for low-pressure fit. - Earcup pivot points that tilt for optimum comfort and efficiency. - Liquid/foam filled earmuff cushions. - Color-coding for compliance sighting. - Noise Reduction Rating (NRR)*: 27dB. CSA Class A. *The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided. 3M is Leading the Advancement of Hearing Conservation™.

Specifications

3M™ PELTOR™ Optime™ 105 Earmuffs H10P3E, Hard Hat Attached

• For noise levels up to 105 dBA.
• Easy cap-mount design.
• Liquid/foam filled earmuff cushions.
• Noise Reduction Rating (NRR)*: 27dB. CSA Class AL.

3M™ Peltor™ Optime™ 105 cap attached earmuffs feature double-shell technology to provide effective hearing protection.

For noise levels up to 105 dBA, these cap attached with double-shell technology to provide effective hearing protection.

• Proprietary Twin-Cup^™ design has soft, foam-filled earmuffs.
• Easy cap-mount design.
• Earcup pivot points that tilt for optimum comfort and efficiency.
• Liquid/foam filled earmuff cushions.
• Color-coding to help match attenuation needs.
• Noise Reduction Rating (NRR)*: 27 dB. CSA Class AL.

*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

3M is Leading the Advancement of Hearing Conservation^™.

Specifications

Moldex MX‐5 Earmuff, NRR 27

Features

• Soft cushion-ribbed headband for cool comfort all day long.
• Overmolded headband is durable for rugged wear over many shifts.
• Larger ear cushions allow freedom to fit almost all ears comfortably.
• Lightweight wire frame allows easy cup adjustment yet holds its position for lasting comfort.
• Cool looks and comfort to promote worker acceptance and compliance.
• Extra soft foam/low pressure cushions and headband.
• Glossy surface for easy cleaning and longer wear.
• NRR independently tested to ANSI S3.19-1974 for protection you can count on.
• 100% PVC-Free, like all Moldex products & packaging - for a greener alternative.

Advantages

Cool & Comfortable

The cushion-ribbed headband allows cool comfort all day long and the non-slip wire makes
adjustments easy. The larger cup openings are designed to fit most ear sizes. Plus it features a sharp, cool look for increased compliance.

Ready For Rugged Use

Overmolded headband is durable for rugged wear over many shifts and does not have a seam that can split open over time.

Lightweight Wire Frame

Lightweight wire frame allows easy cup adjustment, yet holds its position for lasting comfort.

Independently Tested NRRs

All Moldex hearing protection is independently tested to ANSI S3.19-1974 by Michael & Associates, Inc., State College, PA

Specifications