BLS Dust Filter 401 P3 R

Single Filters With Threaded EN148-1 Universal Connection BLS 400 series filters are available with different protection combinations. They are compatible with all respiratory protection devices thanks to the universal EN148-1 threaded connection Standard thread connection according to EN 148-1, universal among all respiratory protection devices. Filtering efficiency is 99,99%. The integrity of the filtering material is ensured by a protective mesh.

• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46 (pg24).
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C) (pg30).
• Full Face Mask Respirators BLS 3000 SERIES (pg33).

Certification

• Certified according with the European Regulation 425/2016 (Personal protective equipments).
• Certified as PPE of III category, in presumption of conformity to harmonized standard EN 143:2000 + A1:2006 and EN 14387:2004 + A1:2008.
• Certified and controlled according to Annex D by Italcert S.r.l. (Notified Body n°0426).

Specifications

BLS Filter 412 AX

Characteristics

The 412 AX filter is an anti gas and anti particles filter that protects against contaminant gases. 412 filter is equipped with a standard threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask equipped with the same standard connection.

Application

The 412 filter that protects from organic gases and vapours with a boiling point below than 65°C. It can be used only once. It is a filter classified as class 2 (medium efficiency filter) against gases.

Exposure limit for filter 412 AX

• With half masksfor gases and vapours 30 x TLV.
• with full face mask: for gases an vapours until to 400* x  TLV;.

• * = APF (Assigned Protection Factor) as detailed in EN 529:2005 standard.
• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46.
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C).
• Full Face Mask Respirators BLS 3000 SERIES.

Certification

• The 412 AX filter is CE marked as a PPE of III category, as provided by the 89/686/EEC European Directive (In italy D. Lgs 475/1992), according to the EN 14387:2004+A1:2008 technical standard.
• The compliance model PPE (Art. 10) and the monitored production control (Art.11.B), are certified by Italcert S.r.l., Notified Body n°0426.
• BLS is a company with a quality management system certified according to the ISO 9001:2008 standard.

Specifications

BLS Filter 414 A2B2E2

Characteristics

The 414 filter is an anti gas filter that protects against contaminant gases. 414 filter is equipped with a standard
threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask
equipped with the same standard connection.

Application

The 414 filter that protects from organic gases and vapours, inorganics acids and gases, sulphur dioxide; gases must have a boiling point upper than 65°C. It is a filter classified as class 2 (medium efficiency filter) for the
anti gas part.

Exposure limit for filter 414

• with half mask: until to 30* x TLV.
• with full face mask: until to 400* x TLV.

Protection

• * = APF (Assigned Protection Factor) as detailed in EN 529:2005 standard.
• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46.
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C).
• Full Face Mask Respirators BLS 3000 SERIES.

Certification

• The 414 filter is CE marked as a PPE of III category, as provided by the 89/686/EEC European Directive (In italy D. Lgs 475/1992), according to the EN 14387:2004+A1:2008 technical standard.
• The compliance model PPE (Art. 10) and the monitored production control (Art.11.B), are certified by Italcert S.r.l., Notified Body n°0426.
• BLS is a company with a quality management system certified according to the ISO 9001:2008 standard.

Specifications

BLS Filter 415 A2B2E2K2

Characteristics

The 415 filter is an anti gas filter that protects against contaminant gases. 415 filter is equipped with a standard
threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask
equipped with the same standard connection.

Application

The 415 filter that protects from organic, inolrganic and acid gases and vapours, sulphur dioxide, amonia and its
derivates; gases must have a boiling point upper than 65°C. It is a filter classified as class 2 (medium efficiency
filter) for the anti gas part.

Exposure limit for filter 415

• with half mask: until to 30* x TLV.
• with full face mask: until to 400* x TLV.

BLS Filter 422 AX P3 NR

Characteristics

The 422 filter is an anti gas and anti particles filter that protects against contaminant gases and airbone dusts. 422 filter is equipped with a standard threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask equipped with the same standard connection.

Application

The 422 filter that protects from organic gases and vapours with a boiling point upper than 65°C. It can be used with substances as solvents, toxic particles and microorganisms.It is a filter classified as class 2 (medium efficiency filter) for the anti gas part and class 3 (high efficiency filter) for the anti dust part.

Exposure limit for filter 422

• With half masks: for gases an vapours until to 30* x TLV; for dusts, fumes and mists 30* x TLV
• With full face mask: for gases an vapours until to 400* x TLV; for dusts, fumes and mists 400* x TLV
  
  

BLS Filter 423 A2B2E2 P3 R

Characteristics

The 423 filter is an anti gas and anti particles filter that protects against contaminant gases and airbone dusts. 423 filter is equipped with a standard threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask equipped with the same standard connection.

Application

The 423 filter that protects from organic, iinorganic, acid gases and vapours and sulphur dioxide. Gases must have a boiling point upper than 65°C. It can be used with substances as solvents, toxic particles and microorganisms.It is a filter classified as class 2 (medium efficiency filter) for the anti gas part and class 3 (high efficiency filter) for the anti dust part.

Exposure limit for filter 423

• with full face masks: for gases an vapours until to 400* x TLV; for dusts, fumes and mists 400* x TLV
  
  

Protection

• * = APF (Assigned Protection Factor) as detailed in EN 529:2005 standard.
• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46.
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C).
• Full Face Mask Respirators BLS 3000 SERIES.

Certification

• The 423 filter is CE marked as a PPE of III category, as provided by the 89/686/EEC European Directive (In italy D. Lgs 475/1992), according to the EN 14387:2004+A1:2008 technical standard.
• The compliance model PPE (Art. 10) and the monitored production control (Art.11.B), are certified by Italcert S.r.l., Notified Body n°0426.
• BLS is a company with a quality management system certified according to the ISO 9001:2008 standard.

Specifications

BLS Filter 424 A1B1E1K1/P3

Characteristics

424 ABEK1P3 R filter is a combined filter and is consists of a gas filter combined with a particle filter, so it protects against both gas (gases, vapours) and particle (dusts, fumes, mists) pollutants. 424 ABEK1P3 R filter is
equipped with a standard thraded connection conforming to EN 148-1 standard and it’s possible to use it on half mask and full face mask equipped with the same standard connection.

Application

424 ABEK1P3 R filter protects against organic compounds with a boiling point above 65°C, inorganic and acid gases and vapours as well as ammonia and organic ammonia derivatives and solid and liquid hazardous particles, and it can be used in the presence of sunstances as solvents, hydrochloric acid, chlorine, ammonia, sulphur dioxide, etc. It is classified in terms of capacity as a class 1 gas filter (low capacity filter) and in terms of filtering efficiency as class P3 particle filter (high efficiency filter).

Exposure limit for filter 424 ABEK1P3 R

• with half mask: for gas and vapours 30* x TLV or 5000 ppm considering as limit the lower value; for particles 30* x TLV.
• with full face mask: for gas and vapours 400* x TLV or 5000 ppm considering as limit the lower value; for
  particles 400* x TLV.

Protection

• * = APF as shown in EN 529:2005 standard (value for Italy).
• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46.
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C).
• Full Face Mask Respirators BLS 3000 SERIES.

Certification

• 424 ABEK1P3 R filter meets the requirements of EN 14387:2004 standard and is CE marked, as provided by
  the 89/686/EEC European Directive, as a PPE of III category.
• CNMP (Notified Body n°0159) is the responsible of the certification (Art. 10) and of the final product control (Art.11.A).
• All the products are manufactured in a company that is ISO 9001:2008 certified.

Specifications

BLS Filter 425 A2B2E2K2P3 R

Characteristics

The 425 filter is an anti gas and anti particles filter that protects against contaminant gases and airbone dusts. 425 filter is equipped with a standard threaded connection conforming to EN 148-1 standard and it’s possible to use it on half mask but not on full face masks.

Application

The 425 filter that protects from organic, inorganic and acid gases and vapours, sulphur dioxide, ammonia and its
derivatives. Gases must have a boiling point upper than 65°C. It can be used with substances as solvents, toxic particles and microorganisms.It is a filter classified as class 2 (medium efficiency filter) for the anti gas part and class 3 (high efficiency filter) for the anti dust part.

Exposure limit for filter 425 A2B2E2K2P3 R

• with full face mask: for gases an vapours until to 400* x TLV; for dusts, fumes and mists 400* x TLV

Protection

• * = NPF (Nominal Protection Factor) as detailed in EN 529:2005 standard.
• Filter cannot be used with half masks because their weight is greater than 300g.
• Filter are tested against hydrogen fluoride.

Compatible with

• Half Mask Respirators BLS SGE46.
• Full Face Mask Respirators BLS 5000 SERIES (5150, 5400, 5400C).
• Full Face Mask Respirators BLS 3000 SERIES.

Certification

• The 425 filter is CE marked as a PPE of III category, as provided by the 89/686/EEC European Directive (In italy D. Lgs 475/1992), according to the EN 14387:2004+A1:2008 technical standard.
• The compliance model PPE (Art. 10) and the monitored production control (Art.11.B), are certified by Italcert S.r.l., Notified Body n°0426.
• BLS is a company with a quality management system certified according to the ISO 9001:2008 standard.

Specifications

BLS Filter 202 P3 R

Characteristics

202 P3 R is a particle filter that protects from airborne particles. 202 P3 R filter is equipped with a special
bayonet connection to be used twin on half masks EVO S and EVO R.

Application

202 P3 R filter protects against all the toxic particles, solvents and micro organism It is a filter classified in class
3 (high efficiency filter).

202 P3 R filter can be used lower than the following limits

• With half mask: against gas and vapours until to 30* x TLV; for dusts, fumes and mists until to 30* x TLV.
• with full face mask: against gas and vapours until to 400* x TLV; for dusts, fumes and mists until to 400* x
  TLV.

Protection

• * = FPA as defined by EN 529:2005 standard.
• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Certification

• 202 P3 R filter has been certified according to the EN 143:2000/A1:2006 European Standard and it has the CE marking according to the European Directive 89/686/EEC, as a PPE of III category. Italcert Srl ,Notified Body n°0426, is the responsible of the certification (Art. 10) and of the final product control (Art. 11.B).
• BLS is a company with quality management system certified according to ISO 9001:2008

Specifications

BLS Filter 212 AX

Protects against organic gases and vapors with a boiling point lower than 65 °. BLS filter 212 AX is suitable for BLS mask 4000, 5600 and 5700.

Under the heading download with more information you can easily see which BLS filter is suitable for the right protection. The appendix clearly indicates by means of colors and names (which are also on the filter) which filter can best be used for good respiratory protection.

Protection

• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 213 A1B1E1

BLS filter 213 ABE1 protects against organic, non-organic and acid gases and vapors, class 1.Under the heading download with more information you can easily see which BLS filter is suitable for the right protection. The appendix clearly indicates by means of colors and names (which are also on the filter) which filter can best be used for good respiratory protection.

Protection

• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 214 A1B1E1K1

Characteristics

The filter 214 is a gas filter and protects against gaseous contaminants. The filter 214 is equipped with a bayonet connection which allows to use, in pairs, on half masks and full face masks equipped with compatible connection.

Application

The filter 214 is a filter that protects against organic gases and vapors, inorganic gases and acids, from sulfur dioxide and ammonia vapors and its derivatives; gases must have a boiling point above 65 °C.

Exposure limit filter 214

• with half masks: for gases and vapors * 50 x TLV;.
• with full face masks: for gases and vapors 2000 * x TLV.

Protection

• * = FPN (nominal protection factor) as specified in EN 529:2005.
• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Specifications

BLS Filter 222 A1B1E1K1/P3 R

Characteristics

222 ABEK1P3 R is an anti gas and anti particles filter, so it protects against both gas and pollutant particles. 222
ABEK1P3 R filter is equipped with a special bayonet connection allowing to use it, in pair, on half masks EVO R or EVO S and on full face masks with the same connection.

Application

222 ABEK1P3 R filter protects against organic, inorganic and acid gases and vapours as well as ammonia and
organic ammonia derivatives; gases must have a boiling point higher than 65°C. It can be used in the presence of substances as solvents, toxic particles and micro organisms etc. It is classified in terms of capacity as a class 1 anti gas filter (medium Capacity filter) and as class P3 anti particles filter (high efficiency filter).

Exposure limit for 222 A1B1E1K1P3 R filter

• with half mask: for gas and vapours 30 x TLV; for dusts, fumes and mists until 30 x TLV.
• with full face mask: for gas and vapours 400 x TLV; dusts, fumes and mists until 400 x TLV.

Protection

• * APF as defined in EN 529:2005 standard.
• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Certification

• 222 ABEK1P3 R filter meets the requirements of EN 14387:2004+A1:2008 standard and is CE marked, as
  provided by 89/686/EEC European Directive (in Italy D.Lgs. 475/1992), as a PPE of III category.
• Italcert (Notified Body n° 0426) is the responsible of the certification (Art. 10) and of the final product control (Art.11.B) .
• All the products are manufactured in a company that is ISO 9001:2008 certified.

Specifications

BLS Filter 225 AXP3 NR

Protects against organic gases and vapors with a boiling point lower than 65 ° C and dust. BLS filter 225 AXP3 R is a filter for face masks for good respiratory protection.BLS filter 225 is suitable for the BLS face masks types 4000, 5600 and 5700. Under the heading download with more information you can easily see which BLS filter is suitable for the right protection. The appendix clearly indicates by means of colors and names (which are also on the filter) which filter can best be used for good respiratory protection.

Protection

• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 226 ABE1P3 R

Characteristics

226 is filter against gases and particles, so it protects against both gas and pollutant particles. 226 filter is equipped with a special bayonet connection allowing to use it, in pair, on half masks EVO R or EVO S and on full face masks with the same connection.

Application

226 filter protects against organic, inorganic and acid gases and vapours gases must have a boiling point higher than 65°C. It can be used in the presence of substances as solvents, toxic particles and micro organisms etc.
It is classified in terms of capacity as a class 1 gas filter (medium Capacity filter) and as class P3 particles filter (high efficiency filter).

Exposure limit for 226 ABE1P3 R filter

• with half mask: for gas and vapours 30 x TLV; for dusts, fumes and mists until 30 x TLV.
• with full face mask: for gas and vapours 400 x TLV; dusts, fumes and mists until 400 x TLV.

Protection

• * APF as defined in EN 529:2005 standard.
• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 242 A2B2E2

Particle filter against toxic coarse and fine dust particles.  Ideal for asbestos removal and the general construction industry.  The practical bayonet system is easy to use and saves time.

Protection

• * APF as defined in EN 529:2005 standard.
• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 243 ABEK2

Protection

• Filters cannot be used with half masks because their weight is greater than 300g.
• Filters are tested against hydrogen fluoride.
• Filters are tested against formaldehyde.
• Dust prefilter mounted on 211, 213, 214, 241, 243, 244.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Specifications

BLS Filter 253 A2B2E2P3 R

With features such as high efficiency, ease of use and safety the filters of this series are the best offered by BLS, protecting from gases and vapours as well as toxic particulates.

Bayonet Connection

This connection is highly intuitive allowing a quick and safe hold on the mask. It has a locking feedback allowing the user to know if the filter has been properly placed.

Tested On Formaldehyde

Specific tests show that ABEK and ABE special BLS carbons are capable to guarantee protection from formaldehyde. Even with class 1 filters it’s possible to achieve proper protection. At the end of the test the detected concentration of formaldehyde at the end of the filter is lower than half the Threshold Limit Value according to NIOSH TEB-APR-STP-0039A (Breakthrough Point).

Filter Canister

Made of non deformable ABS allows to have a absolute control over the compression of the activated carbon grains within, this way air corridors are completely avoided making the filter 100% safe.

Materials

• Filter’s Canister : Acrylonitrile butadiene styrene (ABS).
• Dust Filtering Material : Pleated fiber mesh.
• Gases And Vapours Filtering Material : Activated carbons grains.

Storage

• Shelf-Life : 5 years.
• Temperature : -10° / +50° C.
• Relative Humidity : 70% max.

Certification

BLS filters are:

• Certified according with DIR 89/686.
• Certified as PPE of III category, in presumption of conformity to harmonized standard EN 49:2001+A1:2009.
• Certified (Art. 10) and controlled (Art. 11.B) by Italcert S.r.l. (Notified Body n°0426).
• CE marked.
• BLS management system is ISO 9001:2008 certified.

Specifications

BLS Particles Prefilter 301 P2 NR

Characteristics

301 P2 NR is a particle filter made by layers of polypropilene fiber tissue that mechanically filters solid and liquid hazardous particulates. 301 P2 NR filter is equipped with a special hook to be used twin, on all BLS 300 series filters.

Application

301 P2 NR filter protects against hazardous dusts, mists and fumes, for example hazardous metals dusts, biochemical substances and biologically active aerosols. It is a filter classified as P2 class.

301 P2 NR filter can be used for protection against dusts, fumes and mists in concentration lower than the following limits

• with half mask: until to 10* x TLV.
• with full face mask: until to 15* x TLV.

Protection

• * = FPA as defined by EN 529:2005 standard.
• Filters cannot be used with half masks because their weight is greater than 300g.
• These filters are tested against hydrogen fluoride.
• Dust prefilter mounted on 311, 313, 314.

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700, 5700/C).

Certification

• 301 P2 NR filter has been certified according to the EN 14387:2004 European Standard and it has the CE marking according to the European Directive 89/686/EEC, as a PPE of III category.
• Italcert Srl (Notified Body n°0426) is responsible of the certification (Art. 10) and of final product control (Art. 11.B).
• The products are manufactured in a company that is EN ISO 9001:2008 and ISO 13485:2004 certified.

Specifications

BLS Dust Filter 201-3

BLS is an Italian company that mostly manufactured private label products in the past. This means that they developed and produced products that were sold under another company’s brand. They recently started a sales office in the Netherlands to promote their own range of high quality products. Because the BLS respirators require to be used with two filters, they are sold in pairs. Those P3 filters have a very low breathing resistance, offering optimal performance.

Protection

• With activated carbons to protect from both organic and acid gases and vapours and ozone, in concentrations lower than the threshold limit value of exposure (TLV).

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700).

Certification

• BLS filters are: Certified according with DIR 89/686. Certified as PPE of III category, in presumption of conformity to harmonized.
• Standard EN 149:2001+A1:2009. certified (Art. 10) and controlled (Art. 11.B) by Italcert S.r.l. (Notified Body n°0426). CE marked.
• BLS management system is ISO 9001:2008 certified.

Specifications

BLS Dust & Nuisance Filter 201-3C

BLS is an Italian company that mostly manufactured private label products in the past. This means that they developed and produced products that were sold under another company’s brand. They recently started a sales office in the Netherlands to promote their own range of high quality products. Because the BLS respirators require to be used with two filters, they are sold in pairs. Those P3 filters have a very low breathing resistance, offering optimal performance.

Protection 

• With activated carbons to protect from both organic and acid gases and vapours and ozone, in concentrations lower than the threshold limit value of exposure (TLV).

Compatible with

• Half Mask Respirators BLS 4000 Series.
• Full Face Mask Respirators BLS 5000 Series (5600, 5700).

Certification

• BLS filters are: Certified according with DIR 89/686. Certified as PPE of III category, in presumption of conformity to harmonized.
• Standard EN 149:2001+A1:2009. certified (Art. 10) and controlled (Art. 11.B) by Italcert S.r.l. (Notified Body n°0426). CE marked.
• BLS management system is ISO 9001:2008 certified.

Specifications